PSC_Hands-Free_and_Hands-Off_Tools_Guidebook_

1. PSC HANDS-FREE SAFETY TOOLS NO ONE PROTECTS YOUR HANDS LIKE WE DO. GUIDE-BOOK

2. PSC HANDS-FREE SAFETY TOOLS WHO ARE WE? Project Sales Corporation (PSC) is a specialist Hand Safety company distributing and marketing the most complete range of hand protection products to the oilfield industry. Unlike other vendors, our focus is on mitigating risks associated with hand injuries while handling tasks in oilfields, platforms and yards in the Oil & Gas Industry. We brought Impact Gloves to India in 2009 and are the largest distributors of gloves for the oilfield selling over 10000s of pairs annually. PSC also introduced its Hands-Free Tools in 2014 and is one of the largest distributors worldwide. WHAT MAKES US SPECIAL IN HAND SAFETY? PSC is India’s largest manufacturer & exporter of Hands-Free Safety Tools that enables you to carry out tasks in the oilfield without getting your hands close to the pinch and crush points. Our tools help facilitate safe movement of the load by controlling the load from a distance, without physically touching the load. We have the most exhaustive product range from one source that includes Push/Pull Poles, Anti-Tangle Taglines, Hose Lifters, Manual Lifting Aids, Slogging Spanner Holders, Cylinder Holders, Small Pipe Lifters, Structural Plates Guiding Tools, etc. PSC Hands-Free Safety Tools was introduced in 2014 and is today exported to over 25 countries worldwide from the Gulf of Mexico to the North Sea and are used in the Deepwater Projects in East Coast of India. PSC Hands-Free Tools are approved by almost all major Oil & Gas Companies, Primary Metals and OEMs in Wind Energy. Our products are proof load tested and due to the sheer volumes, we sell, our pricing is the most competitive in the industry.

3. PSC HANDS-FREE SAFETY TOOLS PSC LOADGUIDER ANTI-TANGLE TAGLINE PSC LoadGuider Anti-Tangle Taglines are tangle resistant as it is designed with a rigid core and stiff cover braiding to prevent any swiveling on itself and wrapping around objects. The patented Helix spiral effect advances grip in wet and slippery conditions. Key Features - Made from Polyex 12 mm with 6 mm core (18 mm) Synthetic Rope offering Remarkable Strength and Light Weight. High visibility yellow color and color-coded Eyes for various lengths. Dirt-repellent cover and taglines can be washed if required. Available in various lengths 10, 15, 20, 25, 30, 35 and 45 feet. PSC SAFEGUIDER HI-VIZ ANTI-TANGLE TAGLINE PSC SafeGuider High-Viz Anti-Tangle Taglines are specially designed to be a safe alternative to ineffective and hazardous rope when guiding a suspended load. PSC SafeGuider Hi-Viz taglines are tangle-resistant and knot free and feature a high visibility coat to repel corrosive material and can be seen in low- light situations. They always retain their shape and are easily rolled up for storage. PSC GUIDE-IT SAFETY RIGGER TAGLINE PSC Guide-It Safety Rigger Tagline is made of finest polyester fibers in 14mm diameter with a unique ultra-lightweight 25kN galvanized steel composite swivel hook that opens 2” making it easy to attach to the load and comes with a safety latch. PSC SAFEGUIDER TAGLINE RETRIEVER TOOL These lightweight tools are used for the Hands-Free guiding and directing of heavy crane and forklift loads. This dielectric hardwood makes the product safe to use. The head has a serrated "S" head and a "C" head options depending on the requirement. The sand dipped finish in the grip area allows for better grip while working with these tools. Available in various lengths - 2, 3, 4, 6 & 8 Feet Lengths.

4. PSC HANDS-FREE SAFETY TOOLS PSC LOADGUIDER PUSH/PULL TOOL PSC LoadGuider Tool allows user to maintain a safe distance from the load at all times, thereby mitigating any risk of pinching or crushing hands and feet while handling suspended loads or maneuvering loads in tight positions until the load is in its final placement/resting position. The fiberglass push/pull pole fitted with a nylon head allows to safely maneuver loads at all times, by keeping hands-off from a potential pinch and crush injury zone. Available in sizes 21", 42", 50", 72", 96". PSC GUIDE-IT PUSH/PULL TOOL PSC Guide-It™ Hand Safety Tool assists in “Hands-Free” guiding, spotting and landing suspended loads, maneuvering drill pipe and all types of tubulars on pipe racks or the platform, snagging taglines and sling legs, etc. A strong fiber glass pole with a nylon head allows personnel to push and guide suspended loads to its final place, without taking them too close to the load to avoid a caught-between situation struck-by hazard. PSC LOAD-IT PSC Load-It Positioning Tool can be used for a multitude of jobs like an extension to move, push or reposition suspended items and equipment. Features. • S-head/ M-head interchangeable • Available lengths - 2ft, 4ft, 6ft, 8ft, 10ft

5. PSC HANDS-FREE SAFETY TOOLS PSC LOAD-IT MAG HEAD TOOL PSC Load-It Mag Head Tool (PSC-LIT-MAG-FG-008) is a 4 feet Fiberglass Pole with a Pivoting Magnet (Rated for #80 lbs.) to guide steel plates and steel structural products. This is an extendable telescopic pole that extends up to 8 feet long. It has a threaded locking mechanism which can be used to lock at any length until it gets unthreaded induced by a massive push load. PSC TAGLINE RETRIEVER TOOL The PSC Tagline Retriever Tool allows a worker to be at a much safer distance from the load when suspended. The rubber buffer in the tool works as a push/pull against suspended loads to guide them, especially when landing loads in tight or in congested spaces. PSC DRILL PIPE CONNECTION GUIDE This tool consists of two identical parts that clamp around the drill pipe when operated by two personnel. This provides maximum stability for the drill stand when engaging with the stand set in the rotary slips. Each part is fitted with wrist lanyards to reduce any risk of dropping the tool down the hole while also fitted with a quick disconnect device to prevent any risks to personnel limbs associated with rotating equipment. PSC TRT-3P EXTENDABLE SAFETY TOOL PSC TRT-3P Extendable Tagline Retriever Tool, when collapsed the safety tool is used to guide and manoeuvre suspended loads, pull slung loads, and push suspended loads to their final position without the need for hands to do it-making the operations safer. The inner aluminum pole allows the tool to be extended up to 12 feet to retrieve taglines without getting into the red zone under a suspended load.

6. PSC HANDS-FREE SAFETY TOOLS PSC TubularGuider PSC TubularGuider features non-slip grips, a locking mechanism and a super strong aluminum shaft. The dual release uses a spring-loaded noose release to extend the cable through the tool to release the tubular or the slide control which instantly drops the noose from the tool. The tool is available in 3 sizes: 36 inches, 48 inches and 60 inches long. PSC GASGRAB The tool can be used for lifting & moving gas cylinders. It is made from Die-Cast Aluminum and is planned to be light (2kg) and rigid without compromising its strength. The durable, warm-touch coating improves operator safety and comfort. PSC FINGERSAVER PSC FingerSaver keeps the hands away from the impact of the hammer on the flogging spanner and from pinch points. The FingerSaver offers support to the tool equivalent to that of hands and fingers, it is designed carefully and examined on typical applications by the users where large spanners and flogging spanners are used on nuts and bolts. PSC CHISEL AND PUNCH HOLDER PSC Chisel And Punch Holder Tool is ergonomically designed to provide a comfortable-firm grip, keeping in mind the problems and difficulties faced by the workers with the chisel application.

7. PSC HANDS-FREE SAFETY TOOLS PSC EZY LIFT PIPE LIFTING TOOL The PSC Ezy Lift Pipe Lifting Tool is designed to keep the wrist and hand in a neutral position and avoid strain. It helps to prevent pinched fingers and cuts from sharp surfaces with proper body positioning and lifting. PSC LIFT ASSIST MANUAL LIFTING AIDS A new range of PSC Hands‐Off policy tools (Lift Assist Manual Lifting Aids) prevents back pain problems from bending, and simultaneously improves ergonomics in workplace. It also reduces possible chances of hand and finger injuries associated with lifting and carrying the small equipment with bare hands. PSC HANDLE-TECH PIPE HANDLE The Handle-Tech Pipe Handle tool is a simple handle that could be locked onto any hose or pipe, enabling the worker to move the hose while standing in a more natural position, almost as easily as carrying a suitcase. PSC GUIDE-IT SET BACK TOOL PSC Guide-It Set Back Tool is a double U-shaped attachment, one forward facing and one rear facing to facilitate the stabilization of a suspended drill pipe of upto 5⅞ inches in a vertical position. Allowing easy exchange from a push / pull function, giving the user maximum control over the load.

8. PSC HANDS-FREE SAFETY TOOLS PSC GUIDE-IT LOAD HANDLING TOOL The V-shaped attachment of the tool engages with the corner of containers and baskets which allows a suspended load to be stabilized by exerting a pushing action. Its unique angled design acts as a locking mechanism providing the handler with maximum control over the suspended load. Also, it has an angled U- shaped attachment that facilitates the 4” inch-box iron frames of open baskets and power packs. PSC GUIDE-IT PIPE GRAB TOOL For use in the movement of a suspended larger pipe, drill tools, bulk hoses and BOP service lines, the 10” Pipe Grab Tool perfectly complements the existing use of taglines by providing exceptional control of the load and flexibility to the handler in the movement and landing of large diameter pipe. Contact Us Project Sales Corp 28, Founta Plaza, Suryabagh Visakhapatnam - 530020 Andhra Pradesh, INDIA. Product Support shivani@projectsalescorp.com info@projectsalescorp.com Shivani - +91- 9603166448 Satish - +91-988 5149 412 Customer Support Rep Ranga - +91-891 2564 393 Visit our website: www.pschandsfree.com