1 / 3

8086/8088 Architecture

8086/8088 Architecture. Seven categories of signals. Max/min mode: min mode is used for single procss. Max mode is used for multiprocss Test: synchronize multiple processors Data Enable: generally connected to biriectional buffer to isolate MPU from system bus.

nigel-berry
Download Presentation

8086/8088 Architecture

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 8086/8088 Architecture • Seven categories of signals. • Max/min mode: min mode is used for single procss. Max mode is used for multiprocss • Test: synchronize multiple processors • Data Enable: generally connected to biriectional buffer to isolate MPU from system bus. • Data tran/rcvr: controls data flow. • IO or memory: indicates whether the proc cycle is memory operation or IO operation. • Bus High Enable: enble the higher order byte of 16 bit data Power & clock BHE/S7 A19/S6 A16/S3 AD15 AD0 ALE M/IO RD WR DEN DT/R VCC CLK MuX add & status signals GND INTR NMI HOLD READY RESET External rqst Mux add and data buses Response to External rqst INTA HOLDA Control & status signals Multipro envrnmnt TEST MN/MX

  2. Max/min mode control signals

  3. Programming model AX BX CX DX SP BP SI DI CS DS SS ES IP

More Related