1 / 8

Lecture #2 EGR 110 – Engineering Graphics

Isometric. Multi-view Drawing. Lecture #2 EGR 110 – Engineering Graphics. Reading Assignment: Ch. D in Engineering Graphics Workbook, Series 1.2 or Series 2 Sketching Assignment: Sketching Assignment #2. Chapter D: Orthographic Projection

niel
Download Presentation

Lecture #2 EGR 110 – Engineering Graphics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Isometric Multi-view Drawing Lecture #2 EGR 110 – Engineering Graphics Reading Assignment:Ch. D in Engineering Graphics Workbook, Series 1.2 or Series 2 Sketching Assignment:Sketching Assignment #2 Chapter D: Orthographic Projection Last week we concentrated on sketching multi-view drawings when given an isometric drawing. This week we will concentrate on sketching isometric drawings when given multi-view drawings.

  2. O 30 O 30 Isometric Axes Isometric Graph Paper Lecture #2 EGR 110 – Engineering Graphics • Isometric Sketching • Isometrics are 2D pictorial drawings that give the impression of being 3D. • Isometrics are primarily intended for visualization. • Isometrics are often not scaled since the lengths of lines may be unscaled in order to give the proper 3D impression. • Isometric sketches use "isometric axes" as shown. • Isometric graph paper is commonly used to sketch isometrics. Be sure that the angled lines form 30 angles with the horizontal and not with the vertical (i.e., the paper can be used only with portrait or landscape orientation, not both).

  3. Major axis of ellipse circle Minor axis of ellipse “enclosing box” ellipse Circle is tangent to the midpoints of the “enclosing box” “enclosing parallelogram” Ellipse is tangent to the midpoints of the “enclosing parallelogram” Lecture #2 EGR 110 – Engineering Graphics • Isometric Sketching (continued) • Note that lines that are parallel in the actual object will still be parallel. • Remember with circular features to use the "enclosing box" method. However, the "enclosing box" will be a parallelogram rather than a square and the hole or circular feature will appear as an ellipse.

  4. Lecture #2 EGR 110 – Engineering Graphics • Possible steps in Isometric Sketching • Form the "box" which contains the object using construction lines. • Look for normal surfaces (parallel to the principle planes of the box). Normal surfaces are easiest to sketch first. All normal lines will be parallel to one of the three isometric axes. • Fill in additional details (inclined planes, oblique planes, rounded edges, etc.) • For holes or rounded features: • Locate the "enclosing parallelogram" • Sketch the major and minor axes • Locate the midpoints for each side of the "enclosing parallelogram" • Sketch the ellipse, making sure that it is tangent to each midpoint. • The major axis of the ellipse is along the longest diagonal of the "enclosing parallelogram" and the minor axis is along the shortest diagonal.

  5. Lecture #2 EGR 110 – Engineering Graphics Example: Sketch an isometric drawing for the 3-view layout below (Problem A-5 in Engineering Graphics Workbook, Series 1).

  6. Lecture #2 EGR 110 – Engineering Graphics Example: Sketch an isometric drawing for the 3-view layout below (Problem A-7 in Engineering Graphics Workbook, Series 1).

  7. Lecture #2 EGR 110 – Engineering Graphics Example: Sketch an isometric drawing for the 3-view layout below.

  8. Lecture #2 EGR 110 – Engineering Graphics Example: Sketch an isometric drawing for the 2-view layout below.

More Related