1 / 3

TMP112 Calibration

TMP112 Calibration. Slope 1 (Max). Slope 3 (Max). Slope 2 (Max). The slope regions below were created from characterization data. We assure that if a device has positive temperature error it will have a slope no greater than the maximum slope in each temperature region.

philip-solis
Download Presentation

TMP112 Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TMP112 Calibration

  2. Slope 1 (Max) Slope 3 (Max) Slope 2 (Max) • The slope regions below were created from characterization data. We assure that if a device has positive temperature error it will have a slope no greater than the maximum slope in each temperature region. • We assure that if a device has negative temperature error it will have a slope no less than the minimum slope in each temperature region.The more negative the temperature error the flatter the slope across temperature. Slope 2 (Min) Slope 3 (Min) Slope 1 (Min)

  3. If a device has the maximum slopes across temperature than calibrating at T = 25oC will improve the temperature error across temperature. This is shown below. Device 1 before calibration Device 1 after calibration

More Related