1 / 16

ECET 105 Enhance teaching-snaptutorial.com

For more classes visit<br>www.snaptutorial.com<br><br>I. OBJECTIVES<br>1.tTo test the operation of a 74LS74 D flip-flop and compare the operation with the predicted behavior<br>2.tTo test the operation of a 74LS112 J-K flip-flop and compare the operation with the predicted behavior<br>3.tTo measure propagation delays of a 74LS112 J-K flip-flop<br>4.tTo build and test an enhanced adder-subtractor<br>II. PARTS LIST<br>Equipment: <br>

robertleew11
Download Presentation

ECET 105 Enhance teaching-snaptutorial.com

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECET 105 Enhance teaching - snaptutorial.com

  2. ECET 105 Enhance teaching - snaptutorial.com • ECET 105 Week 7 iLab Add-Subtractor using Flip-Flops • For more classes visit • www.snaptutorial.com • I.         OBJECTIVES • To test the operation of a 74LS74 D flip-flop and compare the operation with the predicted behavior • To test the operation of a 74LS112 J-K flip-flop and compare the operation with the predicted behavior

  3. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 7 Homework For more classes visit www.snaptutorial.com 1. Sketch the Q output for the waveforms shown. Assume that Q starts LOW. 2. Sketch the Q output for the circuit shown below. Assume that Q starts LOW. 3. Sketch the Q output for the circuit shown below. Assume that Q starts LOW. 4. Sketch the Q output for the circuit shown below. Assume tha

  4. ECET 105 Enhance teaching - snaptutorial.com • ECET 105 Week 6 iLab Decoders and Multiplexers • For more classes visit • www.snaptutorial.com • Objectives: • To learn about the operation of a BCD-to-seven-segment decoder • To learn about the operation of a seven-segment display • To learn about the operation of multiplexers • To build and test a multiplexed display circuit using both

  5. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 6 Homework For more classes visit www.snaptutorial.com 1. When a HIGH is on the output of the decoding circuit below, what is the binary code appearing on the inputs? 2. Write the Boolean equations for each of the following codes if an active-LOW decoder output is required. The first decode is shown as an example.

  6. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 5 iLab Designing Adders and Subtractors For more classes visit www.snaptutorial.com Objectives:  The objectives are to reinforce the concepts of binary addition/subtraction while using the Quartus II Programmable Logic Tool as well as getting used to the program.  We were also supposed to build and test a simple adder/subtractor using the eSOC III Board.

  7. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 5 Homework For more classes visit www.snaptutorial.com 1. Determine the decimal value of each of the following unsigned binary numbers: 2. Determine the decimal value of each of the following signed binary numbers displayed in the 2’s complement form: 3. Determine the outputs (Cout, Sout) of a full-adder for each of the following inputs: 4. The circuit below is an attempt to build a half-adder. Will the

  8. ECET 105 Enhance teaching - snaptutorial.com • ECET 105 Week 4 iLab Logic Circuit Design, Simplification, Simulation, and Verification • For more classes visit • www.snaptutorial.com • Objectives: • To design a digital logic circuit using a truth table and sum-of-product (SOP) formulation. • To use the MultiSim program to simplify, simulate, and test the circuit operation. • To build and test the logic circuit to verify that the system

  9. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 4 Homework For more classes visit www.snaptutorial.com 1. Draw a logic circuit that performs the following Boolean expression: 2. Determine the Boolean expression for the circuit shown below. 3. The Boolean expression for an AND gate is . Does the expression also describe an AND gate? Prove your answer. 4. Write the Boolean expression for the logic circuit shown below.

  10. ECET 105 Enhance teaching - snaptutorial.com • ECET 105 Week 3 iLab Introduction to Digital Logic Gates • For more classes visit • www.snaptutorial.com • I.      OBJECTIVES • To understand basic logic functions (AND, OR, and NOT) and their complement used in Boolean algebra and digital logic design. • To test simple logic small-scale integration (SSI) integrated circuit (IC) devices. • II.     PARTS LIST • Equipment:

  11. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 3 Homework For more classes visit www.snaptutorial.com 1. Determine the output X for the 2-input AND gate with the input waveforms shown. 2. Determine the output X for the 2-input OR gate with the input waveforms shown. 3. Determine the output X for the 2-input Exclusive-OR gate with the input waveforms shown 4. Determine the output X for the 2-input NAND gate with the input waveforms shown.

  12. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 2 iLab Soldering Techniques and the Electronic Die Kit For more classes visit www.snaptutorial.com I.              OBJECTIVES 1. To learn the basics of soldering. 2. To produce mechanically and electrically sound solder joints. 3. To assemble the Electronic Die Kit. II.            PARTS LIST Equipment:

  13. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 2 Homework For more classes visit www.snaptutorial.com 1. What is the duty cycle for a square wave signal that is HIGH for 15 nsec and LOW for 30 nsec? 2. A pulse train is shown on the oscilloscope below. Determine the period of the pulse. 3. Determine the frequency for a pulse that occurs every 10 ms. 4. What is the base-10 value for the binary number 11012? 5. What are the respective weights of the 1s in Problem 4?

  14. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 1 iLab Introduction to Laboratory Test Equipment For more classes visit www.snaptutorial.com I.         OBJECTIVES 1.         To learn the function and basic operation of the instruments comprising a test bench 2.         To gain a basic understanding of how to use the power supply, DMM, oscilloscope, and function generator 3.         To take measurements using the power supply, DMM,

  15. ECET 105 Enhance teaching - snaptutorial.com ECET 105 Week 1 Homework For more classes visit www.snaptutorial.com 1. Does a typical computer have any analog outputs? If so, what are they? 2. List three advantages of digital signal representation as compared to their analog representation. 3. Convert 126 x 10+2 to scientific and engineering notations. 4. Make the following conversions:

  16. ECET 105 Enhance teaching - snaptutorial.com aa

More Related