1 / 5

CASE 9.a.3.

CASE 9.a.3. Using the Trackpoint Driver to Track Multiple Beacons. Tracking a Diver. PROJECT: SAMPLE SPECIAL SURVEY 2004 HARDWARE: TRACKPOINT.INI. Beacon 1. Beacon 2. Beacon 3. Trackpoint Basics. X.

Download Presentation

CASE 9.a.3.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CASE 9.a.3. Using the Trackpoint Driver to Track Multiple Beacons Tracking a Diver PROJECT: SAMPLE SPECIAL SURVEY 2004 HARDWARE: TRACKPOINT.INI

  2. Beacon 1 Beacon 2 Beacon 3 Trackpoint Basics X • Trackpoint and Trackpoint LXT are acoustic systems that use a vessel-mounted transponder to track acoustic ‘beacons’. • The beacons can be attached to towfish, ROVs, divers… Y Boat Origin Trackpoint Transponder

  3. Trackpoint Driver Setup Beacon 1 • Driver: TRACKPOINT.DLL • Connect: COM Port with Trackpoint feed. • Setup: • Select Beacon number to track • Click ‘Multiple Target Server’. • This loads information on other beacons into shared memory so other instances of the TRACKPOINT driver can read them. • Offsets: • Enter offset from boat origin to ship-mounted transponder

  4. Trackpoint Driver Setup Beacon 2, 3, 4, … • Driver: TRACKPOINT.DLL • Connect: • None. It’s going to read info over the shared memory area. • Setup: • Select Beacon number to track • Offsets: • Enter offset from boat origin to ship-mounted transponder

  5. Trackpoint Beacons in SURVEY • Open ‘Sample Special Survey 2004’ project. • Start HARDWARE. • Click ‘File – Open Configuration’ • Select ‘TRACKPOINT.INI.’ • Close HARDWARE. • Start SURVEY.

More Related