1 / 24

TECHNOLOGY AND ENGINEERING

TECHNOLOGY AND ENGINEERING. SKILL DEPARTEMENT PROGRAMME : BUILDING TECHNOLOGY SKILL COMPETENCE : DRAWING BUILDING TECHNOLOGY. DRAWS BUILDING UTILITY. Description of Building Utility: 1. Draws Plumbing Installation 2. Draws Building Sewerage (drainage)

owensc
Download Presentation

TECHNOLOGY AND ENGINEERING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TECHNOLOGY AND ENGINEERING SKILL DEPARTEMENT PROGRAMME : BUILDING TECHNOLOGY SKILL COMPETENCE: DRAWING BUILDING TECHNOLOGY

  2. DRAWS BUILDING UTILITY Description of Building Utility: 1. Draws Plumbing Installation 2. Draws Building Sewerage (drainage) 3. Draws Electrical Installation BUILDING UTILITY 2

  3. Plumbing Section (point 2) Building Utility

  4. Draws Septic Tank Instalation( Menggambar Instalasi Tangki Septik ) Identifying elements of Septic Tank Installation Objectives : • Student competent Identifying of Septic Tank Installation. • Student competent to identifying of Waste Water Infiltration installation. • Student competent to placing of Septic Tank Building Utility

  5. Function of Septic Tank (Fungsi Septic Tank) • Septic Tank construction is a place for processing dirty water especially sewage from water closet which is very important domicile, because when it is not paid attention will cause pollution of houses environment around, when it uses swallow weel as water source to pulfill drinking water family need. Building Utility

  6. Identifying element of Septic Tank Instalation Element of Septic Tank Building Utility

  7. Identifying element of Septic Tank View Cross Section of Tank Teknologi dan Rekayasa

  8. Function of Infiltration area (Fungsi Rembesan) • Function of Penetration is as dirty water filter from septic tank surface which flooded because it continuously get addition water every day in use, penetration is made of gravel, sand and palm fiber. Dirty water absorbs into ground after passing media filter, so its dirtiness is less. Building Utility

  9. Identifying element of Waste Water Infiltration Element of Waste Water Infiltration Building Utility

  10. Infiltration Instalation Area • The Biological to Waste Pollution Building Utility

  11. Menentukan Volume Septic Tank • Determining septic tank volume - Mineralisation process of mood becomes mature mood between 60 – 100 days. For hot climate 60 days and wet climate area 100 days. - Deposal or taking mature mood between 1 – 4 years and it’s better using time of deposal every two years. - Every people produces mature mood between 28.8 – 30.0 liter per year. (Sumber : Ilmu Teknik Kesehatan 2, DPMK, Jakarta.) Building Utility

  12. Menentukan Volume Septic Tank - If septic tank is planned for 10 people, so amount of mature mood in 2 years : 10 x 2 x 30.0 liter = 600 liter - Mineralisation process is taken during 75 days, so the amount of mood : 10 x 75/365 x 30.0 liter = 61.6 liter. So mood surface = 600 + 61.6 = 661.6 liter - To keep the height of mood, surface needs to be added 10 – 20 cm Building Utility

  13. Menentukan Volume Septic Tank - Every person produces Tiap orang perhari rata-rata menghasilkan dirty abot 1 kg or 1 liter from 25 litter a day. - Whereas water is held during 3 days in order typus bactery, dysentri and so on have died or are not dangerous. Therefoe the content of water is : 3 days X 10 people X 25 X 1 liter per people per day = 750 liters. So the surface of mood + water = 661.6 + 750 = 1411.6 liter = 1.4116 m3 Building Utility

  14. Menentukan Volume Septic Tank - The atmosphere of surpace water in the tank is covered with part of lower tank between 5 – 20 cm • If the deept of mood + water = 1.50 m (minimal), long of A meter and wide of B = ½ A, so A x ½ A x 1.5 = 1.4116 0.75 A x A = 1.4116 So it is taken : A = 1. 40 m (long) B = 0.70 m (wide) C = 1.5 m + 0.1 m = 1.6 m (high) So high of the septic tank : 1.60 + (15 – 30 cm) = 1.75 m - 1.90 m Building Utility

  15. Identifying element of Element of Teknologi dan Rekayasa

  16. Cross Section of Septic Tank Building Utility

  17. Concrete Septic Tank • Septic Tank New Style Building Utility

  18. Septic Tank Treatment Treat to Closet Building Utility

  19. Min Standard distance of Infiltrate Instalation to water well and standard construction Placing element of Septic Tank and Infiltrate Instalation. Safety standard of healthy: • Min. 10 meter • Construction : 1. Concrete construction 2. Wall of stone artificial 3. Waterproof Building Utility

  20. System of waste water instalation Building Utility

  21. Sitting Closet Detail Building Utility

  22. Placing Water Closet Placing element of plumbing fixture. Building Utility

  23. Warning • Don’t do it Building Utility

  24. Contact By: MULYADI http://mulyadi202.blogspot.com e-mail:mulyadi1960@gmail.com SMKN 2 Kota Tasikmalaya Thank You BUILDING UTILITY

More Related