1 / 19

ALLEN & TORX WRENCHES NUT DRIVERS

ALLEN & TORX WRENCHES NUT DRIVERS. NUT DRIVERS. SCREWDRIVER HANDLE WITH A SOCKET BUILT ON. NOT MUCH TURNING POWER. WORKS WELL FOR SMALL NUTS OR SCREWS THAT AREN’T STUCK. USING A NUT DRIVER JOB SHEET #1 STEP #13. ARMATURE & COIL ASSEMBLY. AIR VAIN GOVERNOR. RIGHT. LEFT. LEFT.

nyssa-atkins
Download Presentation

ALLEN & TORX WRENCHES NUT DRIVERS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ALLEN & TORX WRENCHESNUT DRIVERS

  2. NUT DRIVERS SCREWDRIVER HANDLE WITH A SOCKET BUILT ON NOT MUCH TURNING POWER WORKS WELL FOR SMALL NUTS OR SCREWS THAT AREN’T STUCK

  3. USING A NUT DRIVERJOB SHEET #1 STEP #13 ARMATURE & COIL ASSEMBLY AIR VAIN GOVERNOR

  4. RIGHT LEFT LEFT TURNING SCREW COUNTER CLOCKWISE TO LOOSEN. CLOCKWISE REMEMBER RIGHTY TIGHTY, LEFTY LOOSEY. COUNTER CLOCKWISE

  5. NUT DRIVER SIZES 1/2” 3/8” 5/16” 3/16” 7/16” 11/32” 1/4” SAE SIZES WE HAVE IN THE TOOL ROOM. HANDLES ARE COLOR COORDINATED WITH SIZES ALSO COME IN METRIC SIZES WHICH WE DON’T HAVE. PUT BACK IN TOOL ROOM CORRECTLY!

  6. NUT DRIVERS SOME SOCKET SETS COME WITH NUT DRIVER HANDLES THAT YOU CAN PUT DIFFERENT SOCKETS ON. COVER WITH SOCKET REPORT

  7. NUT DRIVERS MAINTENANCE AND SAFETY • DON’T HAMMER ON THE HANDLES • ONLY TURN WITH HANDS, NOT PLIERS • KEEP CLEAN

  8. ALLEN WRENCHES

  9. ALLEN WRENCHES • SOME TIMES CALLED HEX WRENCHES • 6 SIDED TOOL MADE SEVERAL WAYS • T HANDLE • FOLD UP SET • BITS • USUALLY USED TO TURN SET SCREWS

  10. SET SCREWS USED TO “SET” OR HOLD OBJECTS ALLEN WRENCH INSERTED INTO SET SCREW EXAMPLE: HOLDING A PULLEY ON A CRANKSHAFT.

  11. ALLEN WRENCH SIZES • SAE COME IN FRACTIONS OF AN INCH • METRIC COME IN MILLIMETERS • BOTH MEASURED BY THE DISTANCE ACROSS THE HEX.

  12. BITS OF DIFFERENT LENGTHS T HANDLES APPROXIMATELY $50 BALL ENDS FOLD UP SETS APPROXIMATELY $10 ALLEN VARIATIONS

  13. BALL END ALLEN WRENCHES • USED WHEN YOU DON’T HAVE A STRAIGHT SHOT AT THE SET SCREW. • CAN COME IN AT AN ANGLE • NOT AS STRONG

  14. TORX WRENCHES

  15. TORX WRENCHES • ALSO A 6 SIDED WRENCH LIKE THE ALLEN BUT SHAPED MORE LIKE A STAR. • USED TO TURN SCREWS AND SMALL BOLTS WITH TORX HEADS

  16. TORX SIZES • TORX ARE SIZED BY NUMBERS THAT START WITH A “T” • T10 SMALLEST • T15 • T20 • T25 • T27 • T30 • UP TO • T60

  17. TORX SCREW HOLDING HEADLIGHT IN NOTICE BUG GUTS FOR THAT REAL EFFECT!! T 15 HEADED SCREW T 15 TORX DRIVER

  18. THEFT DETERRENT TORX REVERSE TORX BITS OF DIFFERENT LENGTHS TORX VARIATIONS NOTICE HOLE IN THE MIDDLE. FITS SCREWS THAT HAVE A BUMP THAT FITS UP IN THE MIDDLE

  19. ALLEN, TORX WRENCHES & NUT DRIVERS QUESTIONS?

More Related