1 / 35

Education Central Engage, Apply, Retain - PowerPoint PPT Presentation

  • Uploaded on

Education Central Engage, Apply, Retain. Emerson 6” Series Thermostats Homeowner Support Hotline: 800-284-2925. Note: This module covers common elements. Refer to Specification Sheet or Installation Instructions for detailed information.

I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
Download Presentation

PowerPoint Slideshow about ' Education Central Engage, Apply, Retain' - sean-morrow

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.

- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript
Education central engage apply retain



Engage, Apply, Retain

Emerson 6” Series


Homeowner Support Hotline:


Note: This module covers common elements. Refer to Specification Sheet or Installation Instructions for detailed information.

Emerson 6 thermostats selecting the right thermostat for the job
Emerson 6” ThermostatsSelecting the Right Thermostat for the Job

6 series thermostats agenda
6” Series Thermostats Agenda

  • Applications

  • Wiring

  • Configuration

  • Programming

  • Featured Products In This Module

    • 1F98EZ-1621

      • 4 Wire Universal

    • 1F95-0680

      • Commercial, Universal

    • 1F95EZ-0671

      • Easy Reader, Universal

Comfort Interface

Equipment Control


Look at the box for detailed information
Look at the Box for Detailed Information

Staging By System Type

Programming Options


Terminal Identification

Part Number

6 series thermostat overview
6” Series Thermostat Overview

  • Intuitive operating choices

    • One Button – One Function

  • Universal Up to 4 heat / 2 cool

  • Large, Easy to Read Characters

    • Easy to view without glasses

  • Simple-to-use Non-Programmable Thermostat

    • 7-day programming can be enabled if desired

  • Dual Fuel Capable with Smart Fuel™ Logic Program

    • No outdoor sensor need for Furnace / Heat Pump Systems

    • No Fossil Fuel Kit Required

6 series specification sheets contain detailed information
6” SeriesSpecification Sheets Contain Detailed Information

Education central engage apply retain

6” Series Terminal Designations

6 series heat pump dual fuel staging detail
6” Series Heat Pump / Dual Fuel Staging Detail

Dual fuel option de-energizes any compressor stage when auxiliary heat is energized

Power stealing assist extends battery life
Power Stealing Assist Extends Battery Life

Not available on the Easy Reader 1F95EZ-0671

  • Power Stealing Assist extends battery life significantly by drawing “stealing” small amounts of voltage from the heat (W) or cool (Y) circuit. Power Stealing Switches on the back of the thermostat should be left in the “ON" position for most systems.

  • On a small number of heating or cooling systems with high impedance electronic modules you may observe one of the following conditions:

    • The furnace , draft inducer or fan run or continue running when the thermostat is not calling for operation. Switch the “W” dip switch to OFF.

    • If the condition continues to occur switch the “Y” dip switch to OFF to disable Power Stealing Assist completely and operate the thermostat on batteries only.

  • If the Power Stealing Assist method is not compatible with your system both switches can be turned off and the thermostat will operate normally.

6 series wiring for conventional systems ac furnace no heat pump
6” Series Wiring for Conventional Systems- AC Furnace (No Heat Pump)

Single Stage (SS) in Red

Multi-Stage (MS) add Orange


#6 Terminal is for a 3 wire zone valve

* Common connection optional – required for diagnostic indicator

** For two transformer systems remove the jumper

6 series wiring heat pump
6” Series Wiring Heat Pump

Single Stage (HP1) in Red

Multi-Stage (HP2)) and Green


6 series easy viewer configuration
6” Series Easy Viewer Configuration

Four Thermostats in One

6 series navigation
6” Series Navigation

Battery Status

= Full Charge

= Half Capacity

Change = Replace


Actual Room Temperature

Desired Temperature

Temperature Adjustment


Menu Button

Indicates HeatPump

System(does not appear

for multi-stage or

single stage


Run Button

Button Labels

Solid colored labels

Indicate selection is On.

Non-solid or outlined labels

Indicate not selected of Off.

(Heat is on in this example)

Fan Button

Press to select Fan operation

Fan = Fan On/Continuous Fan

= Fan Auto – Fan runs only

during a call for Heat or Air

Conditioning (typical setting)

Heat Button

Press to select


Off Button

Press to turn off both

Heating and Air

Conditioning systems

and Fan

A/C Button

Press to select

Air Conditioning


6 entering system configuration
6” Entering System Configuration

2. Press and hold the MENU button for five seconds

Most technical service calls are the result of improper system configuration

1. System must be in HEAT or A/C Mode

Education central engage apply retain

6” Application Specific

Versus Customization—Don’t Go Overboard!

After steps 1 and 2,

Press RUN to get the system running quickly

1. Choose System

2. Select Fan Function

Choose your system
Choose Your System

Press Up / Downto select system type

Press MENUto go to Step 2

Select fan function
Select Fan Function

Press Up / Down to select

If there is Gas Heat in the system, leave on Gas (default)

Press Menu to go to additional configuration options

Press Run to complete initial configuration

Configuration punch list
Configuration Punch List

Record settings of key items for Homeowner Reference

Education central engage apply retain

6” ConfigurationItems That Are APPLICATION CRITICAL

Denotes Critical to the Application

Education central engage apply retain

Configuration Menu,Denotes Critical to the Application Denotes not application critical but an option you may want to consider

EMRstarts system before program time

Application Specific Set By Installer

Configuration options
Configuration Options

CO gives you a Fan On / Off delay in cooling

Configuration options1
Configuration Options

Aux. heat comes on if the temp is manually raised a few degrees

Control energy costs and childproof a thermostat

Configuration options2
Configuration Options

Application Specific Set By Installer (HP1 or HP)

Two options for staging
Two Options for Staging

  • Smart Logic (Computed Staging)

    • Easy Viewer tracks system performance and calculates optimum time to bring on additional stages (0 to 30 minutes) .

      • Note: Depending on system performance the time for staging will vary depending on the algorithm software. The calculation is not purely time nor temperature based. Staging times are going to vary from day to day.

      • Gives homeowner the choice of cost savings or comfort

  • Fast Second Stage (Optional feature)

    • Brings additional heat stage when temperature is manually raised 3°F

    • Gives homeowner optimal comfort

For initial startup, configure for Fast Second Stage to save time evaluating system operations

Staging logic versus outside sensor
Staging Logic versus Outside Sensor

  • Dual Fuel Applications (Optional)

    • Easy Viewer uses its Smart Logic to manage coordination of heat pump and furnace operation. When the Dual Fuel stages are called for the Easy Viewer will shut down the compressors on the heat pump.

      Without the use of an outdoor sensor and a fossil fuel kit

      • If you normally use an outdoor sensor and a fossil fuel kit for dual fuel applications the Easy Reader is a great solution!

      • Think of the time and money you will save on the next installation.

6 dual fuel settings no sensor req
6” Dual Fuel Settings—No Sensor Req.

  • The Dual Fuel Logic allows control of a heat pump with fossil fuel backup heat without the use of a fossil fuel kit. When fossil fuel is called for the thermostat will turn off the compressor and switch to gas heat automatically using the Dual Fuel Logic algorithm.

  • Access the Configuration Menu Step 20

    • The dual fuel setting options range is 0 to 9

      • 0 is default Off allowing electric heat to be used

    • Settings of 1 to 9 is a value used in the software algorithm.

      • Up for Comfort

        • Increasing the value up to the max of 9 will result smaller staging separation

      • Down for Energy Savings

        • Decreasing the value to a minimum of 1 will result in larger separation

  • Select Compressor Delay – When dF is enabled, the shut down of the compressor(s) is delayed for a time period after the auxiliary stage is energized. This delay, Cd, is factory set at 60, but can be set in the range of 0 to 99 seconds by using thePLUS or MINUS touchpad's .

6 program worksheet

Technical Service has never spoken to anyone who could not program the thermostat once they filled out the schedule worksheet in the manual and KEPT it.

Save a call back and fill it out with the homeowner. Ensure they have the Homeowner Support Hotline:


6” ProgramWorksheet

6 home screen
6” Home Screen program the thermostat







Programmed Period

Day of Week

Buttons used for Forward or Back

Time of Day

Button used for Scheduling


Heat Pump Only(to energize AUX press and hold HEAT button for 5 seconds)

Programmable Mode

6 set time and day
6” Set Time and Day program the thermostat

In Heat or AC, press Menubutton

Press the Time button to display hour and A or P

Press the UP/DOWN button to set correct hour and AM or PM

Press Time to display minutes

Repeat steps 3 and 4 to set minutes, year, month and day of week

Press Run to return to home screen






6 configure program options
6” Configure Program Options program the thermostat

  • System must be set for Heat or Cool. Press the Menu button for at least 5 seconds.

  • The display will display step #1 in the configuration menu

  • Press the UPbutton to the configuration Menu No

    • Select the programs per week by pressing UP/DOWN button

      • “0” for non-programmable

      • “7” for independent program days

  • Press the UPbutton to the configuration Menu No

    • Select the programs per day by pressing UP/DOWN button

      • “2” for Morn/Eve program periods per day

      • “4” for Morn/Day/Eve/Night program periods per day

  • Press Run

6 how to set a program
6” How to Set A Program program the thermostat







  • In Heat mode, press the MENUbutton to display additional button choices.

  • Press Sched button. The display will show the day being programmed and the time and desired temperature for the period. Either “Day” for two period configuration or “Morn” for four period configuration will be displayed to indicate the period. “Heat” is displayed indicating the mode being programmed.

  • Press the UP/DOWN button to change the temperature to your selected temperature for the 1st. Heating period.

  • Press the TIME button to toggle between Time and Temperature. Press the UP/DOWN buttons to adjust the start time for the period in 15 minute increments.

  • Press Sched to advance to the next program period.

  • Repeat steps 3 through 5 until all of the program times and temperatures are set for all program periods for that day.

  • Use the Copy button to copy current day’s program to any other day or press Adv Day and repeat steps 3 through 6 until all programs are entered.

  • Press Run to complete programming







Adv Day



Features your customer should be aware of
Features Your Customer Should Be Aware Of program the thermostat

  • Auxiliary Heating (Equivalent to Emergency Mode)

    • To turn on – Hold Heat button for 5 seconds

    • (Heat Pump) changes to bold (Aux Heat On)

  • Temporary Temperature Hold (2 hours)

    • Press the Up or Down button to change the temp.

  • Permanent Temperature Hold (Indefinitely)

    • Press the Up or Down button to change the temp.

    • Press the Hold button to complete

  • Systems Diagnostics

    • “Call for Service” will display if your system has diagnostic capabilities and is wired to the “L” terminal



Power to “L” triggers


Troubleshooting tips
Troubleshooting Tips program the thermostat

  • “My thermostat brings on 2nd stage too fast! I don’t want to use the expensive back-up heat”

    • Solution: Homeowner needs to lower temperature settings to avoid use of that stage of heat.

  • “My thermostat won’t bring on 2nd stage, even when I raise the temperature a few degrees, for 15 or 20 minutes sometimes”

    • Solution: Turn on the fast 2nd stage.

  • “I’ve been timing the thermostat to see when it brings on the back-up heat and writing it down. This thing is possessed”

    • Solution: Put down the stop watch. It is a complicated calculation, not solely time or temperature based.

Some things to remember
Some Things To Remember program the thermostat

  • Most common mistake is not choosing correct configuration for the application

    • SS, MS, HP1, HP2

  • Easy Reader does not have Staging Indicators

    • Designed intentionally for simplicity of operation

  • Easy Reader ships as a Non-Programmable

    • Ask the homeowner if they want programmable

  • Dual Fuel can be used on both HP1 and HP2

    • Some think it is only for HP2