1 / 33

Simulations and Tools for Telecommunication Tietoliikenteen simuloinnit ja työkalut 521365S

Simulations and Tools for Telecommunication Tietoliikenteen simuloinnit ja työkalut 521365S Harri Saarnisaari Phone: 5532832 Email: harri.saarnisaari@ee.oulu.fi. Course Description. Lectures Wed 10:15 – 12:00 TS126 starting 22.2.2006 Course includes Lectures

Download Presentation

Simulations and Tools for Telecommunication Tietoliikenteen simuloinnit ja työkalut 521365S

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Simulations and Tools for Telecommunication Tietoliikenteen simuloinnit ja työkalut 521365S Harri Saarnisaari Phone: 5532832 Email: harri.saarnisaari@ee.oulu.fi

  2. Course Description • Lectures • Wed 10:15 – 12:00 TS126 starting 22.2.2006 • Course includes • Lectures • Compulsory simulation exercise (with Simulink) • Final exam • Lectures include • theoretical part • Simulation tools introduction part • Details, schedule and notes at lecturer’s home page • http://www.ee.oulu.fi/~harza

  3. Course Description … • Lectures answer to questions • Why we simulate? • When we simulate? • How we simulate? • Lectures consider simulations of • Communication systems • Protocols • Algorithms • Transceiver RF/IF-parts

  4. Course Description … • Theoretical part includes • Modeling of communication systems using simulations • Simulation methods • Confidence limits of simulations • Noise and random number generation • Modeling of fading channel

  5. Course Description … • Introduction to simulation tools part includes • MATLAB (Harri Saarnisaari) • Algorithm simulation • SIMULINK (Pasi Maliniemi) • Algorithm and system simulation (build on Matlab) • ADS (Timo Kumpuniemi) • RF-simulation tool • OPNET (Jarmo Prokkola) • Network simulation tool • CSS, cocentric system studio (Juha-Pekka Mäkelä) • Link level simulation tool • HFSS/MICROWAVE (N.N) • Microwave simulation tool • SUPERNEC (Veikko Hovinen) ?? • Antenna simulation tool

  6. Course Description … • Compulsory exercise includes • Simulation exercise with Simulink • Managed by Pasi Maliniemihttp://www.ee.oulu.fi/~pamalini • Has to be passed acceptably before credit units are earned • Final exam • Some easy theoretical questions • 26.5 • Credit points • 3.5

  7. Course Description … • Course book • Michel C. Jeruchim, Philip Balaban & K. Sam Shanmugan: “Simulation of Communication Systems: Modeling, Methodology and Techniques”, Kluwer Academic/Plenum Publishers, 907 s., 2000. • The course uses the following parts of the book • Chapter 1: 112 (12 s) • Chapter 2: 1354 (42 s) • Chapter 3: 5563, 7491 (27 s) • Chapter 4: 181192 , 195198 (16 s) • Chapter 6: 289294, 308316, 320, 328334, 350356 (30 s) • Chapter 7: 371379, 383389, 392393 (18 s) • Chapter 8: 407410, 534540 (11 s) • Chapter 9: 545563, 572576, 614621 (32 s) • Chapter 10: 625, 636642, 655657, 664667 (15 s) • Chapter 11: 669, 678688, 693694, 696, 710716, 737742, 757758 (30 s) • Chapter 12: 763793 (31 s) • These are good-to-know background material, and may involve material asked in the exam

  8. Course Description … • Material available • Notes at lecturer’s home page • as soon as they are ready • Notes and mentioned pages of the book in the Tutor-room and Telecommunications Laboratory library • Contact • You may contact me by phone or email and ask for meeting • Best times are Wednesdays before or just after the lectures

  9. Simulation • Definition (a possible) • The discipline whose objective is to imitate one or more aspects of reality in a way that is as close to that reality as possible • Synonym (sometimes used) to simulation • Artificial reality (man made reality) • Motivation behind simulation • It is a way to “try things out” before building the real thing • Simulations concern how the waveforms or signals flow through the system • How subsystems (blocks) and their different parameters affect the system’s performance?

  10. Simulation … • Use and importance of simulations has been grown recently since the digital computers have developed and became more powerful • More complex and more real things can be simulated • Difference between simulations and reality has been decreased

  11. Simulation … • The goal in any system development is to do it in a timely, cost-effective and effort-free manner • Communication systems have become more complex • More complicated overall systems and operating environments • More complicated signal processing • More complicated microwave & other devices • As a consequence, computer-aided analysis and design is the only way to achieve the goal

  12. Simulation … • In the system development one has to design a system to meet some requirements and often has some limitations • The designer usually can select possible candidate solutions based on his/her prior knowledge and/or analytical results • These analytical results are usually obtained using simplified assumptions of reality (often oversimplified) • The used formulas are often evaluated using digital computers, although simple paper-based rules also exist in some cases • These formula-based techniques provide considerable insight to the problem but cannot solve all questions

  13. Simulation … • The designer then creates a simulation model that are closer the reality than simplified analytical results • Based on simulation results he/she chooses a smaller set of candidate solutions • Piece of hardware (a prototype) is then (possibly) build to verify critical parts and/or new technology • Measured demonstrator/prototype parameters may be used in simulations to increase the simulation accuracy

  14. Simulation … • Differences between simulation and measured results? • Due to errors/simplifications in the simulations? • Due to errors or incapability to produce in prototyping? • The goal is to build the required hardware, but this may fail • Build hardware is different than the simulated one • One has to find out the source for the difference before continuing the process and then solve the problem or find another solution

  15. Simulation … • Once all the aspects are considered and designed satisfactory (requirements and limitations are satisfied), the product may be build

  16. Simulation … • In general, the designer has three tools • Formula based • Simulation • Prototyping

  17. Simulation … • All can be used separately but usually a hybrid of these is used, and it is most often the most powerful way • Formula based method is not sufficient since it simplifies real life effects • Prototyping is the most close the reality, but it is often time-consuming, expensive and has a limited flexibility • Simulations are flexible (parameters can be changed rather freely), they are rather close to reality (if the used model is) but a disadvantage is that more complex simulation models require more powerful computers and/or more computation time • Increased simulation capabilities (quality in terms of reality) have caused a trend that prototyping is reduced as much as possible; some even dream to build products directly after simulation

  18. Simulation … • Analysis is still a valid and powerful method • Results are usually valid for several parameter values • More complex analysis can nowadays be made since analysis methods develop and more powerful computer tools become available • Simulation results cannot usually be generalized to different parameters, but the simulations show what happens with those particular parameters • Simulations are also used to verify analysis results, i.e., to check are the made simplifications too misleading or not

  19. Simulation … • The simulation model usually includes changeable parameters • The designer simulates the effects of the parameters to the performance of the systems and selects between the parameters and/or makes trade-offs since different parameters may affect differently to the different parts of the system

  20. Simulation … • The system is usually build of several subsystems • These subsystems are modeled and the signal (or its relevant features) is passed through the models • Simulations are also used to verify a subsystem (block) or a set of subsystems, not the whole system • However, the subsystem designer should be aware of effects of this subsystem to other subsystems/overall system to avoid “bad” parameter selections (from point of view of the other subsystems/overall system) • Good overall picture on designer’s research/work field is important to him/her

  21. Simulation … • The accuracy (how close to the reality it is) of the simulation depends on the accuracy of the models • Erroneous models yield misleading results, conclusions and selections and may be costly • Simulation models should correspond the reality tried to imitate! • The error should be in an acceptable level • Avoid using misleading models!

  22. Simulation … • Models may be obtained from existing knowledge of the subsystems • E.g., RF-devices used to build real systems • One may also found a model using simplified analysis of the subsystem • E.g. assume that subsystem is linear although in reality it may be non-linear • If subsystem model is totally unknown, it may be measured • E.g., measurement of a radio channel characteristics for the current problem

  23. Simulation … • However, use of more accurate models may be costly in terms of computer resources and programming time • Less accurate models have (very often) to be used in real life simulations • Modeling errors can be made in • System modeling • Device modeling • Random process modeling • Processing

  24. Simulation … • System modeling errors • Systems may include several elements and some of them (maybe those believed to have an insignificant effect to the investigated behavior) are ignored from the simulation model • Device modeling errors • Errors between the model and actual device • Random process modeling errors • Real life signals are random ones (or include such components) • Errors to model actual random processes and errors to generate (in computer) the modeled processes • Processing errors • Due to limitations of computing medium and methodology • E.g., actual analog waveforms modeled by discrete signals in computers (high over sampling rates, which may be used to model analog signals more precisely yield to increased simulation times)

  25. Simulation … • The models have to be validated (correctness check) • A single block • A bunch of blocks • The overall system • A possibility is to test them in a simplified environment where analytical results exist, and if the simulated results coincide with the analytical ones, the correctness has been “proved”, or, at least, some evidences about the correctness have been achieved • Also the random process generator has to be validated

  26. Simulation … • In summary, simulations are used • Since accurate analysis are very difficult or too time consuming • To verify are simplified analyses accurate or misleading • When one has to decide between different options (parameters, algorithms, building blocks, …) which may have nonlinearities (= hard to analyze) • Simulations are often much faster way to obtain the results • To fasten and saving costs in production • Simulations are a tool in the design process!

  27. Simulation … • In summary, in simulations • One has to program the model of the system and its components (subsystems) • Existing simulation tools involve many prepared models simplifying the programming • However, one has to validate the correctness of the simulation program (if it s not already done by others) • The modeling accuracy affects the simulation accuracy and also the efforts needed to make the simulation system • Often simplified models are used • One has to be careful with simulation error sources and validate correctness of his/her simulations

  28. Simulation … • In summary, prepared simulation programs • Usually contain only necessary parts of the system • Parts which are believed to have insignificant effects are ignored for simplicity (and to save efforts and time) • Use a high-level model if possible (if their accuracy is sufficient) • High-level model is e.g. a filter transfer function • Low-level models include details of (sub)systems • E.g., build a filter model using models of actual elements used to build those filters • Low-level modeling is time and effort consuming, and may not be necessary for the particular problem

  29. Simulation … • Once more • Simulations are used to imitate reality • They may be used to check system’s performance and expected behavior • However, the product (a mess of hardware and software) may not perform like simulations (and analysis) predict. Why? • Too simplified analysis & simulation models • Errors in modeling • Errors in simulation and analysis • Errors and/or incapability in producing

  30. Examples • Examples of industry fields where simulations are used • Aerospace and defense • Communications • Automotive • Biotechnology • Medicine • Electronics • Financial modeling • Semiconductors

  31. Examples • Aerospace and Defense • Every major aerospace and defense organization in the world uses simulation products and services to develop air, naval, land, and space systems. • Engineers and scientists rely on simulation tools for Model-Based Design and technical computing in programs such as the Airbus A380, F-35 Joint Strike Fighter, Mars Exploration Rover, as well as unmanned aerial vehicles and advanced wireless systems.

  32. Example: algorithm design

  33. A “serious” example • E.g., you want to simulate your way from a bar to your home so that you can estimate how long it takes • You have to think what things affect the model • Amount of alcohol, your capability to walk directly after certain amount of alcohol, …. • How you take your steps • front, back and sides (what is the random process describing this) • Are there enticements • Open bars on your route, a grill, irresistible persons (different/same sex depending on your tendency) • You have to think how much time you want to spend to build the model • Will you make a perfect model (takes possibly a long time and a lot of efforts) • or do you ignore some effects that are too cumbersome to program • and end up to a more easily made simulation model which possibly does not give as good results as the more accurate model • After the simulator is ready, you will • run the simulations • compare simulation results to reality (if you could remember the reality) • If simulations and reality coincide (within certain limits which you have to set) you are satisfied to your simulator, otherwise you have to improve your models (used inside the simulator)

More Related