1 / 20

Yield strength: the elongation of a mat'l b. the maximum stress a mat'l can stand without fracture c. a measure of the e

Yield strength: the elongation of a mat'l b. the maximum stress a mat'l can stand without fracture c. a measure of the elasticity of a mat'l d. the stress required to initiate plastic flow e. the stress required to initiate elastic flow. 2. A practical reason for deforming an alloy

sammy
Download Presentation

Yield strength: the elongation of a mat'l b. the maximum stress a mat'l can stand without fracture c. a measure of the e

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Yield strength: the elongation of a mat'l b. the maximum stress a mat'l can stand without fracture c. a measure of the elasticity of a mat'l d. the stress required to initiate plastic flow e. the stress required to initiate elastic flow

  2. 2. A practical reason for deforming an alloy to form a solid solution b. to soften it c. to strengthen it d. to anneal it e. to destroy dislocations

  3. 3. Hardness is usually defined as: the ability of a material to undergo plastic deformation before fracture b. the amount of energy absorbed by a material as it fractures c. the resistance of a material to deformation by indentation d. the capacity of a material to absorb energy when elastically deformed e. none of the above

  4. 4. Ageing is: the quenching of an aluminum alloy b. the process in which all of a second phase is dissolved in an aluminum alloy, forming a solid solution c. the process in which dislocations are slowed in their movement through interaction with precipitate particles d. the process in which fine particles of a second phase form e. a process which does not involve diffusion

  5. 5. According to the Aluminum Association numbering system for aluminum alloys, 2024 indicates: an Al-C alloy b. an Al-C alloy with 0.24 % C c. an Al-C alloy with 2.4 % C d. an Al-Cu alloy with 2.4 % Cu e. an Al-Cu alloy

  6. 6. A dislocation is: a defect which involves interstitial atoms on a slip plane b. a grain boundary which can slip c. responsible for the inability of steels to be plastically deformed d. a pileup against a grain boundary e. a wonderful structural defect that is present in essentially all metals and alloys

  7. 7. What does the T4 in 2024-T4 mean? an aluminum alloy with 0.4% carbon b. the alloy has been heated to 492 C and held there for 20 minutes c. the alloy has been quenched at 492 C and aged at room temp d. the alloy is iron-based with 0.4% carbon e. all dislocations must be removed by a room temperature heat treatment

  8. 8. Dislocations: move along a slip plane b. move in a direction perpendicular to a slip plane c. cannot be destroyed d. move in response to a tensile force in the direction of the slip plane e. can move in any direction in a slip plane

  9. 9. Aluminum alloys cannot be strengthened by: cold working b. precipitation hardening c. solution hardening d. quenching

  10. 10. Steels cannot be strengthened by: quenching b. adding more carbon c. adding alloying elements d. annealing e. cold working

  11. 11. Which is false? no dislocations = extremely strong material b. no dislocations = extremely ductile material c. many dislocations = strong material d. the presence of dislocations weakens a material

  12. 12. Impede dislocation motion: precipitate particles b. other dislocations c. grain boundaries d. solute atoms e. all of the above

  13. 13. An aluminum-4% copper alloy is heated to 500° C and quenched. Upon quenching: the temperature increases b. precipitate particles form c. a solid solution is formed d. the alloy is strengthened e. nothing (other than the mat'l cools and probably shrinks)

  14. 14. Rank 1-2-3-4 for possible strength (1 = highest) Steels Al alloys polymers ceramic mat'ls 3 2 1 4 b. 1 2 4 3 c. 2 3 4 1 d. 3 2 4 1 e. 1 3 2 4

  15. 15. A slip system consists of: a slip plane and a shear stress b. a slip plane and an edge dislocation c. a slip plane and a slip direction d. an edge dislocation and a shear stress e. an edge dislocation and a slip direction

  16. 16. The higher the percent carbon in a steel, the higher the brittle to ductile transition temperature b. the lower the brittle to ductile transition temperature c. the amount of carbon present does not effect the transition temperature d. more dislocations form upon heating e. fewer dislocations form upon heating

  17. 17. Which of the following is not a method for strengthening metals and alloys: cold working b. precipitation hardening c. solution hardening d. work hardening e. none of the above

  18. 18. The ease of dislocation motion depends upon: the presence of alloy elements in a material b. the presence of precipitates in an alloy c. the number of available slip systems d. all of the above

  19. 19. A heat treated Al alloy contains, at room temperature, an Al-Mg-Fe-Si solid solution, an Mg-Si precipitate, and an Al-Fe-Si precipitate. How many states and phases? 1 state, 1 phase b. 3 states, 1 phase c. 1 state, 4 phases d. 1 state, 3 phases e. 3 states, 4 phases

  20. 20. Another name for precipitation hardening: solution hardening b. age hardening c. work hardening d. austenitization e. annealing

More Related