1 / 5

Aim

Pushrim biomechanical changes with progressive increases in slope during motorized treadmill manual wheelchair propulsion in individuals with spinal cord injury. Dany H. Gagnon, PT, PhD; Annie-Claude Babineau; Audrey Champagne; Guillaume Desroches, PhD; Rachid Aissaoui, Eng PhD. Aim

sarabailey
Download Presentation

Aim

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pushrim biomechanical changes with progressive increases in slope during motorized treadmill manual wheelchair propulsion in individuals with spinal cord injury Dany H. Gagnon, PT, PhD; Annie-Claude Babineau; Audrey Champagne; Guillaume Desroches, PhD; Rachid Aissaoui, Eng PhD

  2. Aim • Quantify effects of 5 distinct slopes on spatiotemporal and pushrim kinetic measures at nondominant upper limb during manual wheelchair (MWC) propulsion on motorized treadmill in individuals with spinal cord injury (SCI). • Relevance • Most people with SCI will not regain sensorimotor capabilities needed to walk independently or efficiently and must learn to use an MWC.

  3. Method • 18 participants with SCI propelled MWC at self-selected natural speed on treadmill at different slopes (0, 2.7, 3.6, 4.8, and 7.1). • Spatiotemporal parameters, total force, and tangential components of force applied to pushrim (including mechanical effective force) were calculated using instrumented wheel.

  4. Results • Duration of recovery phase: • 54% to ­70% faster as slope increased. • Duration of push phase remained similar. • Initial and total contact angles: • Migrated forward on pushrim. • Final contact angle: • Similar and higher for slopes greater than 0. • Mean total force as slope increased: • 93% to 201% higher. • Mean tangential component of force: • 96% to 176% higher than no-slope propulsion. • 2.7 and 3.6 had similar measures.

  5. Conclusion • Overall, recovery phase became shorter and forces applied at pushrim became greater as slope of treadmill increased during motorized treadmill MWC propulsion.

More Related