1 / 83

Conducting Bicycle and Pedestrian Counts in Your Community: Count Manager Training

Conducting Bicycle and Pedestrian Counts in Your Community: Count Manager Training. MnDot Bicycle and Pedestrian Counting Initiative. MnDOT Bicycle and Pedestrian Counting Initiative. The MnDOT Research Some reasons for counting. The MnDOT Bike and Ped Counting Research Project.

newton
Download Presentation

Conducting Bicycle and Pedestrian Counts in Your Community: Count Manager Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Conducting Bicycle and Pedestrian Counts in Your Community: Count Manager Training MnDot Bicycle and Pedestrian Counting Initiative

  2. MnDOT Bicycle and Pedestrian Counting Initiative • The MnDOT Research • Some reasons for counting

  3. The MnDOT Bike and Ped Counting Research Project • New initiative to encourage communities to count non-motorized traffic - bicyclists and pedestrians • Information, training, and technical support for new local counting bike and ped programs • Guidance for annual field counts • Support for pilot automated counting projects • Central repository for count data

  4. Bike & Ped Counts Needed to Achieve MnDOT Priorities • 2050 Vision – Minnesota Go: to support multi-modal systems • Complete Streets: to understand vehicle, bicycle, and pedestrian interactions • Toward Zero Deaths: to assess exposure and effectiveness of safety programs • Performance measures: to assess progress towards state’s transportation goals

  5. MnDOT Bike & Ped Initiative Based on Other Successful Programs • Designed to integrate with MnDOT motor vehicle count program • Builds on experience of Minnesota communities, DOT initiatives in CO & WA, and the National Bicycle and Pedestrian Demonstration Project • Consistent with FHWA protocols in new Traffic Monitoring Guide

  6. MnDOT reasons for counting … • Bicycling and walking are important modes of transportation • Few bike and ped traffic counts available • Traffic counts needed to • Plan complete transportation systems • Invest resources in facilities and maintenance operations more efficiently • Assess effectiveness of safety interventions

  7. MDH reasons for counting Aligns with health improvement efforts Provides SHIP grantees with TA Establishes baseline for community evaluation efforts Leverages resources and partnerships

  8. Counting Basics Motor Vehicle Traffic Local Collaboration Types of Counts Manual vs. Automatic How local counts feed into the Statewide project

  9. Modeled on MnDOTMotor Vehicle Count Program • FHWA guidelines, MnDOT management and protocols, and local cooperation • Network of 1,000+ permanent, continuous counters and 30,000+ locations for short duration (48 hour) counts • Used to report Annual Average Daily Traffic (AADT) and measure Vehicle Miles Traveled (VMT)

  10. Local Collaboration Key to Success • Minnesota local governments and nonprofit organizations have pioneered local counting programs • Local governments are mostly responsible for roads with most bike and ped traffic • No federal or state financial support for bike and ped counting programs

  11. Some Counting Basics • All counts are estimates • Main purposes for counting • Measure volumes (AADT, VMT)* • Measure turning movements • Understand behaviors • Types of counts • Screenline counts (volumes, behaviors)* • Intersection counts (turning movements, safety/crash studies) • Approaches to counting • Manual, field observations (short duration)* • Automated counts (continuous) *Focus of this presentation

  12. Types of counts

  13. Screenline Counts Screenline counts: Imaginary line perpendicular to street Count all persons on bike or feet who cross screenline within street right-of-way Count both directions Use consistent location for observation

  14. Manual vs. Automated Counts • Manual counts • Good for short periods at multiple locations • “Snapshots” do not reveal traffic patterns and are hard to extrapolate • Automated counts • Provide continuous counts at limited number of locations • Needed to develop adjustment factors for extrapolating short term counts

  15. How local counts fit into the statewide project Replicate what was done in Twin Cities around the state Short duration counts help make the models more accurate for different types of facilities and size communities

  16. Non-motorized traffic counts Minneapolis, MN

  17. Counts by road/facility type

  18. Daily patterns in non-motorized traffic (n=43)

  19. Scaling factors for “daily” traffic Example: Multiplying 4-5 pm traffic by 8.4 yields 12-hour traffic volume.

  20. Conducting Bicycle and Pedestrian Counts:Volunteer Training MnDot Bicycle and Pedestrian Counting Initiative

  21. Volunteer Training Dates for counting Using the forms Defining Bicyclist and Pedestrians

  22. Dates for the first MnDOT Counts • September 11, 12, 13, 2012 (Tu, Wed, TH) • Peak hour: 4:00 p.m. – 6:00 or 7:00 p.m. • 12-hour day: 7:00 a.m. – 7:00 p.m. • September 15 (Sat) • Peak hours: 10:00 a.m. – noon or 2:00 p.m. • 12 hour day: 7:00 a.m. – 7:00 p.m. • Rain dates: Sept. 18, 19, 20, 22

  23. How to Use MnDOT Counting Form Complete all of the fields on both sides of this form. Count all bicyclists and pedestrians crossing your screen line under the appropriate categories. Make only one tally mark for each person. Count for two hours in 15 minute increments. Count bicyclists who ride on the sidewalk. Count the number of people on the bicycle (i.e., bicyclists), not the number of bicycles. Pedestrians include all people not on bicycles. Record pedestrians in wheelchairs, on skates, on scooters, etc. in “Pedestrians Assisted” columns. Do your best when traffic volumes are high or people talk to you; it is easy to lost count. Do your best, but note if you lose track. If traffic volumes are high count bicycle and pedestrian totals and disregard other attributes.

  24. How to Use MnDOT Counting Form

  25. Conducting the count Two-hour counts (4:00 -6:00 pm) Start on time (arrive early!) Include name, date & Location with ID See instructions on form *Make a note of any unusual thing that impacted the count at the bottom of the sheet or in space on back.

  26. Recording Bikes and Peds Every person (bicyclist or pedestrian) is always counted. Other attributes also may be tallied, including gender, direction of travel, or use of helmet, depending on purpose.

  27. Defining bikes and walkers Bicycles – all pedal powered vehicles: tandems, recumbents, 3 wheelers, tag-alongs, trailers Walkers – people on foot or assisted: joggers, skaters, segways, wheel chairs, strollers, crutches, scooters, children being carried, person walking a bicycle

  28. Example of Count Tallies

  29. Example 1 One male bicyclist

  30. Example 2 One using assistive device (wheelchair) Two female pedestrians I I Image from PBIC Image Library www.pedbikeimages.org

  31. Example 3 One male bicyclist I

  32. Example 4 Four pedestrians: Three female; One male Two children Two Assist I II I Image from PBIC Image Library www.pedbikeimages.org

  33. Example 5 Two cyclists: One male; One female Also a child Image from Alta Planning National Bicycle and Pedestrian Documentation Project Examples courtesy of Alta Planning National Bicycle and Pedestrian Documentation Project I I

  34. Example 6 Four pedestrians One male; Three female Two female bicyclists; One child I III I I Image from PBIC Image Library www.pedbikeimages.org

  35. Example 7 Two on assistive devices (in-line skates) 5 male pedestrians; Two bicyclists: One male; One female III I II I Image from PBIC Image Library www.pedbikeimages.org

  36. Example 8 Image from Alta Planning National Bicycle and Pedestrian Documentation Project Five bicyclists: Three male; Two female; Three - children Count each person not each bike! Examples courtesy of Alta Planning National Bicycle and Pedestrian Documentation Project II I I I

  37. What to Take on Day of Count Instructions Location maps Count forms Clipboards Pens, pencils, and spares Watch, phone, or timepiece Public information sheet Safety vest (may be available from MnDOT) Optional: hat, sunscreen, jacket, folding chair …

  38. How to Interact with Public • Counter must • Maintain focus on counting • Explain politely what he or she is doing and reasons for count • Note if count interrupted • Provide person interrupting with print information about count (see example)

  39. Work Zone Safety Considerations • Your counting locations represents a “transportation work zone” • Safety is your primary concern; do not take risks • Wear safety vest or high visibility colors • Do not interfere with traffic flow • Contact count manager if questions arise

  40. Thank You Your contact info here

  41. Managing a Count Program Count Manager Role Selecting Count locations Recruit, Train and Schedule volunteers Conduct Counts Report Counts

  42. Steps in Starting a Counting Program • Consider the 5 W’s and an H* • Consult stakeholders and determine purpose • Confirm partnerships • Select locations, and create maps • Recruit and train counters* • Conduct counts • Report results to MnDOT • Evaluate experience and plan next count *Focus of presentation

  43. Timeline2012 MnDOT Bike and Ped Counts

  44. Consider the 5 W’s and an H • Why count in my community? • Who will do the counts? • Where will the counts be taken? • What information will be collected? • When will the counts be taken? • How will the counts be taken?

  45. A. Why count in my community? • Document bike and ped traffic on particular streets • Evaluate use of bicycle lanes, sidewalks, trails, and other facilities • Assess programs like Safe Routes to Schools • Implement Complete Streets policies • Evaluate State Health Improvement Plan strategies • Other - consult stakeholders

  46. B. Who will perform the counts? • Local Count Manager will lead count • Employees or volunteers will perform counts • People and partners depend on purpose • Public works for traffic signaling • Planning department for evidence for plans • Parks & recreation for measuring trail use • Public Health for active living evaluations • Nonprofits and advocates for documenting need

  47. C. Where will the counts be taken? • Locations where you need information • Arterials, collector, or local streets (mid-block) • Sidewalks (mid-block) • Bicycle or pedestrian facilities such as multi-use trails (shared-use paths) • Intersections (more complex) • Downtown near businesses • Near schools, parks, and other important destinations

  48. Factors in Choice of Count Locations • Counts taken at location previously • Existing or proposed bike or ped facilities • Number of accidents or collisions • Presence of transit options • Stakeholder interest in location • Land use mix • Accessibility and safety for counters

  49. Goal is to Count at Multiple Locations • Many counts needed to understand variation in traffic over space and time • Resource limitations prevent random or representative samples of entire community • Strive for many locations (> 3 initially) • Examples • Met Council counts trail users at > 500 sites • Minneapolis DPW & Transit for Livable Communities count annually at > 250 locations

  50. Examples Bridge or other pinch point Trail Bike Lane Destination

More Related