Motorbikes Component Manufacturer- Advanced Composites Have Revolutionized The Market

1. Motorbikes Component Manufacturer: Advanced Composites Have Revolutionized The Market Advanced composites have been significantly contributing to the automobile industry. Advanced composites are quite different from the traditional materials like aluminum and steel used in the manufacturing of motorbike components. Two or more materials are used to manufacture advanced materials. The primary advantage of advanced composites is that a motorbikes component manufacturer can customize the components used in the motorcycles to any extent. Main phases of advanced composites The advanced composites used in the manufacturing of diverse components in the automotive industry have two primary phases: 1.Reinforcing phase Carbon fibers, glass fibers, aramid fibers, etc. are used as the base components that create the reinforcing phase of an advanced composite. The reinforcing phase provides the necessary strength rigidity, and flexibility to the composite materials. A motorbikes component manufacturer such as Rockman AC chooses a reinforcing material depending on the specific applications of the components. Manufacturing internal and external components of a motorcycle such as wheels, exhaust components, font fenders, chain covers, and tank covers need carbon fiber as the reinforcing material while many external components such as Heat shields, Airbox covers, Instrument panel housings, and Chain guards need glass fiber as the reinforcing material. 2.Matrix phase The matrix phase holds the reinforcing phase tightly and surrounds it homogeneously. The purpose of the matrix phase is to provide support and transfer the load evenly to the reinforcing phase. Normally, a motorbike component manufacturer uses advanced composites with polymer resin as the matrix phase. However, in some cases, ceramic matrix or metal matrix is also used. The combination of these two phases is formulated keeping in mind the specific uses of the advanced composites. Carbon Fiber Reinforced Polymers (CFRP), Glass Fiber Reinforced Polymers (GFRP), and Aramid Fiber Reinforced Polymers (AFRP) are some of the most used advanced composites available today. Rockman Advanced Composites is an AS9100D-

2. certified Indo-British enterprise with more than five decades of advanced composites design and manufacturing expertise. This renowned motorbikes component manufacturer is familiar with fibers, resins, and sandwich constructions. Advantages of advanced composites What are the specialties of advanced composites that made it so useful and popular? Let’s find the key advantages of advanced composites: 1.The best weight-to-strength ratio Among all materials used in the manufacturing of motorbike components, advanced composites have the best weight-to-strength ratio. This means it can withstand the high tensile condition without any deformation. Steel has good strength but relatively high density that results moderate strength-to- weight ratio. Aluminum has higher strength and lower density than steel which results in a much better strength-to-weight ratio than aluminum. Advanced composites have excellent strength and significantly lower density making them the best metal with the best strength-to-weight ratio. 2.The corrosion resistance capacity Corrosion resistance is a crucial concern for every motorcycle manufacturer. In fact, it is one of the primary aspects of choosing a metal in the engineering and manufacturing industry as a whole. Advanced composites like Carbon Fiber Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) have high corrosion resistance capacity. Steel is good at corrosion resistance but it often needs further coating to be effectively corrosion-resistant in adverse weather conditions. Aluminum is naturally corrosion-resistant due to the formation of an oxide layer automatically. It can be made more corrosion-resistant by anodizing or extra coating. Advanced polymers are naturally corrosion resistant and their corrosion resistance capacity is quite high. It is a well-suited material where corrosion resistance is a major concern. 3.Lightweight Advanced composites are lightweight naturally. This makes the advanced composite materials suitable for modern-day motorbikes that are meant to be lightweight, compact, and fuel-efficient. There are dozens of other reasons why the most proficient motorbikes component manufacturer always prefer advanced components over other metals.