1 / 26

Training Program Entry/Exit

Training Program Entry/Exit. Click on the “green arrow” button to enter training program and advance to next slide.

polito
Download Presentation

Training Program Entry/Exit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Training Program Entry/Exit Click on the “green arrow” button to enter training program and advance to next slide. To end training presentation and move to the self-testing portion of this training, click on the “STOP” button and then click on “BACK” arrow browser key located in the TOP LEFT OF THE SCREEN. This will take you back to the program testing page. STOP

  2. Your Rural Electric Cooperative Emergency Action Planand Fire Prevention Plan

  3. THE PURPOSE OF THE PLAN • To protect all REMC employees and guests from serious injury, property loss or loss of life which may occur in the event of a disaster. • Disasters include, but are not limited to: fires, tornadoes, blizzards, earthquakes, bomb threats and chemical releases.

  4. If an emergency happened in your workplace right now, would you know what to do or where to go? Disasters are always unexpected events demanding fast decisions and quick actions. Although the possibility of such an emergency is remote, advanced planning and training is required to ensure the orderly and safe evacuation of all endangered persons when necessary. SITUATION:

  5. THE PLAN • Your REMC Plan applies to all emergency action and fire prevention plans required by the Occupational Safety and Health Administration (OSHA) standards and covers required actions that REMC employees must take to ensure the safety of our employees and guests from fire and other emergencies.

  6. TRAINING • OSHA requires employees to be trained on the Emergency Action Plan upon employment and whenever the Plan is changed.

  7. FIRE PREVENTION • If you discover a fire: Call (9) 9-1-1 • Notify co-workers! Sound the alarm if available. • Immediately get out of the building and proceed to the exterior assembly area. • REMC employees should only attempt to fight small fires with appropriate fire extinguishers. If you fight a fire, make sure you have a clear path to exit. Always call (9) 9-1-1 first!

  8. PORTABLE FIRE EXTINGUISHERS This slide indicates the type of extinguishers and what kind of fires they are to be used on. TYPEUSED FOR FIRESINVOLVING: A Ordinary Combustibles (Wood, Paper, Cloth, etc.) B Flammable Liquids (Grease, Gas, Paints, Oils, etc.) C Electrical (Energized Motors, Switches, etc.)

  9. HOW TO USE A PORTABLE FIRE EXTINGUISHER • PULL/AIM/SQUEEZE/SWEEP: • P ULL THE PIN • A IM AT THE BASE OF FIRE • S QUEEZE THE TRIGGER • S WEEP

  10. COMMON (PREVENTABLE) CAUSES OF FIRE • Overloading circuits, unsafe wiring, defective extension cords - #1 Cause. • Appliances such as coffee makers and space heaters left on when not in use or come into contact with combustibles. • Smoking – not using an ash tray • Improper use, handling of flammable materials. • Poor housekeeping, i.e., oil soaked rags

  11. Fire Extinguisher Locations • Fire extinguishers are located throughout the REMC owned buildings and available on most vehicles. • Fire extinguisher are serviced annually and inspected monthly to assure they are in proper working order.

  12. TORNADO • Seek shelter in the REMC designated tornado assembly area. This is usually located in the REMC vault or in an interior room away from windows. See your REMC evacuation diagram for details.

  13. TORNADO • If you are caught outdoors and a tornado is sighted find a ditch or low ground. Lie flat, face down and use your hands to protect your head. • Do not stay in your vehicle or take shelter under a bridge. • Did you know, Fulton County REMC in Rochester, Indiana has been struck by a tornado three times ! Other Indiana REMC’s have also suffered direct hits.

  14. BOMB THREATS • The most common bomb threat is by telephone. • Obtain as much information as possible. • Follow the Bomb Threat Checklist located in the Appendix of the Plan. • Do NOT hang up your phone (a trace may be possible). • Immediately notify your supervisor and call (9) 9-1-1. • All employees shall evacuate the building until law enforcement authorities give the ok to return back to work.

  15. LIGHTNING SAFETY RULES • Where possible, find shelter in a building or in a fully enclosed vehicle. • Avoid water, open spaces and metal objects. • Unsafe locations include underneath canopies, picnic shelters or near trees.

  16. CRITICAL ACTION PROCEDURES • Employees must be sure that they know what is expected of them in all such emergency possibilities.

  17. ALARM SYSTEM • Some alarm systems are activated automatically through detection devices and/or manually. • If a mechanical alarm is not available, employees are to provide verbal alarm procedures to provide warning.

  18. EMERGENCY COMMUNICATION • All emergencies should be reported immediately to: (9) 9-1-1, or other agencies whose numbers are listed in the Appendix of the Written Plan. • Key individuals within the workplace have been designated as having authority to address emergencies and release of information (e.g., Control Committee).

  19. THE EMERGENCY CONTROL COMMITTEE • The responsibilities of the committee are to be implemented whenever there is an emergency. Examples of the duties of the committee include: • Assess nature and extent of the emergency • Assume control of all emergency actions • Assign tasks to personnel in carrying out specific actions (shutting off utilities, head count, etc…) • Order evacuation, if deemed necessary, and • Take other appropriate actions necessary to protect life

  20. MEANS OF EGRESS • Emergency Evacuation Diagrams are posted in each office location and clearly show the egress (emergency evacuation) routes required.

  21. ASSEMBLY AREAS • In an emergency, everyone must go to the designated assembly area. All employees must know where the assembly area is located and meet there immediately upon an emergency.

  22. ASSEMBLY AREA • During an evacuation it is important that you report to the designated meeting point. • A member of the Emergency Control Committee will perform a roll call to make sure everyone is accounted for.

  23. MEDICAL DUTIES • Employees trained in First-Aid and CPR are encouraged to provide assistance in emergency and rescue situations that may occur in the workplace. All trained employees should know where their Bloodborne and First-Aid Kits are located.

  24. RETURN TO WORK • When the Emergency Control Committee or Law Enforcement give the all clear, employees may return to the building.

  25. Program Summary • Emergencies can happen at any time. Employees and Management must be prepared to act and understand the general protocols to follow to protect themselves. • Review your location’s written plan for system specific information. • References • Title 29 Code of Federal Regulations, Part 1910 • National Fire Protection Association (NFPA)

  26. If you are comfortable with the material just presented… • Move to the self-testing portion of this training by: • 1) moving to the beginning of the presentation by clicking on the green arrow buttonlocated in bottom left of this page. • 2) follow the instruction on the Training Program Entry/Exit slide. • If you would like to review the training slides, click the yellow “Review” button to move back to the first training slide. Review

More Related