1 / 68

Source Basics

What they are and how to use them. Source Basics. Agenda. Types of sources CW Swept Signal Generator Block Diagrams Applications Specifications. Sources Generate Sine Waves. Voltage. Time. Frequency. Voltage. Spectrum Analyzer. Oscilloscope.

prue
Download Presentation

Source Basics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. What they are and how to use them Source Basics

  2. Agenda • Types of sources • CW • Swept • Signal Generator • Block Diagrams • Applications • Specifications

  3. Sources Generate Sine Waves Voltage Time Frequency Voltage Spectrum Analyzer Oscilloscope This is the ideal output: most specs deal with deviations from the ideal and adding modulation to a sine wave Millimeter RF Microwave 3-6 GHz 20-30 GHz 300 GHz

  4. Types of Sources • CW • generates a single frequency, fixed sine wave • Swept • sweeps over a range of frequencies • may be phase continuous • Signal Generator • adds modulation • produces "real world" signal

  5. Agenda • Types of sources • CW • Swept • Signal Generator • Block Diagrams • Applications • Specifications

  6. t + t f _ cal aging CW f CW t aging t cal + _ Accuracy = 152 Hz CW Source Specifications ...Frequency . • Range: Range of frequencies covered by the source • Resolution: Smallest frequency increment. • Accuracy: How accurately can the source frequency be set. EXAMPLE Accuracy = = CW frequency = 1 GHz = aging rate = 0.152ppm/year = time since last calibrated = 1 year * * Uncertainty Voltage Frequency

  7. CW Source Specifications ...Amplitude • Range (-136dBm to +13dBm) • Accuracy (+/- 0.5dB) • Resolution (0.02dB) • Switching Speed (25ms) • Reverse Power Protection Source protected from accidental transmission from DUT What is P out? How accurate is this number? max DUT Voltage What is P out? min Frequency

  8. CW Source Specifications ...Spectral Purity • Phase Noise • Residual FM • Spurious CW output residual FM is the integrated phase noise over 300 Hz - 3 kHz BW harmonic spur ~30dBc phase noise non-harmonic spur ~65dBc sub-harmonics 0.5f0 f0 2f0

  9. CW output measured as dBc/Hz Power Spectral Density -104.177 dB* Ch1 PM PSD TRACE A: frequency A Marker 10 000 Hz Y* = radrms^2/Hz -75 dB* LogMag 5 dB /div -125 dB* Start: 500 Hz Stop: 100 kHz 1k 10k 100k CW Source Specifications ... Spectral Purity: Phase Noise

  10. CW Block Diagram Synthesizer Section • range • resolution • switching speed • spectral purity Output Section • range • level accuracy • amplitude switching speed • reverse power protection Reference Section • frequency stability • accuracy

  11. RF CW Block Diagram Synthesizer Section Frac-N Output Section Output Attenuator ALC Modulator f Phase Detector VCO ALC Driver divide by X Reference Oscillator ALC Detector Reference Section ALC = automatic level control

  12. divide by X TCXO OCXO Aging Rate +/- 2ppm/year +/- 0.1 ppm /year Temperature +/- 1ppm/year +/- 0.01 ppm/year Line Voltage +/- 0.5ppm/year +/- 0.001 ppm/year RF CW Block Diagram Reference Section to synthesizer section f Phase Detector Optional External Reference Input Reference Oscillator (TCXO or OCXO)

  13. f RF CW Block Diagram Synthesizer Section ...produces accurate, clean signals N = 93.1 control Frac-N 5MHz to output section X 2 Phase Detector 931 MHz VCO multiplier 5MHz 465.6 MHz from reference section

  14. noise frequency RF CW Block Diagram Synthesizer Section PLL / Fractional - N ...suppresses phase noise phase noise of source phase-locked-loop (PLL) bandwidth selected for optimum noise performance reference oscillator phase detector noise 20logN broadband noise floor VCO noise

  15. Output Attenuator ALC Modulator from synthesizer section source output ALC Driver ALC Detector RF CW Block Diagram Output Section • ALC • maintains output power by adding/subtracting power as needed • Output Attenuator • mechanical or electronic • provides attentuation to achieve wide output range (e.g. -136dBm to +13dBm) ALC = automatic level control

  16. Output Attenuator ALC Modulator ALC Driver mWave CW Block Diagram Reference Section Frac N f Phase Det VCO Sampler by X Ref Osc YIG Oscillator f Phase Detector Tuning Coils Frac-N Synthesizer Section ALC Detector f Phase Detector Output Section VCO

  17. mWave CW Block Diagram Reference Section Frac-N 300 - 350 MHz f Phase Detector to synthesizer section VCO 30 MHz 10 MHz multiply by X f x3 Reference Oscillator Ext Ref

  18. n = 29 then f = 8.99 GHz and f = 20 MHz LO divide by x IF mWave CW Block Diagram Synthesizer Section Sampler from reference section IF 9.01 GHz f Phase Detector Tuning Coils YIG Oscillator Frac N divide by y f Phase Detector VCO from reference section

  19. mWave CW Block Diagram Synthesizer Section Comb Generator Sampler mixes one of the harmonics with the output of the YIG oscillator 310 MHz 8.99 GHz 27 28 29 30 31 n = 1 2 3 4 5 frequency

  20. Applications & Critical Specifications • Local Oscillator • phase noise • frequency accuracy • Amplifier Distortion • spurious • TOI (for system) • Receiver Testing • Spurious • spurious • level accuracy

  21. IF signal transmitter output Applications & Critical Specifications As a Local Oscillator DUT poor phase noise spreads energy into adjacent channels poor frequency accuracy will cause transmitter to be at the wrong frequency

  22. f1 DUT output RF f2 isolator f1 f2 test system third order products will also fall here amplitude spurious signals from source can corrupt measurement fL = 2f1 - f2 fU = 2f2 - f1 frequency Applications & Critical Specifications Amplifier Testing Intermodulation Distortion

  23. in-channel signal (modulated signal) IF signal out-of-channel signal (CW or modulated signal) DUT source output IF Rejection Curve spur from source and/or high levels of phase noise can cause a good receiver to fail Level (dBm) Frequency Applications & Critical Specifications Receiver Testing Spurious Immunity

  24. Agenda • Types of sources • CW • Swept • Signal Generator • Block Diagrams • Applications • Specifications

  25. Sweeper Specifications ...Frequency • ramp sweep • accuracy • sweep time • resolution f2 frequency f1 t2 t1 time • step sweep • accuracy • number of points • switching time f4 f3 frequency f2 f1 t1 t2 t3 t4

  26. level accuracy spec power flatness spec f1 f2 frequency } P2 power sweep range power P1 Sweeper Specifications ...Amplitude Frequency Sweep • Level Accuracy • Flatness Source Match (SWR) Power Sweep • Power Sweep Range Power Slope Range • Source Match (SWR)

  27. from reference section Sampler 9.01 GHz divide by x f YIG Oscillator Phase Detector Tuning Coils S/H divide by y DAC Sweeper Block Diagram Frequency Sweep: Open Loop • Phase continuous • PLL open • Synthesize start frequencies • Tuning characteristics must be precisely known mWave Source: Synthesizer Section

  28. Frac-N f Phase Detector VCO Sweeper Block Diagram Frequency Sweep: Closed Loop • Fully synthesized sweep • Phase continuous within • PLL never loses lock • Limited frequency range RF Source: Synthesizer Section

  29. Output Attenuator ALC Modulator from synthesizer section source output ALC Driver ALC Detector Sweeper Block Diagram Power Sweep • Drive ALC Modulator • Level accuracy maintained • Broad sweeps may require switching output attentuator Output Section

  30. Applications & Critical Specifications • Frequency Response • Frequency Accuracy • Output Power (Level) Accuracy • Flatness • Speed • residual FM • Amplifier Compression • Power Range

  31. Applications & Critical Specifications Frequency Response Testing Sweeper Input • Frequency Accuracy • Output Power (Level) Accuracy • Flatness • Speed • residual FM LO

  32. Log Mag 5.0 dB/ Ref -15.00 dB 1:Transmission BW: 429.600 MHz CF: 2405.782 MHz 5 dB Q: 5.60 Loss: -0.84 dB 1 0 -5 3 5 6 -10 Ch1 -20 -25 -30 1 -35 Abs Center 2 450.212 MHz Span 1 099.577 MHz Applications & Critical Specifications Frequency Response Testing Who Cares About Accuracy?

  33. 1 dB compression point Power Out Power In Applications & Critical Specifications Amplifier Compression • Power Range The 1 dB compression point is a common amplifier specification used to identify the linear operating range of an amplifier. Power sweep is available on some HP sources.

  34. Agenda • Types of sources • CW • Swept • Signal Generator • Block Diagrams • Applications • Specifications

  35. Signal Generators • Calibrated, variable frequency over a broad range • Calibrated, variable ouput level over a wide dynamic range • Calibrated modulation • Analog (AM, FM, PM, Pulse) • Digital (IQ) • Format Specific

  36. Modulation ...Where the information resides p f V= V(t) sin[2 f(t) + (t)] AM, Pulse PM FM q V= V(t) sin[ (t)]

  37. Modulation: Analog Amplitude Modulation Carrier Important Signal Generator Specs for Amplitude Modulation Voltage Time • Modulation frequency • Linear AM • Log AM • Depth of modulation (Mod Index) Modulation

  38. p V= V(t) sin[2 f t + m(t)] b c F /F Important Signal Generator Specs for Frequency Modulation b = D dev mod Voltage Time Modulation: Analog Frequency Modulation • Frequency Deviation • Modulation Frequency • dcFM • Accuracy • Resolution

  39. p V= V(t) sin[2 f t + m(t)] b c Important Signal Generator Specs for Phase Modulation • Phase deviation • Rates • Accuracy • Resolution Voltage Time Modulation: Analog Phase Modulation b = Df peak

  40. p V= V(t) sin[2 f t + m(t)] b c b = Df peak F /F b = D dev mod Modulation: Analog PM is Really the Same as FM... FM Modulator PM Modulator

  41. Modulation: Analog Voltages of FM/PM Frequency Components Bessel Functions of the First Kind 1 J0 0.8 J1 0.6 J2 J3 0.4 J4 0.2 J5 0 J6 -0.2 J7 -0.4 J8 J9 -0.6 0.0 2.0 4.0 6.0 8.0 9.9 J10 b 5.52

  42. Important Signal Generator Specs for Pulse Modulation • Pulse width • Pulse period • On/Off ratio • Rise time Modulation: Analog Pulse Modulation T Rate=1/T Rise time On/Off ratio Power t Time Pulse Width 1/T 1/t Power

  43. f Signal Generator Block Diagram FM and PM control Frac-N to output section X 2 Phase Detector VCO multiplier d/dt divide by X function generator from reference section external FM/PM input

  44. Signal Generator Block Diagram AM and Pulse ALC Modulator Burst Modulator Output Attenuator from synthesizer section source output Burst Mod Driver ALC Driver function generator ALC Detector Ext AM ALC Hold Ext Pulse

  45. Digital Modulation ...signal characteristics to modify Amplitude Frequency Phase Both Amplitude and Phase

  46. f p V= V(t) sin[2 ft + ] Digital Modulation ...Amplitude Shift Keying (ASK) V(t) = RF waveform V =

  47. p f V= Vo sin[2 ft + (t)] f 1 f 2 Digital Modulation ...Phase Shift Keying (BPSK) f (t) =

  48. p f V= Vo sin[2 ft + (t)] f p 1 = 3 /4 f (t) = f p 2 = /4 f p 3 = - /4 f p 4 = - 3 /4 Digital Modulation ...Phase Shift Keying (QPSK)

  49. f Digital Modulation PSK Implementation: PLL Method Frac-N Phase Detector VCO f(t) d/dt Reference Oscillator external modulation input

  50. p f V= Vo sin[2 ft + (t)] p f = Vo cos[ (t)] sin[2 ft] + p p f Vo sin[ (t)] sin[2 ft + /2] f p 1 = 3 /4 f (t) = f p 2 = /4 f p 3 = - /4 f p 4 = - 3 /4 Digital Modulation PSK Implementation: IQ Method

More Related