1 / 5

Pressure casting technique for transtibial prosthetic socket fit in developing countries

This study investigates the use of a low-cost and low-skill pressure casting technique (PCAST) to fabricate and fit transtibial (TT) prosthetic sockets in developing countries. The aim is to address the challenges faced by people with lower-limb amputation in accessing affordable and skilled prosthetic services.

rflowers
Download Presentation

Pressure casting technique for transtibial prosthetic socket fit in developing countries

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pressure casting technique for transtibial prosthetic socket fit indeveloping countries Peter Vee Sin Lee, PhD; Noel Lythgo, PhD; Sheridan Laing, BEng; Jimmy Lavranos, BSc; Nguyen Hai Thanh, BSc

  2. Aim • Investigate low-cost and low-skill pressure casting technique (PCAST) to fabricate and fit transtibial (TT) prosthetic sockets in a developing country. • Relevance • Many challenges are faced by people with lower-limb amputation in developing countries such as Vietnam. • Foremost are cost and access to skilled prosthetic services.

  3. Method • Subjects: • 13 active prosthesis users with unilateral TT amputation were recruited from Vietnamese Training Centre for Orthopedic Technologies (VIETCOT) in Hanoi, Vietnam. • Prosthetists: • VIETCOT staff with International Society for Prosthetics and Orthotics category II qualifications fabricated and fitted prostheses using PCAST technique. • Measures: • Satisfaction with prosthesis, physical function, and gait after fitting and following 167 days of use.

  4. Results • Satisfaction: • High scores after initial fit and extended usage period. • Physical Function: • 6 meter walk test significantly improved. • Gait: • Spatial and normalized temporal gait unchanged after usage period.

  5. Conclusion • Study shows that PCAST technique can be used to fabricate and successfully fit TT prosthetic sockets in conjunction with low-cost prosthetic components in a developing country.

More Related