1 / 7

Transducers/Sensors: Sample Device Thermistor

Transducers/Sensors: Sample Device Thermistor. A thermistor is a temperature-sensing element composed of semiconductor material (typically a mix of metal oxides) that exhibits a large change in resistance in response to a small change in temperature

samuru
Download Presentation

Transducers/Sensors: Sample Device Thermistor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Transducers/Sensors: Sample DeviceThermistor • A thermistor is a temperature-sensing element composed of semiconductor material (typically a mix of metal oxides) that exhibits a large change in resistance in response to a small change in temperature • Thermistors usually have negative temperature coefficients, the resistance of the thermistor decreases as the temperature increases (Positive temperature coefficient thermistors also exist, they make good current limiting devices)

  2. Transducers/Sensors: Sample DeviceThermistor • Accuracy: Thermistors are one of the most accurate types of temperature sensors. Typical accuracy of ±0.2°C. • Range: Thermistors are fairly limited in their temperature range, working only over a nominal range of 0°C to 100°C . • Stability: Thermistors are chemically stable and not significantly affected by aging.

  3. Transducers/Sensors: Sample DeviceThermistor

  4. Transducers/Sensors: Sample DeviceThermistor • Linearity: Thermistors are highly non-linear, following a law called the Steinhart-Hart equation A, B and C are constants found experimentally by measuring R at three different temps and substituting back in the equation Graphs or tables of RvsT are usually used

  5. Transducers/Sensors: Sample DeviceThermistor Typical Thermistors

  6. Transducers/Sensors: Sample DeviceThermistor • Using a Thermistor to sense/measure temperature 1: If the thermistor is part of a potential divider then the output signal will vary with temperature. This simple circuit lacks precision, it’s often used in a set-point switch

  7. Transducers/Sensors: Sample DeviceThermistor Using a Thermistor to sense/measure temperature 2: The thermistor is one of the resistors in a Wheatstone Bridge – say R4. The output voltage is now related to temperature and will vary as the temperature varies. Calibration will enable temperature to be measured.

More Related