1 / 4

Limiting Factors In Aluminum Extrusions

The most used metal in this process of extrusion is aluminum. Extrusion is one of the most efficacious procedures to mold and shape metal. You can obtain high-quality extruded aluminum by forcing hot raw aluminum through a steel profile for creating a definite shape. Once the extruded material comes out in a single piece, it can be cut as per your requirements. The extrusion process is not easy. But comprehending the aspects of it can help you be careful in the future for the success in aluminum extrusion. To know more about Aluminum Extrusion, Industrial Aluminum Profiles please visit the given URL.

Download Presentation

Limiting Factors In Aluminum Extrusions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Limiting Factors In Aluminum Extrusions The most used metal in this process of extrusion is aluminum. Extrusion is one of the most efficacious procedures to mold and shape metal. You can obtain high-quality extruded aluminum by forcing hot raw aluminum through a steel profile for creating a definite shape. Once the extruded material comes out in a single piece, it can be cut as per your requirements. The extrusion process is not easy. But comprehending the aspects of it can help you be careful in the future for the success in aluminum extrusion.

  2. Limitation to the process A diverse range of shapes can be attained. The shape of the part is important when the ease and cost of the extrusion are considered. There are certain limiting factors that need to be taken into account, otherwise, a part cannot be successfully extruded. Shape, alloy, size, tolerance, extrusion ratio, scrap ratio, tongue ratio, and finish are as important limiting factors as extrusion speed, billet temperature, the alloy to be extruded and extrusion pressure, and all of them are interrelated in the process of Aluminum Extrusion. Extrusion speed changes with the change in pressure created inside the container and metal temperature. The change is directly proportional. The pressure and temperature are limited by the alloy, which is utilized and the shape that is required. If the extrusion temperature is low (caused due to high pressure), the dimension of the extruded aluminum will be more precise, and the quality of the surfaces will also be good.

  3. Change in shape with temperature The flow of metal becomes more free-flowing when the extrusion speed and the billet temperature are high. The shape dimensions are prone to go below the admissible tolerances, specifically those of ribs or thin projections, if there is the slightest resistance. With the increase in speeds and extrusion temperature, the metal may lose its tensile strength owing to the enhanced temperature and tear at sharp corners or thin edges. When the speed and the temperature are extremely high, the connection between the die bearing surfaces and the metal creates a propensity towards twists and waves which heightens. The Industrial Aluminum Profiles is a technique used to transform aluminum alloy into objects with a definitive cross- sectional profile for a wide range of uses.

  4. Properties determine extrusion rate An alloy with high mechanical properties means that the extrusion rate is low. The time needed to begin the billet extruding is high when the friction between the liner wall and billet is more. The amount of mechanical working that will take place as the extrusion is one indicated by a shape’s extrusion ratio. A low extrusion ratio is the outcome of sections in shape that involves the biggest mass of metal will have little mechanical work implemented on it. It happens so in case of the first ten feet of the extruded aluminum. A huge amount of pressure is necessary to thrust metal via the smaller openings in the die and the maximum mechanical working will take place. The circumstance is contradictory to what happens when the ratio of extrusion is high. The tongue ratio also plays a crucial role in ascertaining a part’s extrusion performance. The greater the tongue ratio, the tougher will it be to extrude the part. CONTACT US: Website: https://aluminum-extrusions.com/

More Related