1 / 21

Serial Server and Hardware Configuration Guide

Learn how to set up and configure your hardware for serial server communication. Connect units to the network and power, ensure computer connectivity, find IP addresses, and establish TCP and UDP communication. Discover how to configure serial settings and virtual COM ports with step-by-step instructions.

rebekahm
Download Presentation

Serial Server and Hardware Configuration Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Serial Server Configuration Peter Szyszko

  2. Hardware Configuration • Unit has to be connected to network and powered. • Computer has to be connected to the same network. • Ipconfig command from dos prompt shows current computer IP. • Monitor utility will help to find unit on the network and identify it’s current IP address. • In order to have TCP communication it is necessary to have computer and device server in the same subnet or in case device is in different network segment- appropriate gateway and network configuration.

  3. STE-501 interfaces

  4. Finding Computer IP Address

  5. Select Auto IP for DHCP Address Resolution Monitor utility – IP address change

  6. Web Page Login

  7. COM1 – TCP Server Configuration

  8. COM1 – TCP Server Configuration

  9. Connection to TCP Server from Hyper Terminal

  10. Destination computer IP and port number COM1 – TCP Client Configuration

  11. COM1-TCP Client Configuration

  12. Destination computer IP and local listening port and destination port COM1- UDP Configuration

  13. COM1- UDP Configuration

  14. COM1- Serial settings configuration

  15. COM1 - Virtual COM port configuration

  16. Computer Software Configuration • Serial IP redirector hat to be installed from CD. • Virtual COMs have to be selected and configured

  17. Computer Virtual COM port configuration

  18. Computer Virtual COM port configuration

  19. Computer Virtual COM port configuration

  20. Computer Virtual COM port configuration

  21. Virtual COM4 Test

More Related