1 / 18

INSPIRE Data Specifications Annex II & III Themes Collaboration with projects: LC & LU

INSPIRE Data Specifications Annex II & III Themes Collaboration with projects: LC & LU. Maria Vanda Nunes de Lima Edinburgh 28 June- 1 st July 2011. Outline. INSPIRE Directive Data Specifications- Interoperability of spatial data sets and services Methodology Where we are Next steps.

Download Presentation

INSPIRE Data Specifications Annex II & III Themes Collaboration with projects: LC & LU

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. INSPIRE Data SpecificationsAnnex II & III ThemesCollaboration with projects: LC & LU Maria Vanda Nunes de Lima Edinburgh 28 June- 1st July 2011

  2. Outline • INSPIRE Directive • Data Specifications- Interoperability of spatial data sets and services • Methodology • Where we are • Next steps INSPIRE progress

  3. What is INSPIRE? “Infrastructure for Spatial Information in the European Community” Distributed infrastructure General rules for establishment Environment 34 Spatial Data Themes Entry into force 15/5/2007 27 countries 21 languages European legislation

  4. Scope INSPIRE Directive • Spatial data held by or on behalf of apublic authority operating down to the lowest level of government when laws or regulations require their collection or dissemination • INSPIRE covers 34 Spatial Data Themes laid down in 3 Annexes • required to successfully build environmental information systems

  5. INSPIRE Legal Acts published in the Official Journal • Directive 2007/2/EC of the European Parliament and of the Council of 14 March 2007 establishing an Infrastructure for Spatial Information in the European Community (INSPIRE) 14.03.2007 • INSPIRE Metadata Regulation 03.12.2008 • Commission Decision regarding INSPIRE monitoring and reporting05.06.2009 • Regulation on INSPIRE Network Services19.10.2009(View and discovery) • Corrigendum to INSPIRE Metadata Regulation 15.12.2009 • Regulation on INSPIRE Data and Service Sharing29.03.2010 • Commission Regulation amending Regulation (EC) No 976/2009 as regards download services and transformation services10.12.2010 • COMMISSION REGULATION implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services10.12.2010 (Annex I) • COMMISSION REGULATION amending Regulation 1089/2010 as regards interoperability of spatial data sets and services 05.02.2011(code list) European law affecting 30+ countries, 21+ languages

  6. INSPIRE’s participatory approach • To-date, over 650 organizations are registered as INSPIRE stakeholders • Providing experts, reference material, projects • Participate in user requirements survey • Participate in reviewing and testing of specifications • And learn from each other • INSPIRE contributes to global solutions • INSPIRE is EU contribution to Global Earth Observation System of Systems • Stakeholders participating in INSPIRE are international • Group on Earth Observations • United Nations Geospatial Information Working Group • Global Terrestrial Observing System (GTOS) of the United Nations • EuroGeographics • World Meteorological Organisation Region VI grouping (RAVI) • WMO Global Runoff Data Centre • Stakeholders participating in INSPIRE are National • Stakeholders participating in INSPIRE are Projects Interested? Register! http://inspire.ec.europa.eu

  7. Development of data specification- step wise process Directive (2007) Modelling Framework for INSPIRE data specifications (2008) Data specifications for the 9 Annex I data themes (2009) Data specifications for the 25 Annex II/III data themes (2012) Part of the legal framework  Implementation mandatory for European Member States Interoperability of spatial data sets and services (Implementing Rule) (2009..2012)

  8. Steps 1+6:*Use Case Development * Implementation, Test and Validation, Cost-Benefit Analysis Use case development As-is analysis Driver of the process... ...helps understand user requirements, and justify the current model structure Validation of use cases in: “Fitness for purpose testing”... Gap analysis Data specification development Identification of user requirements and spatial object types • D 2.6 • The use cases and application scenarios for the environmental policies to be supported by the INSPIRE data specifications in this development cycle are identified. • The use cases are described in sufficient detail to clarify the requirements regarding the data from the spatial data themes. Implementation, testing and validation Implementation, testing and validation Cost/benefit analysis

  9. Data Specifications • Annex I • Coordinate reference systems • Geographical grid systems • Geographical names • Administrative units • Addresses • Cadastral parcels • Transport networks • Hydrography • Protected sites • Regulation published in Official Journal • COMMISSION REGULATION implementing Directive 2007/2/EC of the European Parliament and of the Council as regards interoperability of spatial data sets and services 10.12.2010 (Annex I) • COMMISSION REGULATION amending Regulation 1089/2010 as regards interoperability of spatial data sets and services 05.02.2011 (code list) • 9Technical Guidelines published INSPIRE progress

  10. Grouping of Themes • Annex II • Elevation • Land cover • Ortho-imagery • Geology • 21. Mineral resources (Annex III) • Annex III • Statistical units • 10. Population distribution – demography • Buildings • Soil • Land use • Human health and safety • Utility and governmental services • Environmental monitoring facilities • Production and industrial facilities • Agricultural and aquaculture facilities • Area management/restriction/regulation zones & reporting units • Natural risk zones • Atmospheric conditions • Meteorological geographical features • Oceanographic geographical features • Sea regions • Bio-geographical regions • Habitats and biotopes • Species distribution • Energy Resources INSPIRE progress

  11. Who is involved Thematic working groups -19 TWGs for Annex II&III TWG Facilitators TWG Editors Domain experts EC INSPIRE Team (INSPIRE CT = DG ENV, DG JRC, DG Eurostat) Technical coordination = JRC INSPIRE team Data Specifications Drafting Team (DS DT) Stakeholders Legally mandated organisations (LMOs) Spatial data interest communities (SDICs)

  12. Annex II/III Roadmap Kick-off: 19-20.04 2010 Data Specification v1 (29.10.2010) Data Specification v2 (06.2011) Testing/Consultation (06-20.2011) Data Specification v3 (04.2012) Draft IR (10.2012) IIIIII II III IV I II III IV 2010 2011 2012

  13. Now: Consultation & Testing 22 June- 21 October 2011 • Two separate, but closely related activities: http://inspire.jrc.ec.europa.eu/index.cfm/pageid/201/consultation/45851 • Main aim of consultation: • Comment the data specification documents (V.2.0) • Domain-specific aspects and Cross-thematic aspects (overlaps and gaps, inconsistencies) • Main aims of testing: • To test data specifications (V2.0) against real spatial data • To report back to the INSPIRE CT and TWGs gained experience • will be used to improve the data specifications for v3.0 • the basis for amendment of the Regulation on Interoperability of spatial data sets • Testing Kick off meeting done (22 June2011 Exchange testing releated information

  14. Consultation & Testing 22 June- 21 October 2011 • Documents for Consultation & Testing • D2.8.I.x Data Specification on <Theme Name> – Draft Guidelines: 24 PDF documents • D2.5 Generic Conceptual Modelupdates • D2.9 Guidelines for the use of Observations & Measurements and Sensor Web Enablement-related standards in INSPIRE Annex II and III data specification For Reference • GML Application Schemas: 1 ZIP archive • UML Model (XMI, EAP, HTML) • The “INSPIRE Data Specifications Cost-benefit considerations” document • INSPIRE Annex I testing summary report

  15. Testing – Overview • Feasibility testing  main focus of testing • measure technical feasibility and effort related to transforming existing data (e.g., from Member States’ organisations) into data compliant with the requirements and schemas proposed in the data specification documents • Fitness for purpose testing • assess the benefits of harmonised data specifications from an end-user or application point of view • Provide cost-benefit information • Related to the testing • Contextual / not directly related to testing

  16. Outcomes Testing 20.06.2011-21.10.2011 Consultation 20.06.2011-01.10.2011 • From Testing • SDICs/LMOs: Testing report via WebForm • SDICs/LMOs: Comments delivered via XLS spredsheet • INSPIRE CT: Import of XLS comments to JIRA • FromConsultation • SDICs/LMOs: Comments delivered via XLS spreadsheet • INSPIRE CT:Import of XLS comments to JIRA Call for Consultation Published 22.06.2011 Call for Testing Out 08.04.2011 XLS template for comments 01.06.2011 Testing Reports (WebForm) XLS template for comments 01.06.2011 SDIC/LMO DB Jira

  17. Next steps: roadmap Comment resolution : • Comments resolution: 24 October-02 December 2011 • Comment Resolution Workshop: 05-07 December 2011 • Comment resolution (cont.) 08 December to 27 January 2012 Delivery DS v2.9: 24 February 2012 • Internal revision DS v2.9: 27 Febr.- 23 March 2012 • Preparation DS v3.0 RC: 26 March – 20 April 2012 • Preparing draft IR: 23 April- 29 June 2012 Done by JRC data specification team with support from TWGs • ISC: 02- 27 July 2012

  18. Next steps • Draft IR: 03-21 September 2012 Done by JRC data specification team with support from TWGs Until there: Still time and need to participate at the development process THANK YOU

More Related