1 / 46

Slamming Impact Loads on Large High-Speed Naval Craft ASNE 2008

Slamming Impact Loads on Large High-Speed Naval Craft ASNE 2008. Sungeun Kim, Derek Novak (ABS) Hamn-Ching Chen (TAMU). Navy Vessels. Planing Hull High speed vs. length ratio Small high-speed naval craft: PT boats Hydrodynamic lift Displacement Hull Low speed vs. length ratio

nodin
Download Presentation

Slamming Impact Loads on Large High-Speed Naval Craft ASNE 2008

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Slamming Impact Loads on Large High-Speed Naval Craft ASNE 2008 Sungeun Kim, Derek Novak (ABS) Hamn-Ching Chen (TAMU)

  2. Navy Vessels • Planing Hull • High speed vs. length ratio • Small high-speed naval craft: PT boats • Hydrodynamic lift • Displacement Hull • Low speed vs. length ratio • Large navy vessels: destroyers, cruisers, battleships • Hydrostatic buoyancy • Semi-Planing/Semi-Displacement Hull • Intermediate speed vs. length ratio • Large high-speed naval craft • Partially dynamic & partially static support

  3. Large High-Speed Naval Craft CAT-2 MONO-1 CAT-1 MONO-2 MONO-3

  4. Design of High-Speed Naval Craft • Consider all intended operating conditions of the craft specified by Naval Administration • Significant wave height: H1/3 • Operating speed: V • Two design conditions in ABS HSNC Guides • Operational Condition: maximum design speed • Survival Condition: 10 knots Note: not to be less than L/12 HSNC 3-2-2/Table 1 Note: to be verified by Naval Administration

  5. Design of High-Speed Naval Craft (cont’d) Design Conditions Design Wave Heights and Speeds Operational Survival

  6. Objectives • Current slamming design pressure in HSNC are originally developed for small planing hulls • Speed vs. length ratio: • Slamming pressure from Heller & Jasper (1960) • Vertical acceleration from Savitsky & Brown (1976) • Refine and expand current rules to cover the bottom slamming design pressure for large semi-planing monohulls • Speed vs. length ratio • Vertical acceleration using LAMP and model test • Update wet-deck slammingdesign pressure for large high-speed multi-hulls • Validate numerical simulation program LAMP

  7. Large Amplitude Motion Program (LAMP) • DARPA 1988 Project • Advanced nonlinear ship motion simulation to complement linear methods • Extreme wave loads • Research sponsors • U.S. Navy (ONR, NSWCCD) • U.S. Coast Guard • American Bureau of Shipping • SAIC/MIT LAMP Development

  8. Bottom Slamming Design Pressure for Semi-Planing Monohulls

  9. Bottom Slamming Design Pressure • Current: 3-2-2/3.1.1 (Heller & Jasper) • Proposed: Pressure distribution factor FL Background: pressure reduction on bow and stern area considering 3D flow effect

  10. Vertical Acceleration • One of the most critical driving design factor for high-speed naval craft • Current: 3-2-2/1.1 (Savitsky & Brown) where • ncg 1/100 highest vertical acceleration • h1/3 1/3 significant wave height • Bw maximum waterline beam • cg deadrise angle at LCG • V design speed (3-2-2/Table 1) •  displacement •  running trim angle • Note: overestimating for smaller vessels and underestimating for larger vessels

  11. Vertical Acceleration (cont’d) • Proposed ncg: • Proposed Kv

  12. Test Vessel: MONO-1 • Design Conditions • Large semi-planing monohull with ship length over 100 m • ABS Class based on HSNC Guides • Loading Conditions

  13. LAMP Geometry Modeling for MONO-1 Nonlinear Geometry Model for Nonlinear Restoring and Froude-Krylov Forces Hydro Panel Model for Linear Radiation-Diffraction Forces

  14. Vertical Acceleration in Operational Condition Bow • Loading Condition: Full Load Departure • Displacement: 3000 tons • Speed: 38 knots • Sea state: SS5 with Hs=4m Mid Stern

  15. Vertical Acceleration in Survival Condition Bow • Loading Condition:Full Load Departure • Displacement: 3000 tons • Speed: 10 knots • Sea state: SS8 with Hs=9m Mid Stern

  16. Statistical Analysis • Peak Counting • Pick a highest peak between zero-crossings • Threshold: 10% of 1/100 highest peak average • Transient: ignore the first 1/5 of time series • 1/100th Highest Peak Average for Vertical Acceleration • Weibull Fitting for Slamming Impact Force

  17. 1/100th Vertical Acceleration • Operational Condition • Full Load Departure: 3000 tons • Speed: 38knots • Sea state: SS5 with Hs=4m • Operational Condition • Full Load Arrival: 2900 tons • Ship Speed: 40 knots • Sea State: SS5 with Hs=4m

  18. 1/100th Vertical Acceleration • Operational Condition • Full Load Minimum: 2800 tons • Ship Speed: 42 knots • Sea State: SS5 with Hs=4m • Survival Condition • Full load departure: 3000 tons • Speed: 10 knots • Sea state: SS8 with Hs=9m

  19. Impact Force in Operational Condition

  20. Impact Force in Survival Condition

  21. Impact Force in Operational Condition

  22. Design Pressure: Operational at Full Load Depart. Bottom Slamming Pressure: Full Load Departure at Hs=4m and V=38 knots Sectional Impact Force: (Heller & Jasper)

  23. Design Pressure: Operational at Full Load Arrival Bottom Slamming Pressure: Full Load Arrival at Hs=4m and V=40 knots Sectional Impact Force: (Heller & Jasper)

  24. Design Pressure: Operational at Full Load Min. Bottom Slamming Pressure: Full Load Minimum at Hs=4m and V=42 knots Sectional Impact Force: (Heller & Jasper)

  25. Design Pressure: Survival at Full Load Depart. Bottom Slamming Pressure: Full Load Departure at Hs=9m and V=10 knots Sectional Impact Force: (Heller & Jasper)

  26. Wet-Deck Slamming Pressure for Multi-Hulls

  27. Wet-Deck Slamming Design Pressure • Current: HSNC 3-2-2/3.5 • Proposed where FI pressure distribution factor VI relative impact velocity ha distance from waterline to deck H1/3 significant wave height

  28. Wet-Deck Design Pressure (cont’d) Current Wet-Deck Design Pressure Proposed Wet-Deck Design Pressure

  29. Test Vessel: CAT-1 • High-speed wave-piercing catamaran • Length: LWL=73m • Speed: 40knots • ABS Class • Hull damage was reported, likely due to wet-deck slamming impact loads

  30. LAMP Simulation for Wet-Deck Slamming • LAMP simulation with wet-deck option • 2D wedge impact theory (Ge, Faltinsen, Moan 2005) on longitudinal cuts • Require smaller time step • Require supplemental pitch damping model • LMPRES to extract wet-deck slamming pressure • PLMPRES to generate nodal pressure time series

  31. Supplemental Pitch Damping in LAMP Based on the model test measurements of CAT-1, additional pitch damping is considered for pitch motion simulation Supplemental pitch damping model in LAMP

  32. Relative Motion in Model Test Condition Relative Vertical Motion Vertical Acceleration

  33. Wet-Deck Slamming Pressure in Model Test Condition P1 P4 P3 P2

  34. Wet-Deck Slamming Pressure in Survival Condition

  35. Wet-Deck Slamming Pressure in Survival Condition x=0.9L from AP x=0.8L from AP

  36. Wet-Deck Slamming Pressure in Survival Condition x=0.6L from AP x=0.2L from AP

  37. Wet-Deck Slamming Pressure in Survival Condition

  38. Wet-Deck Slamming Pressure in Operational Condition

  39. Wet-Deck Slamming Pressure in Operational Condition x=0.9L from AP x=0.8L from AP

  40. Wet-Deck Slamming Pressure in Operational Condition x=0.6L from AP x=0.2L from AP

  41. Wet-Deck Slamming in Operational Condition

  42. FANS (Finite Analytic Navier-Stokes)Code • CFD solver developed by Texas A&M • Unsteady incompressible/compressible two-phase flow solver • Multi-block solver using overset grids • Nonlinear free-surface capturing scheme using level-set method • FANS developments in ABS-TAMU • LNG sloshing impact pressure • Wet-deck slamming impact pressure • Bow/stern slamming and green sea loads

  43. FANS Modeling of CAT-1: Overset Grid 25 blocks, 16 processors, 2.16 million grid points for half-domain

  44. FANS Wet-deck Slamming of CAT-1

  45. Summary • Bottom slamming pressure for monohulls • Vertical acceleration is one of the most driving design factor for high-speed naval craft. • Vertical acceleration has been revised to cover large semi-planing naval craft based on numerical simulation and model test • Slamming design pressure has been validated with existing design of high-speed naval craft • Wet-deck slamming pressure for multi-hulls • Numerical simulation for wet-deck slamming has been performed in time domain using LAMP • Wet-deck design pressure is revised based on numerical simulation. • Survival condition is found to be a governing condition for wet-deck slamming pressure

  46. On-going/Future Projects in ABS-SAIC-TAMU • Guide for direct analysis procedure • Wave-induced design loads • Whipping loads for monohulls • Wet-deck slamming loads for multi-hulls • Guide for slamming model test procedure • Vertical acceleration • Local vs. panel pressure • Statistic analysis for design pressure • Software validation of wet-deck slamming • Numerical simulation using LAMP/FANS code • Model test/Full scale measurements

More Related