1 / 2

Threaded Hole and Pass Hole Designs for #6 Screw: Drawing #1

This document presents technical drawings for pass holes and threaded holes designed for #6 screws. The drawings include specifications for a pass hole with dimensions of 2.337" x 0.743" for the #6 screw, as well as a round section that can rotate 180 degrees with a diameter of 50.5/8” or 51.5/8”. Additionally, it features a tube of transport with an outer diameter of 2.75” and a CFF bracket included in Drawing #1. These specifications are crucial for engineers and designers working with screw-based structures.

odeda
Download Presentation

Threaded Hole and Pass Hole Designs for #6 Screw: Drawing #1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. pass hole for # 6 screw Drawing # 1 0.462 threaded hole for # 6 screw 2.337 0.743 Pass hole for #6 screw 0.611

  2. Drawing # 2 round that can rotate 180o 50 5/8” or 51 5/8 “ Tube of transport 2.75” OD CFF Bracket in drawing # 1

More Related