1 / 22

Capacity Development for CDM The UNEP CDM Sustainable Development Impacts Guidebook Tunis, 27-29 August 2004

Capacity Development for CDM The UNEP CDM Sustainable Development Impacts Guidebook Tunis, 27-29 August 2004 Samir Amous, APEX, Tunisia Regional Centre for North Africa and Middle-East.  Published by URC in June 2004 Authors: 4 experts from URC Almost 90 pages. 8 Chapters.

rowa
Download Presentation

Capacity Development for CDM The UNEP CDM Sustainable Development Impacts Guidebook Tunis, 27-29 August 2004

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Capacity Development for CDM The UNEP CDM Sustainable Development Impacts Guidebook Tunis, 27-29 August 2004 Samir Amous, APEX, TunisiaRegional Centre for North Africa and Middle-East Capacity Development for CDM - RW4 / 27-29 August 2004

  2.  Published by URC in June 2004 • Authors: 4 experts from URC • Almost 90 pages Capacity Development for CDM - RW4 / 27-29 August 2004

  3. 8 Chapters • Introduction and outline • Article 12 KP addressing SD • Steps for SD assessments in CDM projects • SD in relation to CDM • Selecting SD Criteria for CDM projects • Selecting SD indicators for CDM projects Capacity Development for CDM - RW4 / 27-29 August 2004

  4. 8 Chapters • Decision-making tools for SD evaluation • CDM and SD: case studies Annex: the South-South-North criteria and indicators Appraisal matrices Capacity Development for CDM - RW4 / 27-29 August 2004

  5. 1. Introduction and outline • SD: a main driver for Non-Annex I partie participation to the CDM • Stress on the difficulties to assess SD contribution of CDM projects • The guidebook is meant to give a general introduction to policy makers and project developers how CDM projects can be developed in a way where they assist in achievement SD goals Capacity Development for CDM - RW4 / 27-29 August 2004

  6. 2. Article 12 of KP and the link to SD • Explicit purpose of the CDM contribute to SD of host countries • The SD perspectives of the CDM – examples of areas where CDM can contribute to SD: • Increased Energy Efficiency • Sustainable energy production • Transfer of Technologies and Financial Resources • Local env. benefits • Poverty alleviation • Private and public sectgor capacity development Capacity Development for CDM - RW4 / 27-29 August 2004

  7. 3. Six major steps of a SD assessment • Overview of Policy priorities reflecting the development context • Selecting SD Criteria based on national SD priorities • Initial screening of potential CDM projects • Outline of procedures for assessing SD impacts • General decision-making procedures • Evaluation performance of implemented CDM projects Capacity Development for CDM - RW4 / 27-29 August 2004

  8. 3. Six major steps of a SD assessment 4. Outline of procedures for assessing SD impacts: • Identification and selection of SD indicators • Designate an approach for assessing the indicators • Format of Reporting: measurment standards and aggregation rules 5. General decision-making procedures: stakeholder dialogue, detailed SD assessment 6. Evaluation performance of implemented CDM projects Capacity Development for CDM - RW4 / 27-29 August 2004

  9. 4. SD in relation to CDM • CDM and the SD perspective: Environment is the core issue, but also Development priorities of host countries • Some examples of SD criteria • Social (improve quality of life, alleviate poverty, improve equity • Economic: financial returns to local entities, positive impacts on balance of payments, transfer of nezw technologies • Environment: reduce GHG, conserve local resources, reduce pressure on local env., etc. Capacity Development for CDM - RW4 / 27-29 August 2004

  10. 4. SD in relation to CDM • SD criteria for CDM are largely overlapping with national Dev. CriteriaLarge potential synergies • Operationalizing SD at the project level: if a project contribute to SD at its level, it will have a positive impact on SD at national level (although marginal): • SD criteria should be meaningful from a project level perspectiveappropriate indicators • The overall SD impacts should be positive • The negative/irreversible side-effects should be taken into account Capacity Development for CDM - RW4 / 27-29 August 2004

  11. 4. SD in relation to CDM • Aggregate SD impacts: how to interpret the resultsnegative VS positive impacts • How to address the trade-offs • Compensation of the negative impacts • In absence of reliable calculationonly limited impacts are acceptable (above safe minimum level) Capacity Development for CDM - RW4 / 27-29 August 2004

  12. 5. Select SD criteria • Link CDM projects to national SD criteria: • Screening the Millenium Development Goals: formalized targets: • E.g. Halve the proportion of people whose income is less than US$ 1 between 1990-2015goals and indicators • E.g. achieve significant improvement in the lives of at least 100 millions slum dwellers in Indiacommission 14 GW hydro • In general: linkage between MDG and Energymeet national power demandhow can CDM support rural electrification Capacity Development for CDM - RW4 / 27-29 August 2004

  13. Desirable properties of SD indicators • Complete: all dimensions are reflected through the set of indicators • Operational • Decomposable • Non redundant • Minimal Capacity Development for CDM - RW4 / 27-29 August 2004

  14. Some examples of SD indicators • Employment: nbr man-years generated • Growth : Net Surplus achieved • Exhaustible resources: physical units Capacity Development for CDM - RW4 / 27-29 August 2004

  15. Some examples of applying SD • Hypothetical illustration (e.g. biogas in rural area) • Only qualitative assessment Capacity Development for CDM - RW4 / 27-29 August 2004

  16. Conclusion regarding indicators • Indicators are necessary for any assessment procedure • There are many qualitative and quantitative indicators available in the litterature that we need to define for assessing CDM projects Capacity Development for CDM - RW4 / 27-29 August 2004

  17. 7. Decision making tools for SD evaluation • A number of Tools are available: Cost-benefit analysis, Multicriteria analysis, Ranking methodologies • Can be carried out in a simple or more complex way • Key advantage and disadvantages of each approach Capacity Development for CDM - RW4 / 27-29 August 2004

  18. 7. Decision making tools for SD evaluation • Cost-effectiveness analysis: cost of the mitigation against potential reductions • Simple, but • Difficulties in predicting the future • Care is needed when defining the relevant cost: financial VS economic costs, etc. • Cost-benefit analysis: all costs of the project (either negative or positive): • Time cost, lack of transparencymore relevant for CDM programmes • Readily appliable for larger CDM projects Capacity Development for CDM - RW4 / 27-29 August 2004

  19. 7. Decision making tools for SD evaluation • Multicriteria analysis: weighting the different criteria, combine scores and obtain an overall value, examine the result, conduct sensitivity analysis: • Widely used • Attractive approach • Ranking methodologies: simple checklist approach (identification of indicators, notations: negative, neutral, positive, weights), best practice (project against the baseline, -1 to +1), Analytical Hierarchy Processclose to multicriteria Analysisscoring and weighting tool for non quantifiable attributes Capacity Development for CDM - RW4 / 27-29 August 2004

  20. 8. Case studies • South-South-North initiative: the Checklist approach (details in annex A). Indicators: • -2 to +2: • -2: Major negative impacts (ecological, social, economic, etc. • -1: very minor negative impacts • Applications: • South Africa (biomass) • Brazil (Biodiesel) • Too many criteria, high level of subjectivity associated with using scores to qualitatives cirteria Capacity Development for CDM - RW4 / 27-29 August 2004

  21. 8. Case studies • Multicriteria analysis: • Egypt (better guidance to apply indicators, but varying number of indicators in each type of criteria, a sensitivity analysis is required) • Cost-effectiveness Approach Applications (dependent of the discount rate, carbon benefits are rarely crucial to justify the project, etc.) : • Egypt • Philippines • Uganda Capacity Development for CDM - RW4 / 27-29 August 2004

  22. END OF THE PRESENTATION Thanks Capacity Development for CDM - RW4 / 27-29 August 2004

More Related