1 / 46

Unit 1B – Capabilities & limitations of ICT

Unit 1B – Capabilities & limitations of ICT. Capabilities & limitation of ICT. ICT vs Manual methods of data processing Case Study – the school reporting system Your intermediate reports used to be done by hand, the system has now been computerised.

rowdy
Download Presentation

Unit 1B – Capabilities & limitations of ICT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Unit 1B – Capabilities & limitations of ICT

  2. Capabilities & limitation of ICT ICT vs Manual methods of data processing Case Study – the school reporting system Your intermediate reports used to be done by hand, the system has now been computerised. What benefits are there of having a computerised reporting system ?

  3. Capabilities & limitation of ICT ICT vs Manual methods of data processing Case Study – the school reporting system The old system was for subject teachers to transfer levels and effort grades from their mark books into a grid for pupils in each form. Image of markbook & grid sheets in here

  4. Capabilities & limitation of ICT ICT vs Manual methods of data processing Case Study – the school reporting system These levels and grades were then copied onto pupil report sheets by form teachers. Image of report sheets in here

  5. Capabilities & limitation of ICT ICT vs Manual methods of data processing Case Study – the school reporting system The grids and duplicates of the reports were then stored in a room. Image of bundles of reports in here

  6. Capabilities & limitation of ICT ICT vs Manual methods of data processing Case Study – the school reporting system The new, computerised system requires teachers to select the class they teach and then enter levels and effort grades into the class list. Image of class list page in here

  7. Capabilities & limitation of ICT ICT vs Manual methods of data processing Case Study – the school reporting system The data for each pupil is then processed and printed. Image of final printout in here

  8. Capabilities & limitation of ICT ICT vs Manual methods of data processing Case Study – the school reporting system Consider the two systems and using a table (full page of A4 with explanations) make a comparison of the two systems :

  9. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Consider the effects of : Hardware Software Suitability of operating system Communication GIGO

  10. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Hardware : Does the existing hardware meet minimum specifications for the software? Ideally it should meet the recommended specification. System RequirementsMinimum System Requirements:Intel® Pentium® or AMD® Athlon® 2 GHz512 MB RAMWindows® XP or Windows 2000 (XP recommended)USB 2.0 portDirect X® compatible graphics card (ATI® Radeon® or NVIDIA® GeForce" or higher recommended)Direct X compatible sound card650 MB hard disk spaceDVD burner, mouse, CD-ROM driveHardware specifications:External Hi-Speed USB 2.0 video capture deviceComposite video input (RCA connector)S-Video input (mini-DIN connector)Stereo audio input (2 x RCA connectors)

  11. Capabilities & limitation of ICT • Factors affecting the efficiency of data processing systems • Software : (object linking and embedding) • OLE allows information to be shared between different programs • For example, a spreadsheet created in Excel can be included in a Word document either by embedding it in the document, or by creating a link from the document. • An embedded object has no connection with its original source file. • A linked object ensures that the information displayed in the document will always be displayed – via the link – directly from the source file.

  12. Capabilities & limitation of ICT • Factors affecting the efficiency of data processing systems • Software : • Linked object • original information remains in the source file • destination file displays a representation of the linked information but stores only the location of the original data • linked information is updated automatically if you change the original data in the source file • Use if file size is a consideration • Embedded object • becomes part of destination file. • because an embedded object has no links to the source file, the object is not updated if you change the original data

  13. Capabilities & limitation of ICT • Factors affecting the efficiency of data processing systems • Software : • Consider the data processing efficiency of a piece of software in terms of : • Ease of data entry • Speed of processing • Compatibility • Memory requirements • Unnecessary features

  14. Capabilities & limitation of ICT • Factors affecting the efficiency of data processing systems • Suitability of operating system • Operating systems available are : • Windows – most common PC op sys • OSX (Panther) – most common apple mac op sys • Unix/Linux – GUI similar to windows but open source • MSDOS – command line driven op sys

  15. Capabilities & limitation of ICT • Factors affecting the efficiency of data processing systems • Suitability of operating system • Operating systems deal with • Memory management. • Resource allocation and scheduling • Backing store management • Interrupt handling • Allowing a user to communicate with the computer • Controlling peripheral devices If the operating system does not run efficiently then the application software will not run efficiently.

  16. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Communication If an application is being used on a network machine and the processing is taking place over the network (grid processing) then the efficiency & capability of the network becomes a factor when considering efficiency of processing. GIGO – garbage in = garbage out If the data entry method is inefficient or input data is not valid then the efficiency of processing is affected – errors will occur during the data processing stage.

  17. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Other factors affecting efficiency Change in circumstance during software development Software takes a long time to develop, if during this time another product comes onto the market or a new system is released (win 98 vs win XP) then the development of the software is affected. Speed of implementation Once an organisation has acquired software it has to implement it, this involves installing & training. This has a direct affect on processing efficiency

  18. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Other factors affecting efficiency Compatibility When windows XP was released, users who upgraded from win 98 suddenly found that their scanners / printers / applications would not work – oops. Insufficient testing Software development is a very competitive field with pressure to release products ahead of the field. As a result, software is sometimes not fully tested.

  19. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Other factors affecting efficiency Poor communication with user The user interface may not be very friendly (how ?) Validation rules may not have sensible error messages, informing the user of their mistake The instruction manual could be poor

  20. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Ability of user If the user is clueless then the efficiency of data entry / processing is affected. It has been postulated that if a monkey randomly hit keys on a PC for 10,000 years then at some point they would type the entire works of Shakespeare !

  21. Capabilities & limitation of ICT Factors affecting the efficiency of data processing systems Poor post implementation Post implementation is the procedures / actions that are carried out after the software has been installed. These could be : Training Monitoring Evaluation

  22. Capabilities & limitation of ICT • Factors affecting the efficiency of data processing systems • Maintenance procedures • Required for a number of reasons • Errors may appear in the software • Original requirements are modified • Hardware developments may make it desirable to change the software to take advantage • New legislation may be introduced

  23. Factors affecting the efficiency of data processing systems Types of maintenance • Perfective maintenancesystem can be made better in some way without changing its functionality. • Adaptive maintenancechanging needs in a company may mean systems need to be adapted – e.g. a single-user system may be adapted to a multi-user system. • Corrective maintenanceinvolves correction of previously undetected errors. e.g. the millennium bug. Many major programs are released with ‘bugs’ that require maintenance releases – ‘patches’ or ‘service packs’ to fix them (most of the Microsoft products)

  24. Factors affecting the efficiency of data processing systems Types of maintenance (cont) • Process triggered by: • user or management requests • Further development by manufacturer • Cost and impact on system are assessed for feasibility • New release has to be programmed and tested • Software packages generally have release numbers • Minor releases are indicated by a change in number suffix e.g. 3.0 to 3.1 with Windows • Major releases are often indicated by a change like 4.0 to 5.0 or by a change in name

  25. Factors affecting the efficiency of data processing systems Types of maintenance (cont) • Most software developers would prefer to be working on exciting new projects • Maintenance is very expensive • Cost-effectiveness depends upon • A clearly-defined and well-documented original system • Suitably qualified and informed analysts and programmers • A clear and uncomplicated dialogue path between user and developer • A transparent structure that allows analysts and programmers to assess fully the impact of any changes • Limiting the amount of change at any one time

  26. Factors affecting the efficiency of data processing systems Cost Cost can be considered in terms of money, time and human resources. If a system has a high financial cost and takes a long time to be implemented or process data then it would be considered inefficient.

  27. Factors affecting the efficiency of data processing systems Hardware (refer previous notes) The hardware that is needed to run software efficiently is a factor to be considered : Is the hardware powerful enough to run the software ? Is the hardware reliable enough ? Is new hardware needed to run the software ? Is the hardware compatible (mac vs PC)

  28. Factors affecting the efficiency of data processing systems Support • When you purchase software you often receive a form of support. • This may be in the form of : • Help files • Online (internet) help • Technical advice over the phone • Engineer callouts • Updates

  29. Nature & Capabilities of Software • What is software? • Types of software • Generic software • Drivers, protocols and standards for interfacing with peripherals and storage devices • Object linking and embedding • Functionality of internet software • Compatibility and portability • Features of software & evaluation/comparison • Upgrading - technical and human implications • Reliability - how do we make software reliable?

  30. Nature & Capabilities of Software What is software? • Hardware is the physical components that make up a computer system. • Software is the programs and data that make the hardware do something useful. • Software is NOT the CD or floppy disc that the program comes on - usually you are just buying the licence to use the software, and not the software itself.

  31. Nature & Capabilities of Software Firmware • You may also come across the term Firmware - this is software that is stored in hardware (i.e. on a chip) and is usually found in embedded systems. • Not all computers are multi-purpose desktop or laptop PCs, mainframe or mini-computers, so are designed for a specific purpose and are built into machinery - these are called embedded systems. • Embedded systems are mostly used for control, e.g. in washing machines.

  32. Nature & Capabilities of Software Types of Software There are three main categories of software: • Operating systems • Utility programs • Applications • Specific purpose - e.g. Encarta, POS, etc. • Generic - e.g. spreadsheets, databases, etc. • Off the shelf - i.e. a product such as Sage Accounts • Bespoke - i.e. custom-made for the user Applications come in different types :

  33. Nature & Capabilities of Software Operating Systems • Control and manage the computer’s resources • memory management • resource allocation • storage • communication • interrupt handling • Examples include Windows (NT, 2000 and XP only, not versions up to 98), Unix, Linux, CPM, Mac-OS. • Heathcote says that they are installed on the hard disc, but this is not always the case, e.g. RISC-OS, PDAs, embedded systems and early home computers such as Spectrums and VIC-20s!

  34. Kernel Shell Nature & Capabilities of Software Operating Systems • The kernel is hardware specific and controls primary and secondary storage, input and output. • The shellprovides the user interface - this could be a command line or a Graphical User Interface. • It is possible that an operating system, e.g. Windows NT or Linux, could run on several platforms (e.g. Intel, Power PC, DEC Alpha) by having the same shell with different kernels

  35. Nature & Capabilities of Software Memory Management • System resources and hardware often require memory which must be allocated by the OS • Most modern operating systems are capable of multi-tasking (running several programs at once) - each program will require its own area of memory to store data. • Some types of OS can use multiple processors, so they must also decide where a process takes places, as well as which memory it will use!

  36. Nature & Capabilities of Software Memory Management Primary storage (e.g. RAM): • Non-volatile, usually magnetic media - stored without power • Slower - access time of around 8ms • Cheaper, e.g. 40Gb for £35 • Volatile - i.e. contents are lost without power • Fast - access time of around 7ns for PC RAM • Relatively expensive - 1Gb DDR RAM costs £140 Secondary storage (e.g. hard disc):

  37. Nature & Capabilities of Software Virtual Memory • Sometimes the operating system can use secondary storage to supplement primary storage in a way that is transparent to the application - this is called virtual memory • RAM overflows onto the disc - e.g. in the Windows paging/ swap-file

  38. Sector Nature & Capabilities of Software Disc Storage Constant angular velocity Constant linear velocity • CLV discs (e.g. Compact Discs) slow down as sectors nearer the edge are read - the sectors are the same physical length so that capacity is increased

  39. A A A B A B B B B B Nature & Capabilities of Software File Allocation and Fragmentation • File A is written • File B is written • File A is edited • Disc is fragmented • The disc is now defragmented - the sectors are contiguous and so quicker to read • Location of file is stored in the File Allocation Table (FAT) A

  40. Keystrokes Mouse movements or clicks Nature & Capabilities of Software User Interface GUI WIMP Menu Command • Manages multi-tasking – e.g. each application in a separate window • Allocates events to the appropriate application: • Mouse movement • Mouse click/double-click • Key presses • Timers Shell

  41. Copy Paste Nature & Capabilities of Software User Interface • Provides the ability to transfer information between applications – e.g. the clipboard in Windows Clipboard Application A Application B • Provides a consistent appearance to applications, e.g. menus, help, printing and error messages

  42. Nature & Capabilities of Software Peripherals • Peripherals can be connected to a computer either internally - e.g. video or sound cards - or externally, through USB, serial or parallel ports. • Internal devices are serviced through interrupts - the OS polls each device in turn to see whether it requires any processing time. • The operating system communicates with the device through a driver. • A driver is a piece of software that translates the user’s instructions - e.g. that they want a particular piece of text to be bold - into the device-specific control codes that the particular hardware uses.

  43. Nature & Capabilities of Software Utility Programs • A utility is a small program, usually with a technical function - they often come with an operating system. • Examples of utilities are: • Virus checkers • Windows Explorer/File Manager/Xtree • Printer Manager • Scandisk & Defrag • Winzip (or other compression software) • Norton Utilities/PC Tools • Compilers and interpreters • Performance monitoring • Backup and restore

  44. Nature & Capabilities of Software Applications • Written for a specific purpose - inflexible • Such systems may be bespoke or off-the-shelf • Bespoke systems are those written specifically for a particular customer, usually in a language such as C++, Visual BASIC or Java, e.g. • Point of Sale (POS) systems • Insurance quotation systems • Management Information Systems (MIS) • Off-the-shelf software is the boxed products you might see in PC World: • Sage Accounting • AutoRoute

  45. Nature & Capabilities of Software Bespoke Software • More likely to be bug-ridden • Tied into one suppliers, e.g. for: • documentation (no books!) • training • support • Portability of data is less likely • Much more expensive • Purpose-designed for task - it does exactly what you want (or what you asked for, anyway!) • Purpose-designed for hardware • Extra features can be integrated more easily

  46. Nature & Capabilities of Software General Purpose/Generic Software • Some software wasn’t designed for a specific purpose - they are known as generic or content-free applications • Examples of generic software include: • word processors and DTP applications • database management systems • spreadsheets • Integrated packages contain several of these functions in one application - e.g. Microsoft Works or Lotus Symphony • Software suites contain these functions in separate applications, e.g. Microsoft Office or Lotus SmartSuite

More Related