1 / 4

Oregon Robotics Tournament and Outreach Program

Oregon Robotics Tournament and Outreach Program. RCX Basics. Program 1. Motor wires attached to Ports A and C Press the red On-Off button. What happens? Press the Prgm button until a 1 appears Put your robot on the floor and press the Run button. What happens?

ownah
Download Presentation

Oregon Robotics Tournament and Outreach Program

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Oregon Robotics Tournament and Outreach Program RCX Basics

  2. Program 1 • Motor wires attached to Ports A and C • Press the red On-Off button. What happens? • Press the Prgm button until a 1 appears • Put your robot on the floor and press the Run button. What happens? • Turn one of the motor wires 180 degrees and press the Run button. What happens?

  3. Program 2 • Connect two touch sensors with long wires to Ports 1 and 3 • Turn on the RCX and select Program 2 • Put your robot on the floor and press Run. What happens? • Using the touch sensor on Port 1, push and hold the yellow button. What happens? • Do the same with the touch sensor on Port 3 • “Drive” your robot around the floor

  4. Program 3 • Light sensor connected to Port 2 • Turn on the RCX and select Program 3 • Hold your robot and press the Run button • What happens as you move the light sensor between the white area and the black area below?

More Related