Silicone sealants that are coloured are divided into standard colours; they are unique colours and standard colours. When it comes to the standard colours, they do not need any particular treatment before their application, apart from the primary procedures that are usually required even for basic silicone sealants.
If you want to reinforce or reinstall an accessory or vanity in your bathroom, then silicone could prove to be the right sealant.
This may vary, but usually, the tip of a silicone gun has to be cut slightly, but only slightly, enough that a bead of silicone can be squeezed out. Depending on your silicone gun, you may have to remove the seal inside the tube, using something like a long nail.
Evenly, gently and steadily apply the silicone around the area that needs to be sealed, holding the gun at 45 degrees. Release the handle once the area has been sealed to the very end, pulling to avoid an excess string of silicone.
You will eventually have to use your fingers to smoothen out and spread the silicone, so it may strongly bond with the surface and seals it properly.
Silicone Sealant suppliers in UAE recommend its use for bathroom applications because of inconspicuous, smooth and watertight the finish tends to be.