1 / 51

TCOM 540

TCOM 540. Session 5. Agenda. Quiz Review Session 3 assignments Access and backbone design. Access and Backbone. We already encountered access and backbone in the first session To over-simplify, access lines provide local connectivity, backbone provides long-distance transport

penda
Download Presentation

TCOM 540

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. TCOM 540 Session 5 TCOM 540/1

  2. Agenda • Quiz • Review Session 3 assignments • Access and backbone design TCOM 540/1

  3. Access and Backbone • We already encountered access and backbone in the first session • To over-simplify, access lines provide local connectivity, backbone provides long-distance transport • Balance between access and backbone costs can vary widely TCOM 540/1

  4. Access and Backbone (2) Backbone Access TCOM 540/1

  5. Access and Backbone (3) IXC1 Backbone IXC1 POP LEC Central Office IXC2 Backbone Access lines to IXCs IXC2 POP Local Loops To other LEC COs (often SONET ring) TCOM 540/1

  6. Redundancy IXC1 POP2 LEC CO2 IXC1 Backbone Your Site IXC2 POP LEC Central Office1 Access lines to IXCs IXC2 POP Local Loops To other LEC COs IXC2 Backbone TCOM 540/1

  7. Local Access Costs Are Significant • Relative cost of local access has been increasing Source: Bureau of Labor Statistics TCOM 540/1

  8. Local Access Costs Are Significant (2) • Situation regarding dedicated local access is less clear • Accurate information regarding real prices paid for dedicated access circuits is not easy to find • Probably has been some decrease, at least in areas where there is local access competition TCOM 540/1

  9. Local Access Costs Are Significant (3) • The Telecommunications Reform Act of 1996 was supposed (among other things) to foster local competition • Appears to have been relatively unsuccessful • Competitive Local Access Carriers (CLECs) have been decimated by collapse of high-tech stocks • Relatively little facilities-based local competition (< 10% of market) – but this fraction is increasing TCOM 540/1

  10. Local Access Costs Are Significant (4) • Appears that whatever competition there is for at least residential local access (high speed) is coming from satellite and cable, not CLECs • Legislative action? TCOM 540/1

  11. Local Access Design Example Traffic (symmetric) (Note: Site 1 is hub) Costs (symmetric) TCOM 540/1

  12. Local Access Design Example (2) • Use some nodes as concentrators 6 6 6 1526 2 2 2 1225 1327 $1629 1225 7 7 7 $2112 $1929 1929 1629 1 1 1 5 5 5 667 $667 667 $1328 1328 1328 4 4 4 $1985 1985 1483 3 3 3 $9650 $8660 $7659 (OPTIMAL) TCOM 540/1

  13. Local Access Design Example (3) • If traffic grows by 50%, links (1,4) and (1,7) must be doubled 6 6 2 1327 2 1225 1327 7 1929 7 1629 IMPROVEMENT 3258 1 5 1 667 5 1328 667 2656 4 4 1985 1483 3 $8865 (OPTIMAL) 3 $10616 TCOM 540/1

  14. Frame Relay (FR) • Frame Relay Permanent Virtual Circuits (PVCs) use concepts of Committed Information Rate (CIR) and Port Speed • Charges for • Access • Port (connection to network) • CIR of PVC – does not vary with distance TCOM 540/1

  15. Asynchronous Transfer Mode (ATM) • ATM uses similar concepts to FR • Constant Bit Rate (CBR) • Variable Bit Rate non-real-time (VBR-nrt) • Variable Bit Rate real-time (VBR-rt) • Available Bit Rate (ABR) • Unspecified Bit Rate (UBR) TCOM 540/1

  16. ATM Definitions Constant Bit Rate (CBR) - fixed bit rate in which bits are sent in a steady stream. A CBR is useful for applications requiring small but near constant transmission, for example, remote-site monitoring. Variable Bit Rate (VBR) - while overall transmission capacity (bits per second) is guaranteed, the rate at any given second may not equal the stated capacity. A VBR of 28 Kb/s, for example, may have periods where the transmission rate ranges from 23 to 33 Kb/s. VBR(rt) means a variable bit rate in real time transmission; VBR(nrt) means a variable bit rate transmission in near-real-time conditions. Both are used in voice and videoconferencing, where a quality channel is reserved but over which data does not flow evenly. Unspecified Bit Rate (UBR) - a transmission service which does not guarantee a fixed transmission capacity. Any application that can tolerate delays is ideally satisfied by an UBR. Source: BCE Teleglobe TCOM 540/1

  17. ATM Definitions (2) Available Bit Rate (ABR) -The bit rate left after the predictive and guaranteed service traffic (CBR/VBR) is served. In essence, it is simply a fair share of the remaining bandwidth amongst the VPs and VCs that have asked for this service. Source: cell-relay.indiana.edu TCOM 540/1

  18. Rules of Thumb • Cannot choose between a leased line and a FR/ATM design until both are done and costs compared • Availability of FR and ATM just complicates life … • Note that leased lines may have security advantages TCOM 540/1

  19. Rules of Thumb (2) • If sites vary widely in size (traffic originated/terminated), choose the bigger sites as aggregation points • Define weight of a node as sum of all traffic flowing into and out of it • Design problem then has two parts • Access – gets traffic from small sites to backbone • Backbone – carries traffic between backbone nodes • Which comes first?? TCOM 540/1

  20. Traffic Scale • Depends on relationship of node size to smallest desired link size • Smallest link size determined by factors such as packet size/delay • Traffic from access node much smaller than smallest link we wish to use - Create access trees to group sites efficiently - Capacitated spanning trees TCOM 540/1

  21. Traffic Scale (2) • Traffic from access node comparable to smallest link - Low speed link to hub vs. concentrator part way to hub - Concentrator placement problem • Traffic from access node significantly larger than smallest link - Multiple lower speed links vs. single higher speed link TCOM 540/1

  22. One Speed, One Center • Example problem with 20 nodes – one of which is the hub • 1200 bps/node, 9600 bps links, utilization 50% • What algorithm to use? TCOM 540/1

  23. One Speed, One Center (2) • Star design costs $26,358 • Link utilization 12.5% • MST cost $18,730 • Uses multiple (up to 4) links on some legs • Prim-Dijkstra tree cost $15,930 • Using a = 0.3 • Hundreds of designs tested TCOM 540/1

  24. One Speed, One Center (3) • For n nodes, there are nn-2 different spanning trees • 2018 = 2.621 * 1023 • This is a rather large number … • And partitioning does not help much • Groups of 4 can be done in 2.546 * 1010 ways • Not to mention groups of 3 etc., etc., etc. TCOM 540/1

  25. Esau-Williams Algorithm • Esau-Williams creates a Capacitated Minimum Spanning Tree (CMST) • Given a central node N0 and a set of other nodes (N1, N2, … Nn), and a set of weights (w1, …, wn) for each node, the capacity of a link W, and a cost matrix Cost(i,j) find a set of trees T1, …, Tk such that each Ni belongs to exactly one Tj and each Tj contains N0 and Si eTj wi < W StreesS l eLinks Cost(end1l, end2l) is a minimum TCOM 540/1

  26. Esau-Williams Algorithm (2) • Central concept is tradeoff function • Build “good” trees • Each tree starts off as one node • Component (graph theory meaning) Comp(Ni) • Tradeoff function is Tr() where Tr(Ni) = minj[Cost(Ni,Nj)] –Cost (Comp(Ni),N0) • Computes cost of linking to neighbor vs. cost of going to center TCOM 540/1

  27. Esau-Williams Algorithm (2) • Negative value of Tr means it is preferable to link to neighbor tree rather than running a link to the center • Must check that the design is feasible – i.e., does not exceed link capacity: W(Comp(Ni)) +W(Comp(Nj)) < W • Algorithm limitation – often desirable to increase link capacities in real life TCOM 540/1

  28. Esau-Williams Algorithm (3) N4 N2 N3 N1 Scanning node N3: 1. Examine costs of these links 2. Compare with cost of this link N0 TCOM 540/1

  29. Heaps • Code for implementing Esau-Williams in Cahn uses heaps (not essential, but interesting) • A heap is a special type of binary tree • Binary tree: each node has at most 3 edges • Parent • Left child • Right child TCOM 540/1

  30. Heaps (2) • Heap • Root at level 0 – smallest element • Any node has a value no larger than either of its children • Heaps are not unique TCOM 540/1

  31. Heaps (3) -1000 -700 -400 -200 -100 0 TCOM 540/1

  32. Heaps (3) -1000 -1000 -700 -400 -700 -100 -200 -100 0 -200 -400 0 TCOM 540/1

  33. Esau-Williams Implementation • Uses a heap for each node nHeap(i) and a global heap tHeap • Heap for a node has tradeoff values with respect to neighbors • Subject to feasibility TCOM 540/1

  34. E-W Implementation (2) • Let’s say top of heap for a node is –1000 -1000 -700 -400 -200 -100 inf TCOM 540/1

  35. E-W Implementation (3) • Say this is infeasible – change value to inf inf But now this is not a heap any more - “bubble down” offending node -700 -400 -200 -100 inf TCOM 540/1

  36. E-W Implementation (4) • Swap with best child -700 -700 inf -400 -200 -400 -200 -100 inf inf -100 inf TCOM 540/1

  37. E-W Implementation (5) • Heaps are efficient • Number of levels in the heap grows as the order of log2(n) • Where n is total number of elements in the heap • On average, each level is twice the size of the level above TCOM 540/1

  38. E-W Implementation (6) • Algorithm • Top of global heap is node n1, which has the best tradeoff • Go to heap of N1 and find partner n2 which appears to have best tradeoff • Remove n2 from node heap • Find components of n1 and n2 • Tricky bit: When we start this loop, all tradeoffs are correct, but we do not update all tradeoffs as we go along • Wait until an n1, n2 pair appears, then check tradeoff • If tradeoff is incorrect, reset and push pair back into heap • If tradeoff is correct, check if merge of components is feasible • If feasible, merge • Update global heap with new n1 tradeoff TCOM 540/1

  39. Creditability of E-W • E-W is heuristic • Guarantees resulting design is feasible • Does not guarantee that design is optimal • Poorer performance as number of sites increases • Works well for both homogenous and inhomogeneous traffic TCOM 540/1

  40. Esau-Williams Failure Rate Four sites per line TCOM 540/1

  41. Sharma’s Algorithm • E-W sometimes introduces crossings • We know the design can be improved if crossings are removed • Sharma’s algorithm builds MSTs in “wedges” from the central node TCOM 540/1

  42. Sharma’s Algorithm (2) • Compute the angle from the central node to each other node • Sort the angles • Move clockwise from node with smallest angle • Create sets of nodes such that adding another node would put Ssetw(node) > W • Start next set with that node TCOM 540/1

  43. Sharma’s Algorithm (3) • Sharma’s algorithm builds Capacitated Minimum Spanning Trees without crossings • So long as no set has more than half the pie (i.e., q > p) • However, Sharma is generally inferior to E-W • Poorer creditability • Higher cost TCOM 540/1

  44. Multiple Link Speeds • In real problems, almost always have a variety of link speeds to choose from • DS0 @ 64kbps • N x DS0 • T1 @1.5 Mbps • T3 @ 45 Mbps • Etc. TCOM 540/1

  45. Multiple Link Speeds (2) • Intuitively, we’d like the access tree to use higher speeds closer to the root, and lower speeds out towards the edges Root TCOM 540/1

  46. Predecessor Function • A tree T rooted at node Root can be represented uniquely by a predecessor function pred:V V on the set of vertices: • pred(Root) = Root • No other node is its own predecessor • For any node N there is an n>0 such that predn(N) = Root TCOM 540/1

  47. Ancestors • Given a tree T and the associated predecessor function, the ancestors of N are all the nodes N* where predn(N*) = N for some n > 0 TCOM 540/1

  48. Multispeed CMST Definition • Given: • A set of nodes N0, N1, …, Nn • A set of weights (w1, …, wn) for each node • A set of link types L1, L2, …, Lm • Capacities W1, W2, …, Wm • A cost matrix C(i,j,k) for the cost of link type Lk between Ni and Nj TCOM 540/1

  49. Multispeed CMST Definition (2) • Then the multispeed CMST problem is to find the tree rooted at N0 with link assignments such that Sancestors(N) w(i) < WLink(N, pred(N)) And SLinksc(end1L, end2L, typeL) is minimized TCOM 540/1

  50. MSLA Algorithm for Multispeed CMSTs • Assign each node n the smallest link l to connect it to root. Compute spare_capacity(n) = Wl – wn • Create tradeoff heap for n (similar to E-W) – tradeoffs represent savings by connecting site n to site i rather than to the root Tradeoffn(i) = c(n,i,L) + Upgrade (i, wn) – c(n,0,L) The function Upgrade() computes the cost of adding wn units to the links that connect i and 0 by following back the predecessors • Add edges as long as tradeoffs are less than or equal to 0 TCOM 540/1

More Related