1 / 59

Operating Your Landfill Chapter 02

Operating Your Landfill Chapter 02. Kentucky Department of Environmental Protection Division of Compliance Assistance 300 Fair Oaks Lane • Frankfort, KY 40601 Phone: 502.564.0323 • 800.926.8111 • Fax: 502.564.9720 Email: envhelp@ky.gov • Website: dca.ky.gov.

ramiro
Download Presentation

Operating Your Landfill Chapter 02

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Operating Your Landfill Chapter 02 Kentucky Department of Environmental Protection Division of Compliance Assistance 300 Fair Oaks Lane • Frankfort, KY 40601 Phone: 502.564.0323 • 800.926.8111 • Fax: 502.564.9720 Email: envhelp@ky.gov • Website: dca.ky.gov

  2. What are the operational requirements of solid waste landfills and why do they exist?

  3. Chapter 02 General Objective Understand the purpose and details related to the operational requirementsfor all landfills.

  4. Chapter 02 Specific Objectives • Understand the regulations and permit for operating requirements for all landfills • Describe the necessary scalehouse activities related to waste (volumes, weight, sources and types) • Demonstrate knowledge of landfill access regulations

  5. Chapter 02 Specific Objectives • Explain properoperations in working face(waste placement, working face size, compaction, daily cover, litter, control of surface water, erosion, leachate, gas, litter) • Understand EPS regarding fire prevention, explosive gas control, and vector control. • Describe landfill manager recordkeeping requirements(waste quantity reports, random waste inspections, annual volume survey)

  6. Landfill Operations • Regulations • At the Scalehouse • The Working Face • Travelling to • Entering • At the Working Face • EPS • Environmental Performance Standards • Manager Recordkeeping Requirements

  7. Solid Waste Regulations • Solid Waste • EPS: 401 KAR Chapter 47:030 • Regulations: 401 KAR Chapter 47 • Permit Conditions • Special Waste • EPS: 401 KAR Chapter 30:031 • Regulations: 401 KAR Chapter 45 • Permit Conditions

  8. Landfill Manager Responsibilities The owner, certifiedoperators, and certified landfill managersare responsible foroperating the landfill in compliance with all regulatory and permit requirements.

  9. Landfill Manager Responsibilities A copy of the current permitmust be displayed at the siteand a copy of approved plans shall be reasonably available.

  10. At the Scalehouse

  11. Determining Operational Costs • Goodrecords are key (and REQUIRED). • Calculate volume of waste disposed • Monitor filling progress • Project landfill space utilization • Determine cost per ton of waste

  12. Determining Operational Costs • Requirements 401 KAR 48:070, Section 13 • Actual weights KRS 224.43 - 330(1) • Records on how waste stream varies • Waste Volume • Measure quantity of waste received daily • Waste Source (from each truck) • Quarterly Report 401 KAR 47:190, Section 8

  13. At the Scalehouse • The scale house and compactor operators must spot-check all incoming loads for: • unauthorized wastes, • hazardous wastes, etc. and • waste from unpermitted geographic sources. • Scale operators are the first line of defense against accepting unauthorized waste.

  14. Travelling to the Working Face

  15. Travelling to the Working Face • Posting Signs 401 KAR 48:090; 45:110 (prevents unauthorized dumping) • Landfill Name • Owner Name • Operator Name • Emergency Phone Number • Operating Hours for Waste Acceptance • Permit Number (CDD and Contained Landfills) • Readable from Distance (CDD and Contained Landfills)

  16. Travelling to the Working Face • Must abide by operating hours posted • Certified Operator must be available during operating hours • Warning Signs • Posted at all Access Points of contained landfill (100 ft.) • Warn of Site Hazards (gases, equipment, truck movements)

  17. Travelling to the Working Face • Access • Owners and operators of solid waste landfills MUST control public access and prevent unauthorized traffic • 401 KAR 47:030, Section 11(3) (solid waste) • 401 KAR 30:031, Section 10(3) (special)

  18. Travelling to the Working Face • Contained Landfill Access 401 KAR 48:090 • Lockable entrance ways at all access points • Major access road from publicly maintained highway to the landfill • Perimeter road • All-weather road to within 200 feet of the working face.

  19. Travelling to the Working Face • Owner or Operator Responsibilities • Removing all debris, mud, and waste from vehicles BEFORE they leave the site • Removing any landfill debris, mud, and waste from off-site roadways • Directing Traffic w/barriers | signs • Prevents unauthorized dumping away from working face • Prevents accidents

  20. Entering the Working Face Area ALL waste unloaded MUST be SUPERVISED by certified landfill personnel. • Prevents accidents • Prevents unauthorized scavenging • Ensures detection of unauthorized waste • Prevents unloading that exceeds capacity • Allows unloading in specified areas

  21. Entering the Working Face Area Unloading • Determined by site design • Dumping at the BASE of the working face and PUSHING WASTES UP is PREFERRED. • Equipment operates more efficiently • Maximum compaction rates are obtained • Easier to control working face size • Blowing litter is minimized

  22. THE Working Face Working face exact size is NOT specified by regulation • Contained landfills are required to confine dumping to SMALLEST PRACTICAL AREA 401 KAR 48:090, Section 9 • Some permits may designate specific dimensions. • Allow approximately 2 blade widths per piece of equipment operating

  23. THE Working Face COMPACTION • Extremely important factor in reducing problems • Benefits • Eliminates Large voids (holes) • Less cover is used • Conserves air space • Reduces eventual settling • Reduces blowing litter • Promotes surface water runoff • Creates a less permeable fill (reduces leachate)

  24. OPTIMAL COMPACTION • Maximum Practical Density • Compaction Rate • Equipment • Slope • Shallow Layers • Passes • Cover • Litter • Surface Water Control • Prevent Run-on • Prevent Run-off • Control Erosion • Leachate Control

  25. OPTIMAL COMPACTION • Compaction Rate • Maximizing waste compaction rate is one of the most critical aspects of landfill operation • 1,000,000 cu. yd. Contained Landfill Site Example • 1,100 vs. 1,200 lbs./cu. yd. of garbage density • $36 per ton tipping fee • Additional GROSS PROFIT of $1.8 million • Not necessary to construct additional airspace • 500 tons per day of incoming wastes • 4-month postponement for next cell construction

  26. OPTIMAL COMPACTION • Equipment • Must Be Appropriate • TYPE • SIZE • VOLUME OF WASTE RECEIVED • VOLUME OF SOIL TO BE MOVED • Guidelines for Selecting Equipment (CH 4)

  27. OPTIMAL COMPACTION • Slope • Non-Contained Landfill • Track-type equipment • 3:1 Slope • Concentrate weight over smaller track surface area • Contained Landfill • Flat Ground • Weight is already concentrated over small area

  28. Slope vs. Future Settlement in Feet[p.12, Figure 2.1]

  29. OPTIMAL COMPACTION • Shallow Layers • No More than 2 feet thick • Reduces Effects of Cushioning • Lift Dozer Blade 2-3 feet off the ground • DO NOT EXCEED Lift height of 8 feet (or height specified in landfill permit) for CDD Landfills

  30. OPTIMAL COMPACTION • Passes • Run over waste 3-5 times • Fewer than 3 passes results in POOR compaction • Densities DO NOT increase after 5 passes. • Contained Landfills: 4 passes required • Equipment Passes (More in Chapter 4)

  31. Density vs. Number of Passes[p.13, Figure 2.2]

  32. OPTIMAL COMPACTION • Contained Landfills 401 KAR 48:090, Section 9 • SUFFICIENT EQUIPMENT to SPREAD and COMPACT ALL WASTE within 2 HOURS of RECEIPT • LAYERS not to exceed 24 inches in depth • GOAL: In-Place Waste Density of 1,200 lbs./cu. yd. in a completed cell • Steel wheel compactors • Min. gross ground pressure of 325 lbs./linear inch of wheel width • Gross weight of 30,000 lbs. • 130 horsepower engine • Backup equipment must be available within 24 hours of breakdown.

  33. OPTIMAL COMPACTION • Waste Cover • Consists of soil, crushed shale, siltstone, or other materials approved by the cabinet • Purpose • Reduce Vectors (fly eggs cannot emerge through 6 inches of soil) • Litter control • Fire Control • Reduce Odors | Controls Leachate and Gases • Promotes Runoff

  34. OPTIMAL COMPACTION • Waste Cover • Petroleum contaminated soil can be used IF • Maximum benzene concentration is less than (or equal to) 1.0 ppm AND • Material is NOT placed as daily cover during a precipitation event • Alternate Daily Cover (Belton Tarps, Posi-Shell) can be used IF APPROVED by the Cabinet in advance.

  35. OPTIMAL COMPACTION • Litter • Common problem at many contained landfills • Waste is only required to be covered on a periodic basis • Strong potential for waste to blow from working face to other landfill areas • ALL Litter MUST be picked up within 48 hours (401 KAR 48:090, Section 9)

  36. OPTIMAL COMPACTION • Surface Water Control • Important factor in maintaining your landfill • Surface Water MUST Be Controlled • Excessive amounts of rainfall /precipitation will soak into the fill • Produces Leachate

  37. Controlling Surface Water • Prevent Run-On • Diversion ditches and berms • Must be shown on engineering plans • Must be constructed • Prevent Run-Off • Entire site MUST be graded as necessary to drain rainwater and prevent standing water • Smoothly graded and crowned cover

  38. Controlling Surface Water • Capitalize on Landfill Topography as Designated in Approved Site Plans • Sediment Structure • Run-On/Run-off Ditches • Grading • Uncontrolled Surface Water can CAUSE EROSION • Discharge of sediment or fill material into Commonwealth waters is PROHIBITED (401 KAR 47:030 and 30:031)

  39. Controlling Erosion • Vegetation • interim cover • long-term cover • final cover • Constructing permanent or temporary • Earthen berms, silt fences, straw bales (steep slopes; slopes longer than 50 feet) • Diversion ditches • Erosion Matting • Equipment track prints - perpendicular to slope

  40. Controlling Erosion When erosion occurs, additional cover MUST be added and areas graded to maintain required depth of cover.

  41. Controlling Leachate • Prohibit free liquid disposal • Maintain small working face with optimal compaction • Use adequate cover on all areas • Maintain proper surface water control • Control erosion • Eliminate leachate outbreaks at contained landfills

  42. Controlling Leachate • Prevent daily and interim cover soils matching up to create impermeable horizontal layers between waste lifts and a conduit for leachate to the outbreak at the side of the landfill. • Use daily “windows” cut through soil daily cover, • Use geosynthetics for daily cover, then window interim and long-term cover before filling wastes.

  43. Leachate Production Conditions • Waste moisture content (watch for liquid draining from truck) • Large working face with poor compaction • Lack of adequate cover (use backhoe, dozer, or post hole digger to determine) • Poor grading or waste settling (check for standing water after rain) • Improperly functioning or blocked diversion ditches • Erosion ditches or gullies in the cover

  44. Controlling Leachate • Small Leachate Outbreaks • Identify and eliminate source • Cover with soil • IF leachate CANNOT BE CONTROLLED and is allowed to enter the waters of the Commonwealth, you will be operating in violation of the Clean Water Act.

  45. Maintaining Leachate Collection System • Leachate drainage layer designed and constructed to minimize clogging • Proper construction of leachate lines with cleanout entries is critical to prevent clogging • Pipes should have a minimum of 1% slope • System design should allow internal inspection, cleaning and maintenance • Leachate must be pumped on a periodic basis to prevent overflow and collection line clogging

  46. Disposing of Leachate from Contained Landfill • ONLY WITH PRIOR CABINET APPROVAL • Discharge into sanitary sewers or wastewater treatment plan • Return it to completed waste cells • Properly treating it in a permitted on-site wastewater treatment plant • Hauling and properly treating in permitted off-site wastewater treatment plant

  47. Disposing of Leachate from CDD or Special Landfill • Discharge to a permitted surface impoundment for collection before further treatment and • Discharge per the KPDES permit, or • Handle as contained landfill leachate per 401 KAR 48:060, Section 1 • Obtain proper approvals and permits

  48. Landfill Methane Gas Control • Contained Landfills MUST monitor for methane gas • Alarms must be installed in every onsite building • Owner or operator must monitor for explosive gas quarterly KAR 48:090, Section 4 • Underneath or in the low area of each onsite building • Along the boundary (as shown in permit) • At each passive gas vent installed under the final closure cap • At any potential gas problem areas (dead vegetation) • Other points required by the permit

  49. Landfill Methane Gas Control • Prevent Dangers to Human Health • Must install . . . • Passive Gas Vents (typically upon final cap construction) • Active Gas Collection Wells (with a flare or gas-to-energy system • CDD Landfills 401 KAR 47:030, Section 10(2) • Abundant drywall (gypsum) • Hydrogen Sulfide Gas (rotten egg smell) • Cabinet may require gas monitoring and control as permit condition to comply with air pollution control requirements

  50. Operation Potential Problems • Litter (401 KAR 47:030) • Fires • Vectors • Inclement Weather • Land Settlement • Subsidence Settlement – uniform settlement • Differential Settlement – non-uniform settlement

More Related