1 / 20

Ultimate Guide to Total Coating Solutions

Have a look at this document by Nippon Paint Professionals guiding you with complete knowledge of total coating & construction solutions. They have a wide range of Protective & Architectural Coating suitable for the Interior, Exterior walls, Glass, Road, Roof, Tiles & Ceramic, waterproofing, wood & metal etc. For detailed info download this documentu2013

nippontpaint
Download Presentation

Ultimate Guide to Total Coating Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CMI INSTALLATION SYSTEM FOR: EXTERNAL GENERAL AREA (FLOOR) CMI INSTALLATION SYSTEM FOR: EXTERNAL FACADE RC Slab Thick Bed Mortar CMI FloorScreed 085 + water Concrete Wall Thick Bed Mortar Cement/Sand ratio: 1:4 + PMP Cement Additive 100gm (1 sachet to 1 bag 50kg OPC) or alternatively CMI Render Adhesive Bed CMI TileFix 181 mix with CMI Mortar Admix 380 Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Adhesive Bed CMI TileFix 181 mix with CMI Mortar Admix 380 Homogenous Porcelain Tiles Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Ceramic Tiles / Stones Notes: Ensure to leave a movement joint of at least 6mm at perimeter between wall and floor and when different material meets. Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4 CMI INSTALLATION SYSTEM FOR: EXISTING TILES CMI INSTALLATION SYSTEM FOR: TIMBER Screeding RC Slab Ex-Mortar Ex-Ceramic Tile / Stone Timber Adhesive Bed CMI TileFix 181 mix with CMI Mortar Bond 330 Primer CMI Mortar Bond 330 Tile / Stone Adhesive Bed CMI TileFix 181 mix with CMI Mortar Bond 330 Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Finishes New Tile / Stone Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4 Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4

  2. CMI INSTALLATION SYSTEM FOR: SWIMMING POOL CMI INSTALLATION SYSTEM FOR: BATHROOM Brick Wall RC Slab Angle Fillet Movement joint by other to all internal corners of wall RC Slab Angle Fillet Waterproofing CMI ProofCoat 087 (2 Coats) Waterproofing: CMI ProofCoat 087 (2 Coats) Thick Bed Mortar Floor: CMI FloorScreed 085 + Water Wall: Cement/Sand ratio: 1:4 + PMP CementAdditive 100gm (1 sachet to 1 bag 50kg OPC) Slurry bond coat: 1 part OPC to 1 part CMI Mortar Bond 330 (v/v)(without dilution) Thick Bed Mortar: Floor: CMI FloorScreed 085 + Water Wall : Cement/Sand ratio: 1:4 + PMP Cement Additive 100gm (1 sachet to 1 bag 50kg OPC) Adhesive Bed CMI TileFix 181 mix with CMIMortar Admix 380 Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Homogenous Porcelain Tiles Adhesive Bed: CMI TileFix 181 + CMI Mortar Admix 380 Grouting: CMI TileCrete 182 + CMI Mortar Admix 380 (dilution 1:1 with clean water) Glass Mosaic Tiles Up to 300 mm Fiberglass netting by others embedded into waterproofing at floor wall junction extended 100mm Notes: 1) Movement joints shall be incorporated at perimeter joint between floor & wall and where other materials meet. Note: 1) Provide roofing shade for external application of waterproofing and tiling works 2) Movement joint according to BS 5385: Part 1-4 BILL OF QUANTITY (SAMPLE) CMI INSTALLATION SYSTEM FOR: INTERNAL GENERAL AREA CMI INSTALLATION SYSTEM FOR: ALC BLOCK Brick Wall ALC Block RC Slab Primer CMI Mortar Bond 330 Thick Bed Mortar Floor: CMI FloorScreed 085 + Water Wall: Cement/Sand ratio: 1:4 + PMP CementAdditive 100gm (1 sachet to 1 bag 50kg OPC) CMI BlockFix 187 (ALC Thin Bed Adhesive) Thick Bed Mortar Floor: CMI FloorScreed 085 + Water Wall: Cement/Sand ratio: 1:4 + PMP Cement Additive 100gm (1 sachet to 1 bag 50kg OPC) Adhesive Bed CMI TileFix 181 mix with CMI Mortar Admix 380 Adhesive Bed CMI TileFix 181 mix with CMI Mortar Admix 380 (For Ceramic Glazed Tiles & Homogeneous Porcelain Tiles) Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Ceramic Tile / Mosaic Homogenous Porcelain Tiles Notes: 1) Movement joints shall be incorporated at perimeter joint between floor & wall and where other materials meet. Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4

  3. CMI INSTALLATION SYSTEM FOR: EXTERNAL GENERAL AREA (FLOOR) CMI INSTALLATION SYSTEM FOR: EXTERNAL FACADE RC Slab Thick Bed Mortar CMI FloorScreed 085 + water Concrete Wall Thick Bed Mortar Cement/Sand ratio: 1:4 + PMP Cement Additive 100gm (1 sachet to 1 bag 50kg OPC) or alternatively CMI Render Adhesive Bed CMI TileFix 181 mix with CMI Mortar Admix 380 Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Adhesive Bed CMI TileFix 181 mix with CMI Mortar Admix 380 Homogenous Porcelain Tiles Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Ceramic Tiles / Stones Notes: Ensure to leave a movement joint of at least 6mm at perimeter between wall and floor and when different material meets. Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4 CMI INSTALLATION SYSTEM FOR: EXISTING TILES CMI INSTALLATION SYSTEM FOR: TIMBER Screeding RC Slab Ex-Mortar Ex-Ceramic Tile / Stone Timber Adhesive Bed CMI TileFix 181 mix with CMI Mortar Bond 330 Primer CMI Mortar Bond 330 Tile / Stone Adhesive Bed CMI TileFix 181 mix with CMI Mortar Bond 330 Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Grouting CMI TileCrete 182 mix with CMI Mortar Admix 380 (Dilution 1:1 with clean water) Finishes New Tile / Stone Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4 Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4

More Related