1 / 20

Readying Data Networks for Converged Services

Readying Data Networks for Converged Services. Presented by: Jaye Armstrong-CCIE Director of Data Services. Readying Data Networks for Converged Services. Introduction Assessing and Qualities that effect Converged Networks Network Tools that effect Converged Networks Example Network.

rue
Download Presentation

Readying Data Networks for Converged Services

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Readying Data Networks for Converged Services Presented by: Jaye Armstrong-CCIE Director of Data Services

  2. Readying Data Networks for Converged Services • Introduction • Assessing and Qualities that effect Converged Networks • Network Tools that effect Converged Networks • Example Network

  3. What is a Converged Network?Communications • A converged network is a network that handles two or more different applications such as Data, Voice, and Video.

  4. Convergence Requirements • Any Successful Converged Solution starts with a • Complete assessment of the current network for: • Speed and Duplex Settings of Devices • Current network applications and their priorities • Current Network devices and software revisions • Future Projects

  5. Major Areas of Influence to Successful Deployment • Every network should be mapped in detail and thoroughly assessed for the following factors: • Duplex Settings • Bandwidth • Delay • Jitter • Loss

  6. Duplex Settings • Duplex is the ability to converse in both directions at the same time. • All Telephone and Server equipment should be manually set to Full-duplex on the device and switch. • All switch ports that will have different devices plugged in should be left to auto negotiate.

  7. Bandwidth • Bandwidth is the number of bits per second that can be transmitted across a medium. • Point to Point links use the physical medium speed or clock rate of the interface to determine bandwidth. • Frame-Relay links should use the CIR (Committed Information Rate) of the link.

  8. Delay • Delay is experienced on every network from the time the packet Is first sent and when it arrives at it’s destination. • Serialization Delay • Propagation Delay • Forwarding/processing delay • Queuing Delay • Shaping Delay • Network Delay • Codec Delay • Compression Delay

  9. Jitter • Jitter is the variation in the arrival rate of packets that were sent in a uniform manner. • Jitter is unavoidable but we can keep it to a point where it does not impact the quality of the service. • Jitter is in a direct relationship with Bandwidth and Delay

  10. Loss • Packet loss can happen for many reasons but is not a concern in most modern networks.

  11. Industry Standards for Delay, Loss, and Jitter • Packet Loss - 1% or less can yield toll quality - 3% or less can provide Business communication quality - greater than 3% may be acceptable for voice • Jitter - 20ms or less for Toll Quality • Delay - 80ms or less for Toll Quality • - 180ms or less for Business Quality

  12. Network Tools that effect Converged Networks • QoS – Quality of Service Tools • COS – Class of Service Marking • Queuing • Traffic Shaping • Fragmentation

  13. Classification and Marking Tools • COS – Class of Service is the marking and classifying of packets. • Class of Service marking does no good if the devices are not configured to handle the marked traffic. • True CoS uses the CoS field of an 802.1p/Q packet or the Layer 3 DSCP value in the packet. • Other means of marking traffic is through Port numbers, IP addresses, etc through configuring access lists to identify the traffic.

  14. Quality of Service Tools • QoS – Quality of Service refers to the network devices actually • Giving the tagged traffic different service levels. • QoS on Layer 2 - queuing • QoS on Layer 3 – queuing, traffic shaping, fragmentation

  15. Bandwidth Tools • Compression • Header Compression • Silence Suppression • Codec Selection • G729 – Most Compression loss in quality • G711 – No Compression Best Quality

  16. Example Network Topology

  17. Example Campus Site

  18. Example T1 Site

  19. Steps to Success • Planning • Make Sure all requirements are documented • Document Current Network • Review requirements • Assess Network Before and After Configuration • Use a good assessment tool that injects Voice Traffic • Add QoS to network one step at a time and test! • Test Every possible scenario before putting into production

  20. THANK YOU • For Further Questions: • Jaye Armstrong • Lantana Communications • Director of Data Services • 817-606-3317 • jarmstrong@lantanacom.com

More Related