1 / 27

Heating, Ventilation and Air- Conditioning (HVAC) Part 4:

Supplementary Training Modules on Good Manufacturing Practice. Heating, Ventilation and Air- Conditioning (HVAC) Part 4: Commissioning, qualification and maintenance. WHO Technical Report Series, No. 961, 2011. Annex 5. Section 8. HVAC. Objectives To understand key issues in

powelldavid
Download Presentation

Heating, Ventilation and Air- Conditioning (HVAC) Part 4:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Supplementary Training Modules on Good Manufacturing Practice Heating, Ventilation and Air- Conditioning (HVAC) Part 4: Commissioning, qualification and maintenance WHO Technical Report Series, No. 961, 2011. Annex 5 Section 8

  2. HVAC Objectives • To understand key issues in commissioning, qualification and maintenance of HVAC systems 8.

  3. HVAC Documentation requirements to assist in commissioning, qualification and maintenance • Description of design, installation and functions • Specifications, requirements • Manuals • Operating procedures • Instructions for performance control, monitoring and records • Maintenance instructions and records • Training of personnel • programme and records

  4. HVAC Commissioning Commissioning (is integrated in qualification) and includes: • Setting up, balancing, adjustment and testing of entire HVAC system • It helps to ensure it meets URS and capacity • Acceptable tolerances for parameters set before commissioning • Precursor to qualification 8.1.1, 8.1.4, 8.1.6

  5. HVAC Commissioning (2) Records and data include: • Installation records – documented evidence of measured capacities of the system • Acceptance criteria set for system parameters • Training of personnel (e.g. operation and maintenance) • O&M manuals, schematic drawings, protocols, reports 8.1.2, 8.1.3, 8.1.5

  6. HVAC Qualification • Validation is an extensive exercise • Qualification of the HVAC system is one component in the overall approach that covers premises, systems/utilities, equipment, processes, etc. • Risk-based approach for HVAC qualification • See also full guidelines on "Validation" in WHO TRS No 937, 2005, Annex 4. 8.2.1

  7. HVAC Qualification • Described in a Validation Master Plan (VMP) • Reflects the nature and extent, test procedures, and protocols • DQ, IQ, OQ, and PQ • Risk analysis to determine critical and non-critical parameters, components, subsystems and controls 8.2.2 - 8.2.5

  8. HVAC Qualification • Direct impact components and critical parameters should be included • Non-critical systems and components are subjected to Good Engineering Practices (GEP) • Acceptance criteria and limits defined in design stage • Design conditions, normal operating ranges, operating ranges, alert and action limits 8.2.6 - 8.2.11

  9. HVAC • Design conditions and normal operating ranges set to achievable limits • OOL results recorded and investigated 8.2.10 – 8.2.12

  10. HVAC Qualification – examples of aspects to consider • DQ – Design of the system, URS • (e.g. components, type of air treatment needed, materials of construction) • IQ – Verify installation • e.g. relevant components, ducting, filters, controls, monitors, sensors, etc. • includes calibration where relevant

  11. HVAC Qualification Typical parameters to be included in qualification (based on risk assessment): • Temperature • Relative humidity • Supply, return and exhaust air quantities • Room air change rates • Room pressures (pressure differentials) 8.2.13

  12. HVAC Qualification Typical parameters to be included in qualification (based on risk assessment) (2): • Room air flow patterns • Room clean-up rate • Particulate matter, microbial matter (viable and non-viable) • HEPA filter penetration tests • Containment system velocity • Warning/alarm systems 8.2.13.

  13. HVAC Conduct of the tests: • Time intervals and procedure to be defined by the manufacturer - based on risk assessment (influenced by the type of facility and level of protection) • See also ISO 14644 for procedures • Requalification, and change control • Documents: system airflow schematics, room pressure cascade drawings, zone concept drawings, air-handling system allocation drawings, particle count mapping drawings 8.2.14 – 8.2.18

  14. HVAC Qualification • Tests performed according to protocols and procedures for the tests • Results recorded and presented in report (source data kept) • Traceability, e.g. devices and standards used, calibration records; and conditions specified

  15. HVAC Schedule of tests to demonstrate continuing compliance *Test procedure as per ISO 14644 8. Table 3

  16. HVAC Recommended optional strategic tests *Test procedure as per ISO 14644 8. Table 3

  17. Cleanroom monitoring program (1) HVAC • Routine monitoring program as part of quality assurance • Additional monitoring and triggers, e.g. 1.Shutdown 2.Replacement of filter elements 3.Maintenance of air-handling systems 4. Exceeding of established limits

  18. Cleanroom monitoring programme (2)Particles and Microbiological contaminants HVAC • Number of points/locations for monitoring determined, specified, documented in procedure and or protocol • Sufficient time for exposure, and suitable sample size • Identification and marking of sampling points • Definition of transport, storage, and incubation conditions • Results to reflect the procedure/protocol followed • Define alert and action limits as a function ofcleanliness zone/class See also ISO 14644

  19. HVAC Cleanrooms should be monitored for microorganismsand particles Example of a sampling points

  20. Qualification – examples of aspects to consider in qualification (OQ, PQ) Test Uni-directional airflow / LAF Turbulent / mixed airflow Description Differential pressure on filters 2 2 1 := As built (ideally used to perform IQ) 2 = At rest (ideally used to perform OQ) 3 = Operational (ideally used to perform PQ) Room differential pressure N/A 2, 3 Airflow velocity / uniformity 2, 3 Optional Airflow volume / rate 2 2 Parallelism 2 N/A Airflow pattern 2 3 HVAC

  21. HVAC Maintenance • Procedure, programme and records for planned, preventative maintenance • e.g. cleaning of filters, calibration of devices • Keep O&M manuals, drawings etc. • Appropriate training for personnel • Change of HEPA filters by suitably trained persons • Impact of maintenance on: • Product quality and Qualification 8.3.1 – 8.3.6

  22. HVAC Premises may influence HVAC design / performance. Therefore consider: • Adequate airlocks, change rooms, passages • Required pressure cascades • Detailed diagrams available with pressure cascades, air flow directions and flow routes for personnel and materials should be prepared and maintained; • Change room classification 9

  23. HVAC Inspecting the air-handling system • Verification of design documentation, including • description of installation and functions • specification of the requirements • Operating procedures • Maintenance instructions • Maintenance records • Training logs • Environmental records • Discussion on actions if OOS values • On site verification (walking around the site)

  24. HVAC Take home message. What is essential? • Appropriate design of AHUs and HVAC system • Correct components, and MOC • Ensuring appropriate cleanliness of air, environmental conditions (e.g. temperature and RH), and area classification to prevent contamination and cross-contamination • Qualification data to support claims • Regular calibration, maintenance and cleaning

  25. HVAC Conclusion Air-handling systems: • Play a major role in the quality of pharmaceuticals • Should be designed properly, by professionals • Should be treated as a critical system

  26. HVAC Group Session

  27. HVAC Group Session – modified layout MAL = Material Air Lock PAL = Personnel Air Lock

More Related