1 / 12

Uses of Modeling

A model is designed to represent reality in such a way that the modeler can do one of several things: Quickly estimate certain aspects of a system (screening models, analytical solutions, ‘back of the envelope’ calculations)

rafael-reed
Download Presentation

Uses of Modeling

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A model is designed to represent reality in such a way that the modeler can do one of several things: Quickly estimate certain aspects of a system (screening models, analytical solutions, ‘back of the envelope’ calculations) Determine the causes of an observed condition (flow direction, contamination, subsidence, flooding) Predict the effects of changes to a system (pumping, remediation, development, waste disposal) Uses of Modeling

  2. Analytical Models (Exp and ERF functions) 1-D solution, Ogata and Banks (1961) 2-D solution, Wilson and Miller (1978) 3-D solutions, Domenico & Schwartz (1990) Numerical Models (Solved over a grid - FDE) Flow-only models in 3-D (MODFLOW) MODPATH - allows tracking of particles in 2-D placed in flow field produced from MODFLOW Types of Ground Water Flow Models

  3. MODFLOW is a modular 3-D finite-difference flow code developed by the U.S. Geological Survey to simulate saturated flow through a layered porous media. The PDE solved is for h(x,y,z,t): where Kxx, Kyy, and Kzz are defined as the hydraulic conductivity along the x, y, and z coordinate axis, h represents the potentiometric head, W is the volumetric flux per unit volume being pumped, Ss is the specific storage of the porous material and t is time. GROUNDWATER FLOW GENERAL EQUATION

  4. Problem identification and description Model conceptualization Data Model development Model calibration & parameter estimation Model verification & sensitivity analysis Model Documentation Model application Present results MODEL PROCESS • Problem identification • Important elements to be modeled • Relations and interactions between them • Degree of accuracy • Conceptualization and development • Mathematical description • Type of model • Numerical method - computer code • Grid, boundary & initial conditions • Calibration • Estimate model parameters • Model outputs compared with actual outputs • Parameters adjusted until the values agree • Verification • Independent set of input data used • Results compared with measured outputs

  5. Starting New Model

  6. Importing a site map Marking Inactive cells

  7. Assign Boundary Constant Heads (East 2-3 m West (0 m) North & South inactive cells

  8. Assign Recharge Start from GIS

  9. Importing Wells (Agricultural, Domestic and Observation

  10. Running the Model Head output

  11. Model Calibration Through Calibration, a revision for the recharge by changing the rate and running the model until Observed values almost equal to Calculated values

  12. Results: Head, Velocity, Drawdown, etc.

More Related