1 / 4

Michael Mirmak January 22, 2008

A Selection of Common Mode Requirements in Industry Specifications Background for New IBIS Measurements. Michael Mirmak January 22, 2008. USB 2.0. TX, Full/low speed signaling : the crossover voltage (Vcrs) must be between 1.3 and 2.0 V

Download Presentation

Michael Mirmak January 22, 2008

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Selection of Common Mode Requirements in Industry SpecificationsBackground for New IBIS Measurements Michael Mirmak January 22, 2008

  2. USB 2.0 TX, Full/low speed signaling: the crossover voltage (Vcrs) must be between 1.3 and 2.0 V RX, High speed: (guideline) reliably receive signals with CM voltage (Vhscm) between -50 mV and 500 mV (nominal at 200 mV) RX: Differential Common Mode Range (Vcm) must be between 0.8 - 2.5 V (includes Vdi range)

  3. Serial ATA SATA 2.0 Vcm, AC Requirements TX: 50 mVpp RX: 100-150 mVpp SATA 1.0 Vcm AC Requirements TX, RX: 0-2.0 V on each signal, all conditions RX: 100 mV max Sinusoidal amplitude, at connector; Frequency between 2 and 200 MHz; Common mode transients to settle within 10% of DC value within 10 ns SATA 1.0 Vcm DC Requirements RX: 200-450 mV (at receiver connector)

  4. PCI Express* Electrical Idle: the state of the output driver in which both lines, D+ and D-, are driven to the DC common mode voltage VTX-CM-AC-PP TX AC common mode voltage: 100 mVPP (5.0 Gt/s) VTX-CM-AC-peak TX AC common mode voltage: 20 mV (2.5 Gt/s) VTX-AC-CM-PP and VTX-AC-CM-peak are measured over at least 106 UI. VTX-DC-CM TX DC common mode voltage: 0 - 3.6 V for 2.5 and 5.0 Gt/s Measured at the TX pins under any conditions.

More Related