1 / 22

ASENT Thermal Analysis Last revised: 8/17/2005

ASENT Thermal Analysis Last revised: 8/17/2005. Introduction. The ASENT Thermal Analysis is intended to be a ‘high order’ tool, which is intended to provide rapid, approximate (plus or minus 5 degrees) answers consistent with the accuracy of the input data.

nirav
Download Presentation

ASENT Thermal Analysis Last revised: 8/17/2005

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ASENT Thermal Analysis Last revised: 8/17/2005

  2. Introduction The ASENT Thermal Analysis is intended to be a ‘high order’ tool, which is intended to provide rapid, approximate (plus or minus 5 degrees) answers consistent with the accuracy of the input data. This level of accuracy is sufficient to identify areas in need of further attention (either by improving the accuracy of the applied power assumptions, refining other model inputs, or relying on a thermal specialist to further analyze items suspected of having thermal issues). The ASENT Thermal Analysis tool is based on the algorithms and approach, developed and validated, by the CALCE EPRC of the University of Maryland.

  3. Introduction • The ASENT Thermal Analysis tool supports five different cooling methods: • Conduction • Conduction with Natural Convection • Flow Over Components • Force Convection • Forced Convection with Natural Convection

  4. Introduction This tutorial will show the screens and steps involved to perform a simple Thermal Analysis using a Conduction cooling method. For more details, please refer to the ASENT online help. From ASENT’s Session Manager click on the ‘Help’ menu option. Select ‘ASENT Overview’ from the drop-down menu and navigate down to the ‘Performing Thermal Analyses’ help book. Here, you will find detailed explanations and diagrams describing each cooling method, along with other helpful information.

  5. Prerequisites for Performing a Thermal Analysis • In order to successfully conduct a Thermal Analysis and obtain meaningful data, the Board and it’s components must have sufficient definition to provide necessary information for the calculation tool. This includes: • The board must have a ‘PWB’ component defined. • The parts should have their location on the PWB defined. Select the ‘PWB Placement’ tab to review the part placement and any unplaced parts. • The Cooling Type and Boundary Conditions must be defined.

  6. PWB Defined in the Component Data Manager Here, we define the PWB component that represents our Sound card. This is done in the Component Data Manager by selecting the ‘PWBs’ tab. The ‘PWB Data’ tab is used for entering some general information about the board like its length, width, and the number of layers. Plated-Thru Hole Surface Mount

  7. PWB Defined – Layer Data When defining the board we can enter detailed information about the layers that make up the card. By clicking on the ‘PWB Layer Data’ tab you can define each layer. At a minimum, be sure to approximate the amount of metal in the board. For example, 1 oz of Copper is roughly 1 mil in thickness (thickness is expressed in mils or 1/1000 of an inch).

  8. PWB Defined – Composition Data Sometimes when performing a detailed thermal analysis the analyst will define regions on the board that consist of different materials. For example, a region of Copper may be defined directly below some components, to aid in drawing heat down into the board. This region of Copper may be defined on a layer that is primarily Epoxy. This information would be defined by selecting the ‘PWB Composition Data’ tab and selecting the Edit button.

  9. PWB Component displayed in the Reliability Manager For our Sound card we have a PWB component as part of our part list. Here, the ‘Part Static Data’ tab is selected, and it shows us that the board has Plated-Thru Holes. It also shows the length, width and number of layers. The PWB component is added to the part list just like any other component. For more information, refer to the tutorial on Failure Rate Predictions.

  10. Placement data tab selected for SOUND card Once the PWB component has been added to the part list for the Sound card, then additional data tabs will appear when we select the Sound card. Here, the ‘PWB Placement Data’ tab is selected and it shows the part placement for this card.

  11. Component placement Component placement can be imported from a variety of CAD (i.e. Mentor) tools if placement data exists. However, users can easily place components on a board using ASENT’s placement tool, if that information is not available to import. Any unplaced parts will be listed on the right side of the screen. To place a part, select the part and click on the ‘Place’ button. The part will appear on the board. Click on it and drag it to the desired location.

  12. Thermal setup tab selected for SOUND card This screen shows the results after we have set up the boundary conditions. To select the cooling method, boundary conditions and other parameters, click on the ‘PWB Thermal Setup’ tab and click on the ‘Edit’ button.

  13. Set boundary conditions for thermal analysis The Thermal Setup tool in ASENT allows the user to quickly set temperature boundary conditions in order to perform a thermal analysis. Here, the user clicks on a color from the temperature scale and then paints the edge conditions for this analysis using conduction cooling.

  14. Cooling type and parameters Here, the user sets the cooling type and parameters to perform a thermal analysis using conduction cooling. There are 5 different cooling methods currently supported by the toolkit: Forced Natural Convection, Flowover Components, Forced Convection, Conduction with Natural Convection, and Conduction.

  15. Run Thermal Analysis on SOUND card Now that the parts are placed on the board, and the thermal setup information has been entered, merely right-click on the board and select the ‘Calculate’ | ‘Thermal’ option.

  16. PWB Analysis Display Tool By selecting the ‘PWB Analysis Results’ tab and clicking the ‘View’ button, the display tool is invoked The Display tool in ASENT allows the user to graphically display a wide variety of data. Here, the user can display either Power, Failure Rate, Case, Substrate or Junction Temperature, or the temperature values for any of the layers. A user-defined report is available for extracting just the fields that you are interested in. This is part of the normal ‘Reports’ option in the Reliability Manager..

  17. SOUND card temperatures for layer 1 Here, the user is displaying the temperature values for layer 1 on the SOUND card.

  18. Thermal results for component ULL01 The user can view the applied power, failure rate, or thermal results for a specific part by double-clicking on that part.

  19. Calculated FR for ULL01 is 7.0033 The results of the thermal analysis automatically feed the failure rate calculator.

  20. Trade-offs can be performed easily Here, we change the number of thermal vias under ULL01 from 0 to 10, and re-run the analysis.

  21. Junction Temperature drops 38.32 °C In this example, the effect of the thermal vias significantly lowers the junction temperature for ULL01 (155.44 Degrees C versus 193.76 Degrees C).

  22. Calculated FR for ULL01 is now 1.6527 We calculate the failure rates using the new thermal analysis. As expected, the failure rate for ULL01 is now much lower (1.6527 versus 7.033).

More Related