Best Gas Water Heater Installation Services

1. Best Gas Water Heater Installation Services Water heaters are one of the important electric equipment to handle with care. The life span of a gas water heater is about 8-12 years. If your water heater has exceeded its life span and causing some problems then it is best to change the water heater with a new one. For best gas water heater installation Westerville, you can approach professionals like Ohio Water Heater Company. There are a few things to be taken care of while installing a new gas water heaters.

2. 1.Check the place, location, and labels of the old one. Make sure that the water heater is larger than the old one with the latest upgrades. Ensure that the company of the water heater includes all the installation and service codes in it. 2.Start by draining the tank of the old one before installing it with a new gas water heater. Switch-off the supply valves of water and gas. Drain the tank by attaching the drain valve to a hose. 3.Making sure that all the supply gas and water valves are shut off, detach the gas and water lines with the help of two pipe wrenches. If the piping is soldered to the wall or the place, cut the pipe in a straight line using a hacksaw. If not just disconnect the water pipe with pipe wrenches. Gas

3. water heater cost Columbus is affordable when purchased from leading heating and cooling companies. 4.The final step in removing the old heater from the place is first to take away the screws supporting the vent from the place using a screwdriver. Clear the place for any development of rust or any damage. Remove the complete old unit. Clean the wall or floor it was located. 5.Now, it is time to place the new one. Make sure that the unit is placed at least 6 meters above the surface. Ensure that there is enough space around the water heater for ventilation or any labor to carry out the service easily. Connect the vent of the water heater using a nut driver. 6.Join all the parts of the water heater like the water line connection pipe and wires. Make sure in fitting the blue-coded tap to the cold water connection and red-coded one to the hot water connections. Tighten all the parts and adjust it using insulating tapes. 7.Connect the lines of the gas supply and tighten using two pipe wrenches and open the gas valve. Make sure that there are no leaks in the gas supply. 8.Turn on the controls and switch on the pilot light in the position, adjust the temperature, and start accessing the water heater. The Ohio Water Heater provides the best gas water heater installation services.