1 / 12

FLAMMABLE AND COMBUSTIBLE LIQUIDS

FLAMMABLE AND COMBUSTIBLE LIQUIDS. LEL AND UEL (Same as LFL and UFL ) FLASH POINT VAPOR PRESSURE SPECIFIC GRAVITY VAPOR DENSITY. 1910.106 versus NFPA 30.

nuwa
Download Presentation

FLAMMABLE AND COMBUSTIBLE LIQUIDS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FLAMMABLE AND COMBUSTIBLE LIQUIDS • LEL AND UEL (Same as LFL and UFL) • FLASH POINT • VAPOR PRESSURE • SPECIFIC GRAVITY • VAPOR DENSITY

  2. 1910.106 versus NFPA 30 • The older version of OSHA’s 29 CFR 1910.106–Flammable Liquids, was based upon the 1969 version of NFPA30 Flammable and Combustible Liquids Code. • In response to OSHA’s revised Hazard Communication standard (due to incorporation of the Globally Harmonized System [GHS]), OSHA revised 29 CFR OSHA 1910.106. • The title of 29 CFR 1910.106 has been changed from “Flammable and Combustible Liquids” to “Flammable Liquids.” • The 2012 Edition of NFPA30 has not been revised to reflect GHS guidelines. • NFPA30 continues to use the term flammable and combustible liquid and refers to “classes” of liquids.

  3. NFPA 30FLAMMABLE LIQUIDS • Definitions under OSHA 1910 Standards • What about 1926 standards?? • FLASH POINT BELOW 100 DEGREES F • CLASSES • IA - FP BELOW 73 DEGREES BOILING POINT BELOW 100 DEGREES • IB - FP BELOW 73 DEGREES BOILING POINT AT OR ABOVE 100 DEGREES • IC - FP AT OR ABOVE 73 DEGREES AND BELOW 100 DEGREES

  4. NFPA 30COMBUSTIBLE LIQUIDS • FLASH POINT AT OR ABOVE 100 DEGREES F • CLASSES • II - FP AT OR ABOVE 100 DEGREES AND BELOW 140 DEGREES • IIIA - FP AT OR ABOVE 140 DEGREES AND BELOW 200 DEGREES • IIIB - FP AT OR ABOVE 200 DEGREES

  5. OSHA 1910.106 (GHS criteria)

  6. Applying the OSHA Standards • What type of facility is it? • What types of liquids fall under 1910.106? • If it is an industrial facility, is the handling of flammable and combustible liquids a major requirement of the business process or is it incidental use? • If incidental use, then follow 1910.106(e) Industrial Facilities

  7. Storage cabinets • 1910.106 (d)(3) • Design, construction, and capacity of storage cabinets • Specific requirements on design and construction. • Must withstand a 10 minute fire test. • Not more than 60 gallons of Category 1, 2, or 3 liquids should be stored in a cabinet nor more than 120 Gallons of Category 4.

  8. Venting Flammable Liquid Cabinets • “The fittings are sometimes provided by the manufacturers due to the fact that, in a few locations in the country, local ordinances require such vents to be provided.  Therefore, the manufacturers plug these vents [with plugs] which can be removed in those few areas where such venting is required.” • Unless a municipality or other government agency specifically requires the bung to be vented, venting is not required, nor is it recommended. 

  9. Inside Storage Rooms • Design requirements for inside storage rooms: • OSHA Standards • 1910.106(d)(4) • "Design and construction of inside storage rooms"

  10. Inside Storage Rooms • Room construction (ratings, doors, etc) • Electrical Wiring • Ventilation • Clear aisles

  11. Point of Use Procedures • If handling occurs in an industrial facility, follow requirements under 1910.106(e)(6) • Why is grounding and bonding required? • For example, what categories of liquids? • What impact does using a plastic safety can have on this? • Are plastic safety cans acceptable for use in the workplace by OSHA?

  12. Aboveground Storage Tanks • 1910.106(b)(2) addresses aboveground tanks • Topics include tank design and construction, spill containment, dikes, venting, etc.

More Related