1 / 26

Lesson 5-3

Lesson 5-3. Geometry in Motion. Ohio Content Standards:. Ohio Content Standards:. Describe and apply the properties of similar and congruent figures; and justify conjectures involving similarity and congruence. Ohio Content Standards:.

orla-greene
Download Presentation

Lesson 5-3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lesson 5-3 Geometry in Motion

  2. Ohio Content Standards:

  3. Ohio Content Standards: Describe and apply the properties of similar and congruent figures; and justify conjectures involving similarity and congruence.

  4. Ohio Content Standards: Make and test conjectures about characteristics and properties (e.g., sides, angles, symmetry) of two-dimensional figures and three-dimensional objects.

  5. Ohio Content Standards: Draw and construct representations of two- and three-dimensional geometric objects using a variety of tools, such as straightedge, compass and technology.

  6. Ohio Content Standards: Perform reflections and rotations using compass and straightedge constructions and dynamic geometry software.

  7. Ohio Content Standards: Represent and model transformations in a coordinate plane and describe the results.

  8. Ohio Content Standards: Draw the results of translations, reflections, rotations and dilations of objects in the coordinate plane, and determine properties that remain fixed; e.g., lengths of sides remain the same under translations.

  9. Ohio Content Standards: Show and describe the results of combinations of translations, reflections and rotations (compositions); e.g., perform compositions and specify the result of a composition as the outcome of a single motion, when applicable.

  10. Translation

  11. Translation When a figure is slid from one position to another without turning it.

  12. Translation When a figure is slid from one position to another without turning it. Translations are sometimes called “slides”.

  13. Reflection

  14. Reflection When a figure is flipped over a line. The new figure is the mirror image of the original.

  15. Reflection When a figure is flipped over a line. The new figure is the mirror image of the original. Reflections are sometimes called “flips”.

  16. Rotation

  17. Rotation When a figure is turned around a fixed point.

  18. Rotation When a figure is turned around a fixed point. Rotations are sometimes called “turns”.

  19. Identify each motion as a translation, reflection, or rotation.

  20. Identify each motion as a translation, reflection, or rotation.

  21. Identify each motion as a translation, reflection, or rotation.

  22. Identify each motion as a translation, reflection, or rotation.

  23. In the figure, FGHONP by a rotation.

  24. In the figure, FGHONP by a rotation. Name the image of H.

  25. In the figure, FGHONP by a rotation. . . Name the side that corresponds to OP.

  26. Assignment:Pgs. 201-202 9-24 all, 28-33 all

More Related