20 likes | 123 Views
Explore the detailed setup of antennas at Ridge Station, including future antenna configurations, coax switches, and system controls for optimal signal reception. The as-built diagram provides a visual guide to the intricate setup at this station.
E N D
12/17 Ridge 30 CL-33 160 80 40 20 15 10 SA Station #1 Top Ten Control Box F2 F3 F1 Station # 1 Manual or computer selected as at present. 160 F3 Ridge (12/17 and 30 antennas can be manually cabled in instead Of Future1 and Future2) Station #2 80 12/17-F1 30-F2 20Sys 10Sys 15 Sys 20 Sys 40 Yagi Stn 3 Stn 3 Stn 3 Stn 3 10 15 20 40 Station # 2 (The right hand coax switch willl be located below the LK-800,the left hand one below the Station 3 transceiver.) 20 Sys 40 Yagi 10 Sys 15 Sys 80Sys Ridge NC Station #3 NC F3 Stn 4 160 Stn 4 Stn 4 Stn 4 CL-33 20 40 10 15 Station # 3 • “10 Sys” etc. refers to 10 Meter System, including all antennas switchable by the 10 StackMatch Box. • The “80 Meter Sys” is all 75/80 antennas at PJ2T; these will be selectable from a five position control box at Station # 1. • The switches under Stations 2 and 3 coax boxes are blue/green Daiwa two position coax switches. • “Ridge” is the tribander fixed on Europe on top of the hill. • “F1” means future antenna 1, etc. CL-33 20 Sys 15 Sys 80 Sys Station #4 160/15 PJ2T Station Coax Switches Pictorial Diagram 2 January 2008 W0CG As Built February 2008 Ridge 160 40/10 40 Yagi 10 Sys Station # 4