1 / 15

Carrying out EFA - stages

Carrying out EFA - stages. Ensure that data are suitable Decide on the model - PAF or PCA Decide how many factors are required to represent you data When using PAF estimate the communality of each factor Factor extraction Rotate the factors ensuring that simple structure has been reached

neviah
Download Presentation

Carrying out EFA - stages

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Carrying out EFA - stages • Ensure that data are suitable • Decide on the model - PAF or PCA • Decide how many factors are required to represent you data • When using PAF estimate the communality of each factor • Factor extraction • Rotate the factors ensuring that simple structure has been reached • Compute factor scores

  2. Stage1 - Data suitability • Packages will happily churn out results on any data! • Must be continuous, categorical = inappropriate • Variables are normally distributed and outliers have been appropriately dealt with • Relationship between all variables appear to be linear or at least not U-shaped or J shaped • All variable are independent - thus variables cannot be calculated from any other variables • e.g., if item a was height and b was weight then it would be inappropriate for c to be a height to weight ratio since it would necessarily be correlated to both a and b

  3. Stage1 - Data suitability • There are at least some correlations in the matrix that are above .3 • If correlations are smaller than this then there would seem to be no real relationship between any of the items • Must be at least 100 participants and more participants than items • Nunnally (1978) advocates 10 times as many participants as items • Barrett & Kline (1981) so long as no. of Ps > than items then ratio is not as important

  4. Stage 2 - Model • The PCA is the simplest - sufficient for any analysis performed at an undergraduate level • Carroll argues is nonsense since all items must have unique variance Stage 3 - deciding on No. of factors to extract • Theory and past experience • If increasing the number of factors does not increase the simplicity then it is of little use - result should always be plausible • Large correlations (>.5) between factors should be considered as suspect

  5. Identifying No. of Factors • Different tests produce different results • Kaiser-Guttman criterion - generated factors with eigenvalues above 1 are removed as real factors • Problem - is sensitive to the number of items. Increase in items = increase in eigenvalue. • Scree test - based on eigenvalues of an unrotated PC solution - depends on the relative values of eigenvalues and therefore should be independent of item number

  6. 2 Factors to be extracted • Going from left to right draw the first straight line that shows the data leveling of - elbow • No. of factors = the number of factors above this line

  7. Stage 4 - Estimation of the communality • PCA - assumed to be 100% and therefore no estimation required • With PAF no agreed way to do this

  8. I2 I1 F1 I3 I4 F2 Stage 5 - Factor extraction • Initially factors are placed arbitrarily • Successive factors are placed • At right angles to each other • In a position that explains a substantial amount of variance of the items

  9. Stage 6 - Factor rotation • Changes the position of the factors to ease interpretation • Each factor should have some large loadings and some small ones - each factor should only have substantial loadings on only a few items - known as simple structure • Large number of mediocre loadings should be avoided

  10. Table showing rotated and unrotated solutions for 4 hypothetical items Notice • Communality of each variable remains the same • Eigenvalues do not • Factors are positioned such that the variance of the squared loadings is as large as possible - most stat packages use VARIMAX • MAXimises the VARIance of the (squared factor loadings)

  11. Factor scores • Score on anyone factor can be determined by considering the responses to items that load onto that factor • Can take into account the factor loading such that item with greater loading have a higher weighting • Factor scores are determined through the sum of scores produced on all the relevant items

  12. Hierarchical FA • If factors are obliquely rotated the resultant matrix of correlations can itself be factor-analysed – hierarchical analysis or second-order analysis • Can be difficult to conceptualise what such a higher order factor might represent

  13. EFA vs CFA • EFA seeks to determine the number and nature of factors which underpin a set of data • CFA allows you to choose between alternative hypotheses which purport to represent your data • Given a set of data you could determine which factor theory of personality best represented the data

  14. CFA • Can be carried out by principle axis factoring or principle components method • Is the simplest form of Structural equation modelling • Packages that have been created specially to perform EFA • LISREL • EQS

  15. Errors of Factor Analysis • Interpreting the unrotated solution • Applying rigid rules to the extraction of factors – KG vs Scree method. Which solution makes most sense? • Replication is very important • Factor validity is not attested to only by item content (face validity). Must be compared with some other measure

More Related