JWG1 - Wind Turbine Gearboxes. IEC/ISO 61400-4 - Design Requirements for Wind Turbine Gearboxes. IEC/ISO 61400-4 - Design Requirements for Wind Turbine .
IEC/ISO 61400-4 - Design Requirements for Wind Turbine Gearboxes
JWG1 works as a formal level 5 liaison with ISO TC60 (Gears) under IEC-lead with active though informal participation from ISO TC4 (Rolling Bearings) and ISO TC28 (Lubricants).
The CD was circulated to IEC TC88 and ISO TC60 by October ‘09. The hearing period closed in January ’10. In total, 930 comments were received for the CD, and about 50% were deemed editorial. Two meetings are planned to deal with these comment.
ISO TC60 had a formal vote at the end of the committee stage, resulting in 2 out of 11 P-members who participated in the ballot voted against passing the document on to enquiry stage. Because of this negative vote, we are advised by the TC60 chairman that after all comments to the first CD are resolved, we will need to issue a second CD and repeat the comment, ballot and resolution process.
The first meeting dealing with CD comments was held in March 2010.
We addressed a bit more than half of the substantive comments (53%).
A little less than 60% of those were accepted as submitted or in modified form.
6 of the 202 decisions taken could not be resolved by consensus but required a vote, 4 of which votes ended with a close call (less than 2/3 majority). These constitute a potential risk in proceeding to CDV/DIS.
The progress was satisfactory and about half of the comments have been reviewed, and there are no substantial disagreements that could not be resolved within the agreed meeting schedule until April ’10. An updated document is still planned to be available by June ‘10.IEC/ISO 61400-4 - Design Requirements for Wind Turbine