ACTUAL CISCO 600-210 SERVICE PROVIDER MOBILITY UMTS TO LTE CERTIFICATION PRACTICE TEST

1. ACTUAL CISCO 600-210 SERVICE PROVIDER MOBILITY UMTS TO LTE CERTIFICATION PRACTICE TEST 600-210 Sample Question NWEXAM.COM Get complete detail on Cisco 600-210 exam guide to crack Cisco Service Provider Mobility UMTS to LTE Specialist. You can collect all information on 600-210 tutorial, practice test, books, study material, exam questions, and syllabus. Firm your knowledge on Cisco Service Provider Mobility UMTS to LTE Specialist and get ready to crack SPUMTS 600-210 certification.

2. www.nwexam.com Cisco Service Provider Mobility UMTS to LTE 600-210 Certification Exam Details Cisco 600-210 certifications are globally accepted and add significant value to any IT professional. The certification gives you a profound understanding of all the workings of the network models and the devices that are utilized with it. NWexam.com is proud to provide to you the best Cisco Exam Guides. The Cisco 600-210 Exam is challenging, and thorough preparation is essential for success. This cert guide is designed to help you prepare for the Service Provider Mobility UMTS to LTE certification exam. It contains a detailed list of the topics covered on the Professional exam. These guidelines for the SPUMTS will help guide you through the study process for your certification. To obtain Implementing Cisco Service Provider Mobility UMTS Networks certification, you are required to pass SPUMTS 600-210 exam. This exam is created keeping in mind the input of professionals in the industry and reveals how Cisco products are used in organizations across the world. 600-210 Service Provider Mobility UMTS to LTE Sample Questions 1

3. www.nwexam.com 600-210 Implementing Cisco Service Provider Mobility UMTS Networks Exam Summary ●Exam Name: Implementing Cisco Service Provider Mobility UMTS Networks ●Exam Code: 600-210 SPUMTS ●Exam Price: $300 USD ●Duration: 90 mins ●Number of Questions: 65-75 ●Passing Score: Variable (750-850 / 1000 Approx.) ●Exam Registration: PEARSON VUE ●Sample Questions: Cisco 600-210 Sample Questions ●Recommended Practice: Cisco Service Provider Mobility UMTS to LTE Specialist Practice Test ●Recommended Training: Implementing Cisco Service Provider Mobility UMTS Networks – (SPUMTS) Topics covered in the Service Provider Mobility UMTS to LTE Service Provider Mobility UMTS to LTE 600-210 Exam GPRS/UMTS- 3% 1 Understand and describe GSM/GPRS and UMTS architecture SS7 GTT/MAP- 11% 1 Describe application of SS7 in wireless networks 2 Describe SIGTRAN protocol stacks (M3UA) and MTP3 based routing 3 Describe SCCP layer and Global Title Translation (GTT) mechanism 4 Analyze Global Title Translation (GTT) Case studies in mobile 5 Describe Application layer protocols Tunneling Protocols (GTP) 15% 600-210 Service Provider Mobility UMTS to LTE Sample Questions 2

4. www.nwexam.com 1 Describe the basics of GTP and packet structure 2 Identify different versions of GTP and compare them 3 Describe GTP tunnel, location and mobility management messages and their relevance 4 Describe failure and Recovery procedures 5 Configure GTP end points between UMTS nodes and LTE nodes 6 Troubleshoot GTP SGSN (3G UMTS Node) 20% 1 Network functions 2G/3G SGSN and call flows a) Describe SGSN architecture and interfaces b) Identify SGSN functions c) Describe protocol stacks and procedures d) Describe mobility management signaling and call flows e) Describe session management signaling and call flows f) Describe GS interface procedures g) Describe Gd interface procedures 2 Configuration a) Configuration of IU interfaces over both IU/IP and IU/ATM b) Configuration of the Gr interface for both narrow band SS7 and sigtran c) Configuration of the Gn /Gp interface d) Configuration of the Gs interface towards the MSC e) Configuration of the Gb interface f) Configuration of the Gd interface g) Describe SGSN Operator policy structure and feature sets h) Configure SGSN Operator policy and feature sets i) Troubleshooting SGSN configurations 3 Policing architecture a) Describe SGSN pooling, key benefits and design considerations b) Configure SGSN pooling c) Describe offloading mechanism in pooling d) Configure MSC pooling architecture e) Describe MSC offloading in an SGSN pooled network 4 Direct tunnel a) Implement direct tunnel in a SGSN network 600-210 Service Provider Mobility UMTS to LTE Sample Questions 3

5. www.nwexam.com b) Explain subscriber movement from one tunnel to two tunnel functionality c) Troubleshooting Direct tunnel 5 Network sharing a) Describe and implement MOCN architecture b) Describe and implement GWCN architecture 6 Security functions a) Describe GSM and UMTS security principles b) Describe different security architecture in UMTS 7 QoS functions a) Describe session management QoS functions b) Describe R99 and R97 QoS Conversion c) Configure QoS negotiations and override function 8 S4-SGSN a) Describe evolution to S4-SGSN b) Describe Mobility management signaling and call flows for S4-SGSN c) Describe location management signaling and call flows for S4-SGSN d) Describe location management signaling and call flows for S4-SGSN e) Configure basic S4-SGSN f) Troubleshooting S4-SGSN Diameter (MPC centric)- 12% 1 Define and understand diameter base protocol 2 Understand transport layer functionality of diameter protocol 3 Understand and implement diameter routing agents 4 Understand diameter peer discovery 5 Understanding diameter message processing 6 Understanding diameter error handling mechanism 7 Describe and understand diameter re-authorization procedure 8 Describe and understand DCCA model Tunneling Protocols (Others)- 13% 600-210 Service Provider Mobility UMTS to LTE Sample Questions 4

6. www.nwexam.com 1 Basics of tunneling and encryption a) Identify application of tunneling in wireless data networks 2 GRE a) Identify applications of GRE in wireless data networks b) Configure GRE tunnels c) Troubleshoot GRE tunnels 3 Layer 2 Tunneling Protocol (L2TP) a) Identify applications of l2TP in wireless data networks b) Describe LNS selection and load balancing c) Describe L2TP over IPSec d) Configuring L2TP tunnels e) Troubleshoot L2TP tunnels 4 Internet Protocol Security (IPsec) a) Configure IPSec tunnels on the GGSN b) Identify applications of IPSec tunnels as applied to Mobile wireless networks c) Describe IPSec for IPV6 d) Troubleshoot IPSec 5 MPLS over BGP a) Describe MPLS over BGP in Mobile Packet Core Networks b) Configure MPLS over BGP c) Troubleshoot MPLS over BGP GGSN (3G UMTS node)- 13% 1 Architecture Overview a) Identify key functions of the GGSN, and also understanding of the various interfaces 2 Implement Gn/Gp Interface a) Describe GTP protocol b) Describe call flows for mobility management/session management c) Configure Gn/Gp Interface d) Troubleshoot Gn/Gp Interface 3 APN a) Identify various IP address allocation mechanisms b) Describe the concept of virtual APNs c) Describe IP source address validation and access control list d) Configure APN e) Troubleshoot APN 600-210 Service Provider Mobility UMTS to LTE Sample Questions 5

7. www.nwexam.com 4 Implement Gx Interface a) Identify important diameter AVPs needed for Gx b) Describe basic Gx call flows c) Configure Gx interface d) Troubleshoot Gx interface e) Configure failure handling modes f) Selection of OCS based on static configuration, RADIUS attributes and PCRF g) Describe out-of-quota redirection handling 5 Implement Gy Interface a) Identify important diameter AVPs needed for Gy b) Describe basic Gy call flows c) Configure Gy interface d) Troubleshoot Gy interface e) Identify and describe common policy use cases f) Configure failure handling modes g) Configure usage monitoring over Gy 6 Implement AAA Interface a) Describe basic AAA authentication and accounting call flows b) Identify and describe important RADIUS attributes for authentication and accounting c) Configure AAA interface d) Troubleshoot AAA interface 7 Internetworking with non-3GPP access networks a) Describe non-3GPP IRAT handovers to GPRS/UMTS networks b) Configure Gn' interface c) Troubleshooting non-3GPP access networks 8 Gi interface a) Configure and implement various IP transport types b) Configure and implement static and dynamic routing protocols Inline Services- 13% 1 Packet inspection a) Explain common L7 applications b) Describe packet processing by the traffic inspection engine c) Describe and configure rules to be used for traffic inspection d) Describe and configure charging rules e) Configure charging policies f) Design and configure rulebases, and the priorities for the rules and their corresponding charging policies g) Describe handling of VOIP traffic 600-210 Service Provider Mobility UMTS to LTE Sample Questions 6

8. www.nwexam.com h) Configure post processing rules i) Troubleshoot packet Inspection 2 P2P detection a) Configure the rules for the various P2P applications b) Describe mechanism of updating the software to detect newer P2P applications 3 Content filtering a) Describe the various content filtering mechanisms available b) Describe ICAP protocol c) Configure content filtering d) Troubleshoot content filtering 4 Firewall policies a) Describe the basics of stateful attacks b) Configure access rules c) Troubleshoot firewall policies 5 NAT a) Configure NAT IP Pools, and Port Chunk Groups to be used b) Configure the NAT accounting records c) Troubleshoot NAT 6 Event-based charging a) Configure Event Data Records (EDRs) b) Configuration flow based charging records (Enhanced GCDR Records) c) Describe report generation using EDRs for different types 7 Fraud detection a) Describe DNS snooping b) Explain the various mechanisms available for detection of tethered traffic c) Describe updating the database for the list of known tethered devices d) Configure fraud detection e) Troubleshoot fraud detection 8 HTTP header enrichment a) Describe HTTP header enrichment b) Configure HTTP header enrichment c) Troubleshoot HTTP header enrichment 600-210 Service Provider Mobility UMTS to LTE Sample Questions 7

9. www.nwexam.com What type of questions are on the Cisco 600-210 exams? ● Single answer multiple choice ● Multiple answer multiple choice ● Drag and Drop (DND) ● Router Simulation ● Testlet Service Provider Mobility UMTS to LTE 600-210 Practice Exam Questions. Grab an understanding from these Cisco 600-210 sample questions and answers and improve your 600-210 exam preparation towards attaining a Implementing Cisco Service Provider Mobility UMTS Networks Certification. Answering these sample questions will make familiar with the types of questions you can expect on the actual exam. Doing practice with Service Provider Mobility UMTS to LTE SPUMTS questions and answers before the exam as much as possible is the key to passing the Cisco 600- 210 certification exam. 600-210 Implementing Cisco Service Provider Mobility UMTS Networks Sample Questions:- 01. Which two functions does the SGSN perform? (Choose two.) a) mobility management b) charging c) dynamic IP address allocation to a subscriber d) dynamic policy control e) deep packet inspection Answer: a, b 02. In MGT-based routing, which option is the GT address format of the called party? a) E.212 b) E.164 c) E.412 d) E.214 600-210 Service Provider Mobility UMTS to LTE Sample Questions 8

10. www.nwexam.com e) E.216 Answer: d 03. Which two options are benefits of Port Resource Pooling? (Choose two.) a) allows for increased number of network-requested PDP activations b) reduces the number of GGSN initiated deactivate procedure c) provides resiliency d) reduces the signaling towards the SMSC e) reduces the number of inter-SGSN RAU procedures Answer: c, d 04. In which two ways is GRE used in GGSN? (Choose two.) a) to transport the subscriber traffic between MS and GGSN b) to transport AAA packets between GGSN and the service provider RADIUS server c) to transport AAA packets between GGSN and the corporate RADIUS server d) to transport the enterprise subscriber packets to the corporate gateway e) to transport the enterprise subscriber packets to the Internet Answer: c, d 05. Which option lists the contents of the flow label in a GTPv0 header? a) IMSI and NSAPI b) MSISDN and NSAPI c) IMEI and NSAPI d) IMSI and Transaction Identifier e) IMEI and Transaction Identifier Answer: a 06. Which interface in the UMTS domain uses the BSSAP+ layer? a) Gs b) Gr c) Ge d) Ga Answer: a 600-210 Service Provider Mobility UMTS to LTE Sample Questions 9

11. www.nwexam.com 07. According to RFC 4006, for which two purposes is Diameter Control Credit Application designed? (Choose two.) a) authentication and authorization of access b) real-time content charging c) credit card payment authorization online d) credit authorization of prepaid users e) billing for postpaid users f) IMS core authorization g) collection of user statistics Answer: b, e 08. What layer of the OSI model does the BSSAP+ protocol map to? a) Data link layer b) Network layer c) Transport layer d) Application layer Answer: d 09. Which two services does GPRS support? (Choose two.) a) MMS b) SMS c) Video Calling d) EMM e) ESM Answer: a, b 10. In which two circumstances is Diameter Peer Discovery needed? (Choose two.) a) The Diameter client is rejected by the peer. b) The Diameter client must contact a first-hop Diameter agent. c) The Diameter agent must reply to the connect request of a Diameter client. d) The Diameter agent must search the next agent so that Diameter messages can reach the Diameter server. e) The Diameter agent must close the session with a Diameter client. Answer: b, d 600-210 Service Provider Mobility UMTS to LTE Sample Questions 10