1 / 23

Aula Prática 6&7

Aula Prática 6&7. Balanços integrais. Resolution. Exit Surface. Momentum flux at the entrance. The fluid leaving through the area of lower momentum entered through an surface shorter than 2L. Using the mass conservation one gets: . The Momentum entering is:. And the force and Cd.

olathe
Download Presentation

Aula Prática 6&7

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Aula Prática 6&7 Balançosintegrais

  2. Resolution Exit Surface

  3. Momentum flux at the entrance • The fluid leaving through the area of lower momentum entered through an surface shorter than 2L. Using the mass conservation one gets: • The Momentum entering is:

  4. And the force and Cd

  5. Let us consider a large number of plates, as in a real turbine.

  6. Resolution • In this case there is movement of the plate. The linear speed is: • The relative velocity has the same modulus and opposite sign. The discharge is the jet discharge, if we assume many plates. • Maximum power is obtained when the derivative in relation to the angular velocity is null:

  7. In this case • Whole jet the kinetic energy would be extracted. Efficiency would be 100%.

  8. Mass balance • Momentum Balance • Energy Balance

  9. Resolution

  10. Resolution • Bernoulli • Mass conservation

  11. Resolution considering This equation states that the force must balance the hydrostatic pressure plus the momentum exiting from under the sluice gate. The force tends to zero when h2 goes to zero. If the momentum entering into the system was relevant one had to deduce it from the force:

  12. Description of the problem • Vj is the jet velocity relative to the boat and Vin is the inlet velocity also relative to the boat. Qj is the jet discharge (equal to the inlet discharge). • The boat “sees” the water entering into the control volume at its own velocity and leaving it at the relative velocity (Vj). Vin V Vj V The boat velocity depends on the jet velocity, on the discharge and on friction. If there was no friction there would be no force and the maximum boat speed would be the jet speed.

  13. This is the force applied over the fluid inside the green volume. The pressure reduction at the interface between both is the symmetrical of that force. • This force must appear in the application to the blue control volume: • If we had considered a control volume without the green area, we should consider Vin instead of V, but in that case we should have computed the pressure force in front of the boat, computed as: Vin Vj V • Which is the same result as before.

  14. Resolution

  15. Resolution

More Related