1 / 19

PUCT Staff Workshop: ERCOT Study Scope and Procedures Review

This workshop aims to review the study scope and procedures proposed by ERCOT regarding risk criteria, screening studies, detailed studies, and modeling requirements in power system analysis.

Download Presentation

PUCT Staff Workshop: ERCOT Study Scope and Procedures Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Project No. 43506PUCT Staff Workshop11/19/14 Julia Harvey Kristi Denney Kevin Mathis Jasmin Thevaril

  2. Agenda • Introductions • Workshop goals • Discussion/Q&A by topic • ERCOT proposed approach • Expert perspectives • Stakeholder comments and questions Discussion Topics • Study scope • Risk criteria based on topology review • Screening studies • Detailed studies • Study Process • Modeling requirements • Communication & review process

  3. PUCT Staff Workshop Goals • Facilitate ERCOT/stakeholder review of study scope and procedures • Solicit expert perspectives • Gather enough information to report back to the Commissioners with recommendations • Address ERCOT/stakeholder goals

  4. ERCOT’s Proposed Risk Criteria Based on Outages • How should units be ruled in or out for more detailed study? • Outages based probabilistic analysis? (ERCOT topology test) • Counting outages: double vs. single circuit • If units are ruled in, what is the next step?

  5. ERCOT’s Proposed Approach to Screening Studies

  6. Screening Studies: IGE

  7. Screening Studies: Torque Amplification

  8. Screening Studies: SSTI

  9. ERCOT’s Proposed Approach to Detailed Studies

  10. Detailed Studies: Sensitivities for Damping Analysis • Switched shunt status • Series capacitor staging/bypass status • Series compensation levels (as appropriate) • For existing series capacitors, consider minor variations (-10%) due to the possibility of capacitor cans failing • For new series capacitors consider adjusting the series compensation levels as mitigation for SSO observed within the ERCOT specified risk criteria • System load levels and load models including plant station loads • Modeling and status of nearby generators • Split bus configurations, relaying schemes, or other area-specific concerns as identified by the affected TSP(s) and ERCOT • Sensitivity of generation dispatch level and number of units online • Whether units within the plant or nearby plants have similar modes • Effect combined cycle configurations • Impact of Power System Stabilizer (PSS)

  11. Sensitivities for IRRs • What parameters should be assessed in IRRs frequency domain analysis? ERCOT suggestions: • Varying dispatch levels, (10% and 100%) • Varying number of units or collector feeders online (including effect of various collector feeder configurations) • Interaction with neighboring units.

  12. Sensitivities for TA Analysis • Should torque amplification in turbine-generators be the subject of detailed studies? • If so, what parameters should be assessed? • ERCOT suggestions: • Simulations of critical faults and reclosing events, both failed and successful if identified by the affected TSP(s) and ERCOT. • Sensitivities of fault inception time and fault location or worst-case condition • How should the age of the generator be considered?

  13. Modeling Requirements: TSPs • What data is required from the TSP? • For TA studies, TSP must provide information regarding series capacitor protection and metal oxide varistor (MOV) circuits. • Station one-lines where not standard breaker-and-a-half, or alternatively, information of split bus configurations, stuck breaker contingencies, and bus faults • Dynamic load models of nearby load centers

  14. Modeling Requirements: Conventional Units • What data is required from turbine-generators? • Protection modeling • Mechanical Data • Number of Masses • Inertia constant for each mass • Associated self-damping of each mass • Spring constant associated with shaft connecting various masses • Mutual damping between masses • Generator electrical and dynamic data • Exciter model and data • Power System Stabilizer (PSS) model and data • Plant load data and load ratios (PQ, motor, etc) • If necessary, shaft fatigue curve

  15. Modeling Requirements: IRRs • What data is required from IRRs? • Number and type of turbines or inverters and associated • Collector system model and one-line • Supplemental reactive equipment, including switchable shunts, STATCOMs, and SVCs • EMTP models of turbines / inverters • EMTP models of supplemental dynamic devices unless if it can be verified to not exacerbate subsynchronous interaction

  16. Study Process Issues • Data sharing: can stakeholders supply necessary data to perform detailed studies? • If not, what is the impact of using conservative assumptions? • Do ongoing and completed studies need to be updated? • Should studies recommend specific protection/mitigation solutions?

  17. NPRR562 • How much detail should be added? • Study parameters • Study process guidelines • Necessity of the “action table”

  18. Related Questions • Operational issues • Necessity of series capacitors • To support exports: West Texas study • Reliability purposes

  19. Next Steps? • Report to the Commission • Early 2015 • NPRR562/Additional workshops?

More Related