1 / 12

Rules 5 & 6

Rules 5 & 6. Violations and Fouls. PLAY ON.

Download Presentation

Rules 5 & 6

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Rules 5 & 6 Violations and Fouls

  2. PLAY ON If a player commits a loose-ball technical foul or crease violation and the offended player’s team may be disadvantaged by the immediate suspension of play, the official shall visually and verbally signal “Play-on!” (Mechanic 16). The whistle shall be withheld until the play ends or advantage is gained or lost.

  3. Fouls with possession by the team that was fouled: • Throw the flag straight up into the air (10 to 15 feet). • Yell “Flag down!” • Allow the offensive team (with possession) to complete their play. (Slow whistle mechanic if necessary) • Sound your whistle to stop play when the rules require you to. (See “Rule 7”) • Make certain all residual action among the players has ceased. (continued next page)

  4. Fouls with possession by the team that was fouled: • Turn toward the table and announce the following information: - The uniform color of the offending player. - The number of offending player (and signal the number with your hands). - The foul the player committed (give signal). - The time to be served (30 SEC., 1 to 3 minutes). - If the penalty is non-releasable. - Who will have possession and where the ball will restart (e.g., “Blue ball, free clear”; “Blue ball, outside the box”). Technical Foul Direction of Play

  5. The Crosse: Minimum of 6.5” at the widest part of the head. Overall length: 40” to 42” or 52” to 72” (4 long poles permitted on the field at one time)

  6. Illegal Stick Illegal Pocket Locked Illegal Crosse

  7. Mechanic 13: Equipment Check Procedure As previously mentioned, equipment checks are to be done during dead ball situations, such as: • During a team time-out. • After a goal. • Before a face-off. • Between periods. These checks should be done so they have a minimal impact on the flow of the game. Different areas have different policies on equipment checks, so be sure to check with your trainer to find out the local procedures. In particular, be certain to find out whether you are expected to conduct inspections in local youth lacrosse contests. One equipment-check plan that works well is to do two checks per team in the first half after goals, then do one check per team in the second half at some time other than after a goal.

  8. Technical FoulsPersonal Fouls Crease violations Cross check Holding Slashing Illegal offensive screening Illegal body check Illegal procedure Illegal field (NCAA only) Conduct foul Illegal goals Interference Illegal crosse Offside Illegal equipment Pushing Tripping Stalling Unnecessary roughness Warding off Unsportsmanlike conduct Withholding ball from play Expulsion (fighting, tobacco, flagrant misconduct)

  9. Personal Fouls Cross Check Tripping Illegal Check Unnecessary Roughness Slash Unsportsmanlike Conduct

  10. Ejection Penalties Illegal Stick Locked Illegal Gloves Illegal Pocket Unsportsmanlike Conduct Non-releasable Personal Fouls

  11. Simultaneous fouls Simultaneous fouls are non-releasable for the shorter penalty time.

  12. What does each sequence of signals tell you? A B C

More Related