1 / 9

Software Download Guide

Software Download Guide. Steps. 1. Before you start to download software,please install USB driver(Folder: USB Driver ) firstly. – Install “ InstallDriver.exe ” 2. Connect USB Cable (USB Port) to the computer. As following picture:

pearljones
Download Presentation

Software Download Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Software Download Guide

  2. Steps • 1. Before you start to download software,please install USB driver(Folder: USB Driver) firstly. – Install “ InstallDriver.exe ” • 2. Connect USB Cable (USB Port) to the computer. As following picture: Importance: Don’t connect Micro USB 5PIN plug to the Phone 3. Open “Software Platform-Multiport_download_exe_v5.1316.00.00” ---MultiPortFlashDownloadProject.exe

  3. 4.Click "File" to select DA file as the above picture.

  4. 5.Find this file(MTK_AllinOne_DA.bin) and select it. -Folder: Multiport_download_exe_v5.1316.00.00

  5. 6.Click "Options" and select submenu “Download/format with backup and restore calibration”

  6. 7.Click "Image Folder" to select relative Software Folder: A67D_F11_APS_EARP_V0_0_1(20130924)\BESTONE60D_11B_PCB01_gsm_MT6260_S00.A67D_F11_APS_EARP_V0_0_1.bin

  7. 8.First select "Sel All" and select COM Port & Download Format as shown in the picture .

  8. 9.After finished above steps, please Click "Start All".

  9. Steps • 10.Insert battery to the phone.(Don’t switch on) • 11.Connect the phone to USB cable(Micro USB 5PIN plug). • 12.You will see the stripe running as below: • 13. When showing this picture, it means successful to download Software.Then pull out the USB cable on phone and battery. Insert the battery again and switch on the phone. To write the IMEI back to phone.—please check the instruction file: “ Write IMEI NO.Tool Guide”

More Related