Download
fire rated hurricane fr n.
Skip this Video
Loading SlideShow in 5 Seconds..
Fire Rated Hurricane - FR - ProfireWA PowerPoint Presentation
Download Presentation
Fire Rated Hurricane - FR - ProfireWA

Fire Rated Hurricane - FR - ProfireWA

35 Views Download Presentation
Download Presentation

Fire Rated Hurricane - FR - ProfireWA

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Fire Rated Hurricane (FR) http://www.profirewa.com.au/

  2. For over 25 years, the Hurricane® range vertical vane™ natural ventilation technology has been built to endure the tough climatic conditions and operating environments. Edmonds ventilation products are designed, engineered and manufactured at its ISO9001 accredited facility in Seven Hills, Australia. Hurricane was the first industrial ventilator to incorporate vertical vane design which tests at University of Technology Sydney have shown to be have an improved co-efficient of discharge (Cd) compared to similar sized traditional spherical vents. ​ Hurricane range of Special Variations ventilators such as fire rated (FR) ventilator provides continuous ventilation and smoke release capability in the event of a fire. It has been tested by CSIRO and meets the fire resistant test to AS 1668.1-1998. The use of ventilation and air conditioning in buildings, Part 1: Fire and smoke control in multi-compartment buildings Section 4.8. Smoke-Spill fan. The operation of FR also does not interfere with Early Suppression Fast Response sprinkler systems.

  3. Features and Benefits 1- Advantages versus traditional pneumatically released ventilators include both constant ventilation and smoke release capacity, which will be boosted by the buoyancy effect of rising hot air 2- Does not interfere with Early Suppression Fast Response sprinkler systems 3- Responsive reaction to smoke emission 4- Meets the fire resistant test to AS 1668.1-1998. The use of ventilation and air conditioning in buildings, Part 1: Fire and smoke control in multi-compartment buildings Section 4.8. Smoke-Spill fan 5- Unique, in-house Australian designed glass reinforced polyphenylene sulphide use in critical components to provide resistance to chemical and thermal attacks 6- Specially designed and machined shaft to cater for metal expansion due to heat 7- Uniquely formulated bearing grease, to Edmonds’ specification, for potential high-heat application 8- Improved co-efficient of discharge (Cd) compared to similar sized traditional spherical vents 9- Lightweight design entails crane-life might not be necessary thus reducing overall installation cost 10- Variable pitch throat design can adapt to most roof angles 11- Higher flow coefficients than comparable sized traditional spherical vents 12- Design and tested to Australian Standards AS4740 13- Available in 900mm throat sizes only 14- Mill finish or power coated option to match most Colorbond® colours

  4. Colour Selections 1- Available in mill (uncoated aluminium) and 28 colours: ​ Specification Hurricane FR Roof mounted ventilators shall be Hurricane® Fire Rated 900mm (model FR 900) vertical vanes ventilators and shall be manufactured from non-combustible material. The ventilators shall be tested by the CSIRO to meet AS1668.1-1998 Section 4.8 and shall have the ability to operate for 120 minutes at 200°C and 30 minutes at 300°C or longer. The ventilator tops shall be mill finished or powder coated with Colorbond® or as specified by the customer at time of confirmation. ​ The ventilator shall be weather-tight under proper installation and normal operating conditions, and capable of withstanding a wind speed of 205.2km/hr as tested by CSIRO. The ventilator shall be manufactured by CSR Edmonds® of New South Wales (1800 332 332) including applicable bases, dampers, fixings, trims, straps, flashings and other specified fittings manufactured by CSR Edmonds® as specified herein, or equivalent.

  5. 15 year mechanical performance warranty on turbine/ 2 years for Accessories, until product is subjected to fire conditions. Please refer to warranty document for full details.

  6. Contact Us For more information about services of Profire WA, Visit here: http://www.profirewa.com.au/ Or you may contact Address: 71 Brant Road Kelmscott, Perth, WA 6111 Phone no: 08 9497 4446 Email: jessica@profirewa.com.au

  7. Thank You!!!