Guide to Powder Coating Oven Building

1. Guide to Powder Coating Oven Building To cure the powder, either an oven or infrared heating is required by powder coating. A household oven as well as a toaster oven are the best choice for smaller parts but it is always restricted to the size of the oven. If you want to begin power coating on large parts, you can either spend a lot of money or make it by yourself. It may be cumbersome if you never do any such project before. There are a lot of guides available on the internet that are helpful to make without a hitch. It is helpful to save money and provides you with the larger powder coating oven. It is easy to build a powder oven as per the size that you need, and also include all features to make it more efficient. A strange about such ovens is that nothing protrudes inside the space of the oven. The whole internal space of the oven is inconsistent. All heating elements are recessed on the walls such as lights, fans, and so on. If you build the oven in such a way, then it enables you to build a rack that strongly fits inside the oven with no wastes at all. Also, you can do powder coating on the rack and then, roll back the same for curing purposes into the oven. However, it increases complications and enhances the material cost required to build the oven. You can select the like this one to save a lot of space or go with the conventional route. Savage Engineered Equipment Williamsport, Pennsylvania, PA 17701 United States Phone: 570-329-6500 Fax: 443-308-4429 PO Box 3162 keith@savage-engineered.com http://www.savage-engineered.com/