1 / 58

Chapter 5 Creating and Editing Drawing Views

Chapter 5 Creating and Editing Drawing Views. Chapter 5 - Objectives. After completing this chapter, you will be able to perform the following: Make changes under the Drawing tab of the Application Options dialog box Create base and projected drawing views from a part

noura
Download Presentation

Chapter 5 Creating and Editing Drawing Views

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 5Creating and Editing Drawing Views

  2. Chapter 5 - Objectives • After completing this chapter, you will be able to perform the following: • Make changes under the Drawing tab of the Application Options dialog box • Create base and projected drawing views from a part • Create auxiliary, section, detail, broken, break out, and cropped views • Edit the properties and location of drawing views • Retrieve and arrange model dimensions for use in drawing views • Edit, move, and hide dimensions • Add automated centerlines • Add general dimensions, baseline, chain, and ordinate dimensions

  3. Chapter 5 – Objectives - continued • After completing this chapter, you will be able to perform the following: • Add annotations such as text, leaders, Geometric Dimensioning & Tolerancing • (GD&T), surface finish symbols, weld symbols, and datum identifiers • Create hole notes • Open a model from a drawing • Open a drawing from a model • Create hole, general, and revision tables

  4. Drawing Options • Drawing Options • Defaults • View Justification • Default Drawing File Type • Section Standard Parts • Non-Inventor DWG File • Title Block Insertion • Inventor DWG Version • View Block Insertion point • Dimension Type Preferences • Defaults Object Style • Default layer Style • Line Weight Display • View Preview Display • Capacity

  5. Creating a Drawing • Creating a Drawing • DWG or IDW files • Drawing Tools • Drawing Views • Sketch • Drawing Annotation

  6. Drawing Sheet Preparation • Sheets • Sheet format • Sheet size

  7. Title Block Insertion • Insert Title Block • Delete existing title block • Insert title block from Drawing Resources folder

  8. Border • Insert Border • Delete existing border • Insert border from Drawing Resources folder

  9. Property Fields • Property Fields and iProperties • Summary • Project • Status

  10. Creating Drawing Views • Creating Drawing Views • Created from an existing part, assembly, or presentation file • Save drawing in same directory as the parent file • Types.. • Base View • Projected View • Orthographic (Ortho View) • ISO View • Auxiliary View • Section View • Detail View • Crop • Slice • Broken View

  11. Creating Drawing Views • Base View - Component tab • File - Options change depending upon selected file • Presentation File • Sheet Metal • iAssemblies • Representations • Orientation • Scale from Base • Scale • Label • Style • Style from Base • Create projected views immediately after base view creation

  12. Creating Drawing Views • Base View - Model State tab • Options change depending upon selected file • Weldment • iPart • Member (iAssemblies) • Reference Data • Line Style • Hidden Line Calculation • Margin • Scale • Label • Style

  13. Creating Drawing Views • Base View - Options tab • All Model Dimensions • Model Weld Symbols • Bend Extents • Thread Feature • Weld Annotations • User Work Features • Tangent Edges • Foreshortened • Show Trails • Hatching • Align to Base • Definition in Base View • Section Standard Parts • View justification

  14. Creating Drawing Views • Using the Drawing View Dialog Box • Base View • First view that is created • Scale • Other drawing views can be projected • Orientation - preview image • No limit to number of base views • Projected Views • Orthographic or isometric • From any existing view • Preview image

  15. Exercise 5-1 • Creating a Multiview Drawing

  16. Creating Drawing Views • Auxiliary Views • Created by selecting an edge • Projected at 90 degrees

  17. Creating Drawing Views • Section Views • Created by sketching a line or multiple lines that will define the plane(s) that will be cut through a part or assembly • Section View command

  18. Creating Drawing Views • Section Views • Half Sections • Projected Sections • Aligned Sections • Offset Sections • Slice • Modifying Hatch • Right-click > Edit

  19. Creating Drawing Views • Hatching Isometric Views • Edit View

  20. Creating Drawing Views • Slice View • Based on sketch in source view • Target view = projected, orthographic or isometric

  21. Creating Drawing Views • Detail Views • Drawing view that enlarges an area of an existing drawing view by a specified scale • Detail View tool • Smooth Cutout Shape • Full Detail Boundary • Connection line

  22. Creating Drawing Views • Break Views • Removes a section or multiple sections from the middle of a long part and show just the ends • Break command

  23. Creating Drawing Views • Break Out Views • Expose internal components or features • Break Out tool • Boundary Profile

  24. Creating Drawing Views • Break Out Views • Depth Options • From Point

  25. Creating Drawing Views • Break Out Views • Depth Options • To Sketch

  26. Creating Drawing Views • Break Out Views • Depth Options • To Hole • Through Part • Remove drawing content from inside a closed profile through selected components located in the browser.

  27. Creating Drawing Views • Cropped Views • Shows a portion of a view • Rectangular • Circular • Based on a sketch in a view

  28. Move Drawing Views • Moving Drawing Views • Move cursor over drawing view • Select bounding box • Click and drag view • Children or dependent • Orthographic or auxiliary view • Detail and isometric views

  29. Exercise 5-2 • Creating Break, Section, Auxiliary, and Detail Views

  30. Editing Drawing Views • Editing Drawing View Properties • Edit a drawing view • Drawing View dialog box • Deleting Drawing Views • Views that are dependent

  31. Break and Align Views • Break alignment • Create alignment • Horizontal • Vertical • In Position

  32. Replace Model Reference • Change the component a drawing references • Part • Assembly • Presentation • Same file type • Similar size

  33. Exercise 5-3 • Editing Drawing Views

  34. Dimensions • Dimensions • Retrieve Model Dimensions • Edit and/or Change • Dimension Visibility • Dimension Value and Appearance • Automatically retrieve dimensions

  35. Dimensions • Dimensions • Edit Model Dimension • Change model dimensions value • Option available when Inventor is installed

  36. Selecting Dimensions • Quick Access toolbar • Select All Inventor Dimensions • Select All Model Dimensions • Select All Overridden Dimensions • Select All AutoCAD Dimensions

  37. Auto-Arrange Dimensions • Rearrange selected dimensions • Select dimensions in one or multiple views • Arrangement based on dimension style

  38. Dimensions • General dimensions • Not parametric = Associative • Move and center dimension text • Centerline to dashed line

  39. Dimensions • Add dimensions to an isometric view • Retrieve or add general dimensions • Space bar - Toggle between planes • Show All Part / Visible Work Planes

  40. Exercise 5-4 • Adding Dimensions

  41. Baseline Dimensions / Set • Baseline Dimension • Window / cross objects • Individual dimensions • Baseline Dimension Set • Select objects Window / cross methods • Dimensions held as a set

  42. Chain Dimensions / Set • Chain Dimension • Window / cross objects • Individual dimensions • Chain Dimension Set • Select objects Window / cross methods • Dimensions held as a set

  43. Exercise 5-5 • Creating Baseline and Chain Dimensions

  44. Ordinate Dimensions / Set • Ordinate Dimension • Select points or window / cross objects • Individual dimensions • Ordinate Dimension Set • Select points or window / cross objects • Dimensions held as a set

  45. Styles Editor • Edit existing style • Create new style based on current

  46. Annotations • Annotations • Adding • Centerlines • Surface texture symbols • Weld symbols • Geometric tolerance symbols • Text • Bill of materials • Balloons

  47. Annotations • Centerlines • Center Mark • Center Line Bisector • Center Line • Centered Pattern tools • Automated Centerlines • Centerline Settings • Apply To • Threshold • View Types • Projection

  48. Annotations • Adding more detail annotations • Surface Textures • Weld Symbols • Feature Control Frames • Text and Leaders • Format Text dialog box

  49. Hole and Thread Notes • Adding… • Hole & Thread Notes • Hole Note Styles • Formatting • Apply tolerance values • Editing • Side Views

  50. Exercise 5-6 • Adding Annotations

More Related