1 / 7

Previous week

Previous week. Nanorod growth with increased precursor concentration ITO substrate is used – Al film was dissolved Alignment was not improved. Previous week. TPT overcoat – PDMS conformal contact failed Plasma etching failed to reveal nanorod heads 2 nd growth step is also failed.

ranger
Download Presentation

Previous week

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Previous week Nanorod growth with increased precursor concentration ITO substrate is used – Al film was dissolved Alignment was not improved

  2. Previous week TPT overcoat – PDMS conformal contact failed Plasma etching failed to reveal nanorod heads 2nd growth step is also failed

  3. This week TPT injection is not worked because of large particles → Spincoating (Polystyrene/Toluene) is used Plasma etching : failed (sample too close to electrode)

  4. This week Nanowire height is increased ~3x as applied voltage increased from -1.2V to 2.0V Still insufficient to good align (>10um length is required) -1.2V 80C ~1.5um -2.0V 80C ~4.4um

  5. This week Nanowire growth with volage over -2.0V → Nanowires are shorten ITO glass is not appropriate for nanowire growth (No good result without additional seed layer in references) -2.6V 80C -2.3V 80C -2.0V 80C (All picture x15000)

  6. Next week Nanowire growth on ZnO:Al substrate (Good growth is guaranteed, no verification experiment) ① AZO microgap patterning ② PS coating and plasma etching ③ Active channel formation by lateral growth patterned AZO Glass substrate

  7. Zinc deposition Large surface roughness (induces shunt resistance)

More Related